The series adds display support for the stm32f769-disco board. It has been tested on hardware revisions MB1225-B03 and MB1166-A09. This required modifications to the nt35510 driver. As I do not have the Hydis HVA40WV1 display, it would be better if someone tested the driver in that configuration. Dario Binacchi (8): dt-bindings: mfd: stm32f7: Add binding definition for DSI ARM: dts: stm32: add DSI support on stm32f769 ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco ARM: dts: stm32: add display support on stm32f769-disco dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK ARM: dts: add stm32f769-disco-mb1225-revb03-mb1166-reva09 drm/panel: nt35510: refactor panel initialization drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK .../display/panel/novatek,nt35510.yaml | 20 +- arch/arm/boot/dts/st/Makefile | 1 + ...f769-disco-mb1225-revb03-mb1166-reva09.dts | 13 + arch/arm/boot/dts/st/stm32f769-disco.dts | 78 +- arch/arm/boot/dts/st/stm32f769.dtsi | 21 + drivers/gpu/drm/panel/panel-novatek-nt35510.c | 872 +++++------------- include/dt-bindings/mfd/stm32f7-rcc.h | 1 + 7 files changed, 362 insertions(+), 644 deletions(-) create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1225-revb03-mb1166-reva09.dts create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi -- 2.43.0