On 22/12/2023 12:05, Manuel Traut wrote:
> Add bindings for the BOE TH101MB31IG002-28A LCD panel. It is
> used e.g. in the Pine64 Pinetab2 and PinetabV.
>
> Signed-off-by: Manuel Traut <manut@xxxxxxxxx>
> ---
> +
> +maintainers:
> + - Manuel Traut <manut@xxxxxxxxx>
> +
> +allOf:
> + - $ref: panel-common.yaml#
> +
> +properties:
> + compatible:
> + enum:
> + # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
> + - boe,th101mb31ig002-28a
> +
> + reg:
reg: true
> + description: the virtual channel number of a DSI peripheral
> +
> + backlight:
: true
> + description: phandle of the backlight device attached to the panel
Because there is really no need to repeat obvious.
> +
> + enable-gpios:
> + description: a GPIO spec for the enable pin
Ditto
> +
> + power-supply:
> + description: core voltage supply
Ditto
> +
> +
And drop redundant blank lines.
> + ports: true
Hm, why ports? From where did you copy it?
> + rotation: true
> +
> +required:
> + - compatible
> + - reg
> + - enable-gpios
> + - power-supply
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + dsi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + panel@0 {
> + compatible = "boe,th101mb31ig002-28a";
> + reg = <0>;
> + backlight = <&backlight_lcd0>;
> + enable-gpios = <&pio 45 0>;
Use define for GPIO flag.
Best regards,
Krzysztof
