From: Maxime Ripard <mripard@xxxxxxxxxx>
The tmds_rate field in the inno_hdmi structure is used mostly to
configure the internal i2c controller divider through a call to the
inno_hdmi_i2c_init() function.
We can simply make that rate an argument to that function, which also
removes a workaround to initialize the divider at probe time when we
don't have a mode yet.
Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
Tested-by: Alex Bee <knaerzche@xxxxxxxxx>
Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx>
---
changes in v3:
- imported patch
changes in v4:
- none
drivers/gpu/drm/rockchip/inno_hdmi.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c
index 04344ee1265d..102195837206 100644
--- a/drivers/gpu/drm/rockchip/inno_hdmi.c
+++ b/drivers/gpu/drm/rockchip/inno_hdmi.c
@@ -56,8 +56,6 @@ struct inno_hdmi {
struct inno_hdmi_i2c *i2c;
struct i2c_adapter *ddc;
- unsigned int tmds_rate;
-
struct hdmi_data_info hdmi_data;
};
@@ -134,11 +132,11 @@ static inline void hdmi_modb(struct inno_hdmi *hdmi, u16 offset,
hdmi_writeb(hdmi, offset, temp);
}
-static void inno_hdmi_i2c_init(struct inno_hdmi *hdmi)
+static void inno_hdmi_i2c_init(struct inno_hdmi *hdmi, unsigned long long rate)
{
- int ddc_bus_freq;
+ unsigned long long ddc_bus_freq = rate >> 2;
- ddc_bus_freq = (hdmi->tmds_rate >> 2) / HDMI_SCL_RATE;
+ do_div(ddc_bus_freq, HDMI_SCL_RATE);
hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF);
hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF);
@@ -421,8 +419,7 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
* DCLK_LCDC, so we need to init the TMDS rate to mode pixel
* clock rate, and reconfigure the DDC clock.
*/
- hdmi->tmds_rate = mode->clock * 1000;
- inno_hdmi_i2c_init(hdmi);
+ inno_hdmi_i2c_init(hdmi, mode->clock * 1000);
/* Unmute video and audio output */
hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,
@@ -800,8 +797,7 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
* PCLK_HDMI, so we need to init the TMDS rate to PCLK rate,
* and reconfigure the DDC clock.
*/
- hdmi->tmds_rate = clk_get_rate(hdmi->pclk);
- inno_hdmi_i2c_init(hdmi);
+ inno_hdmi_i2c_init(hdmi, clk_get_rate(hdmi->pclk));
ret = inno_hdmi_register(drm, hdmi);
if (ret)
--
2.43.0
