[PATCH] drm/radeon: Clean up errors in trinity_dpm.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix the following errors reported by checkpatch:

ERROR: that open brace { should be on the previous line
ERROR: space prohibited before that ',' (ctx:WxW)
ERROR: need consistent spacing around '-' (ctx:WxV)

Signed-off-by: GuoHua Chen <chenguohua_716@xxxxxxx>
---
 drivers/gpu/drm/radeon/kv_dpm.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/radeon/kv_dpm.c b/drivers/gpu/drm/radeon/kv_dpm.c
index f7735da07feb..55dbf450bd9c 100644
--- a/drivers/gpu/drm/radeon/kv_dpm.c
+++ b/drivers/gpu/drm/radeon/kv_dpm.c
@@ -64,8 +64,7 @@ extern void cik_exit_rlc_safe_mode(struct radeon_device *rdev);
 extern void cik_update_cg(struct radeon_device *rdev,
 			  u32 block, bool enable);
 
-static const struct kv_pt_config_reg didt_config_kv[] =
-{
+static const struct kv_pt_config_reg didt_config_kv[] = {
 	{ 0x10, 0x000000ff, 0, 0x0, KV_CONFIGREG_DIDT_IND },
 	{ 0x10, 0x0000ff00, 8, 0x0, KV_CONFIGREG_DIDT_IND },
 	{ 0x10, 0x00ff0000, 16, 0x0, KV_CONFIGREG_DIDT_IND },
@@ -931,9 +930,9 @@ static void kv_calculate_dfs_bypass_settings(struct radeon_device *rdev)
 					pi->graphics_level[i].ClkBypassCntl = 2;
 				else if (kv_get_clock_difference(table->entries[i].clk, 26600) < 200)
 					pi->graphics_level[i].ClkBypassCntl = 7;
-				else if (kv_get_clock_difference(table->entries[i].clk , 20000) < 200)
+				else if (kv_get_clock_difference(table->entries[i].clk, 20000) < 200)
 					pi->graphics_level[i].ClkBypassCntl = 6;
-				else if (kv_get_clock_difference(table->entries[i].clk , 10000) < 200)
+				else if (kv_get_clock_difference(table->entries[i].clk, 10000) < 200)
 					pi->graphics_level[i].ClkBypassCntl = 8;
 				else
 					pi->graphics_level[i].ClkBypassCntl = 0;
@@ -1577,7 +1576,7 @@ static void kv_set_valid_clock_range(struct radeon_device *rdev,
 			if ((new_ps->levels[0].sclk -
 			     table->entries[pi->highest_valid].sclk_frequency) >
 			    (table->entries[pi->lowest_valid].sclk_frequency -
-			     new_ps->levels[new_ps->num_levels -1].sclk))
+			     new_ps->levels[new_ps->num_levels - 1].sclk))
 				pi->highest_valid = pi->lowest_valid;
 			else
 				pi->lowest_valid =  pi->highest_valid;
-- 
2.17.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux