It turns out that I had misconfigured the device I was using the panel
with; the bus data polarity is not high for this panel, I had to change
the config on the display controller's side.
Fix the panel config to properly reflect its accurate settings.
Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
index ea5a85779382..f23d8832a1ad 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
@@ -309,7 +309,7 @@ static const struct s6d7aa0_panel_desc s6d7aa0_lsl080al02_desc = {
.off_func = s6d7aa0_lsl080al02_off,
.drm_mode = &s6d7aa0_lsl080al02_mode,
.mode_flags = MIPI_DSI_MODE_VSYNC_FLUSH | MIPI_DSI_MODE_VIDEO_NO_HFP,
- .bus_flags = DRM_BUS_FLAG_DE_HIGH,
+ .bus_flags = 0,
.has_backlight = false,
.use_passwd3 = false,
--
2.43.0
