Le 04/01/2024 à 13:41, Quentin Schulz a écrit :
From: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
devm_gpiod_get_optional may return EPROBE_DEFER in case the GPIO
controller isn't yet probed when the panel driver is being probed.
In that case, a spurious and confusing error message about not being
able to get the reset GPIO is printed even though later on the device
actually manages to get probed.
Use dev_err_probe instead so that the message is only printed when it
truly matters.
Cc: Quentin Schulz <foss+kernel@xxxxxxxxx>
Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxxxxx>
Reviewed-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
index 30919c872ac8d..ecfa4181c4fd9 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
@@ -646,10 +646,8 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
return -EINVAL;
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(ctx->reset_gpio)) {
- dev_err(dev, "cannot get reset gpio\n");
- return PTR_ERR(ctx->reset_gpio);
- }
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), "cannot get reset gpio\n");
ctx->vci = devm_regulator_get(dev, "vci");
if (IS_ERR(ctx->vci)) {
