Hi Andy, Am Donnerstag, 7. Dezember 2023, 08:59:06 CET schrieb Andy Yan: > From: Andy Yan <andy.yan@xxxxxxxxxxxxxx> > > This patch sets aims at enable the VOP2 support on rk3588. > > Main feature of VOP2 on rk3588: > Four video ports: > VP0 Max 4096x2160 > VP1 Max 4096x2160 > VP2 Max 4096x2160 > VP3 Max 2048x1080 > > 4 4K Cluster windows with AFBC/line RGB and AFBC-only YUV support > 4 4K Esmart windows with line RGB/YUV support > > The current version support all the 8 windows with all the suppported > plane format. > > And we don't have a upstreamed encoder/connector(HDMI/DP) for rk3588 > yet, Cristian from collabora is working on adding upstream support for > HDMI on rk3588. > > My current test(1080P/4KP60) is runing with a HDMI driver pick from > downstream bsp kernel. > > A branch based on linux-6.7 rc4 containing all the series and > HDMI driver(not compatible with mainline rk3568 hdmi) picked > from downstream bsp kernel is available [0]. > > [0]https://github.com/andyshrk/linux/commits/rk3588-vop2-upstream-linux-6.7-rc4-2023-12-07 > > Changes in v4: > - fix the POST_BUF_EMPTY irq when set mode > - use full stop at all the description's end. > - address Krzysztof's review about dt-binding in v3 > - keep all VOP2_FEATURE_HAS_xxx macros increase in order. > - address Sascha's review about debugfs > - Add const for rockchip,rk3588-iommu compatible very nice, the error messages on "mode changes" are gone now. Display and even combination with panthor still work of my rk3588-board Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
