Add bindings for the BOE TH101MB31IG002-28A LCD panel. It is used e.g. in the Pine64 Pinetab2 and PinetabV. Signed-off-by: Manuel Traut <manut@xxxxxxxxx> --- .../display/panel/boe,th101mb31ig002-28a.yaml | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml new file mode 100644 index 000000000000..32df26cbfeed --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE TH101MB31IG002-28A WXGA DSI Display Panel + +maintainers: + - Manuel Traut <manut@xxxxxxxxx> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel + - boe,th101mb31ig002-28a + + reg: true + backlight: true + enable-gpios: true + power-supply: true + port: true + rotation: true + +required: + - compatible + - reg + - enable-gpios + - power-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,th101mb31ig002-28a"; + reg = <0>; + backlight = <&backlight_lcd0>; + enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>; + rotation = <90>; + power-supply = <&vcc_3v3>; + port { + panel_in_dsi: endpoint { + remote-endpoint = <&dsi_out_con>; + }; + }; + }; + }; + +... -- 2.43.0
