Prefer using the struct drm_edid based functions.
Cc: Adrien Grassein <adrien.grassein@xxxxxxxxx>
Cc: Andrzej Hajda <andrzej.hajda@xxxxxxxxx>
Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Cc: Robert Foss <rfoss@xxxxxxxxxx>
Cc: Laurent Pinchart <Laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Jonas Karlman <jonas@xxxxxxxxx>
Cc: Jernej Skrabec <jernej.skrabec@xxxxxxxxx>
Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
---
drivers/gpu/drm/bridge/lontium-lt8912b.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/bridge/lontium-lt8912b.c
index 9c0ffc1c6fac..e7c4bef74aa4 100644
--- a/drivers/gpu/drm/bridge/lontium-lt8912b.c
+++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c
@@ -620,8 +620,8 @@ lt8912_bridge_detect(struct drm_bridge *bridge)
return lt8912_check_cable_status(lt);
}
-static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge,
- struct drm_connector *connector)
+static const struct drm_edid *lt8912_bridge_edid_read(struct drm_bridge *bridge,
+ struct drm_connector *connector)
{
struct lt8912 *lt = bridge_to_lt8912(bridge);
@@ -630,7 +630,7 @@ static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge,
* given to the hdmi connector node.
*/
if (lt->hdmi_port->ops & DRM_BRIDGE_OP_EDID)
- return drm_bridge_get_edid(lt->hdmi_port, connector);
+ return drm_bridge_edid_read(lt->hdmi_port, connector);
dev_warn(lt->dev, "The connected bridge does not supports DRM_BRIDGE_OP_EDID\n");
return NULL;
@@ -642,7 +642,7 @@ static const struct drm_bridge_funcs lt8912_bridge_funcs = {
.mode_set = lt8912_bridge_mode_set,
.enable = lt8912_bridge_enable,
.detect = lt8912_bridge_detect,
- .get_edid = lt8912_bridge_get_edid,
+ .edid_read = lt8912_bridge_edid_read,
};
static int lt8912_bridge_resume(struct device *dev)
--
2.39.2
