The controller wants the difference between *total and *sync_start in the HDMI_VIDEO_EXT_*DELAY registers. Otherwise the signal is very unstable for certain non-VIC modes. See downstream commit [0]. [0] https://github.com/rockchip-linux/kernel/commit/8eb559f2502c Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Co-developed-by: Zheng Yang <zhengyang@xxxxxxxxxxxxxx> Signed-off-by: Zheng Yang <zhengyang@xxxxxxxxxxxxxx> Signed-off-by: Alex Bee <knaerzche@xxxxxxxxx> --- changes in v2: - none changes in v3: - none changes in v4: - none drivers/gpu/drm/rockchip/inno_hdmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c index 6e5b922a121e..345253e033c5 100644 --- a/drivers/gpu/drm/rockchip/inno_hdmi.c +++ b/drivers/gpu/drm/rockchip/inno_hdmi.c @@ -412,7 +412,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi, hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_L, value & 0xFF); hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HBLANK_H, (value >> 8) & 0xFF); - value = mode->hsync_start - mode->hdisplay; + value = mode->htotal - mode->hsync_start; hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_L, value & 0xFF); hdmi_writeb(hdmi, HDMI_VIDEO_EXT_HDELAY_H, (value >> 8) & 0xFF); @@ -427,7 +427,7 @@ static int inno_hdmi_config_video_timing(struct inno_hdmi *hdmi, value = mode->vtotal - mode->vdisplay; hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VBLANK, value & 0xFF); - value = mode->vsync_start - mode->vdisplay; + value = mode->vtotal - mode->vsync_start; hdmi_writeb(hdmi, HDMI_VIDEO_EXT_VDELAY, value & 0xFF); value = mode->vsync_end - mode->vsync_start; -- 2.43.0
