Chroma Down Sampling (CDM) block is a hardware block in the DPU pipeline which among other things has a CSC block that can convert RGB input from the DPU to YUV data. This block can be used with either HDMI, DP or writeback interface. In this series, lets first add the support for CDM block to be used with writeback and then follow-up with support for other interfaces such as DP. This was validated by adding support to pass custom output format to the IGT's kms_writeback test-case, specifically only for the output dump test-case [1]. The usage for this is: ./kms_writeback -d -f <name of the DRM YUV fmt from igt_fb> So for NV12, this can be verified with the below command: ./kms_writeback -d -f NV12 [1] : https://patchwork.freedesktop.org/series/122125/ changes in v2: - rebased on top of current msm-next-lumag - fix commit text of some of the patches - move csc matrices to dpu_hw_util as they span across DPU - move cdm blk define to dpu_hw_catalog as its common across chipsets - remove bit magic in dpu_hw_cdm with relevant defines - use drmm_kzalloc instead of kzalloc/free - protect bind_pingpong_blk with core_rev check - drop setup_csc_data() and setup_cdwn() ops as they are merged into enable() - protect bind_pingpong_blk with core_rev check - drop setup_csc_data() and setup_cdwn() ops as they are merged into enable() - move needs_cdm to topology struct - call update_pending_flush_cdm even when bind_pingpong_blk is not present - drop usage of setup_csc_data() and setup_cdwn() cdm ops as they both have been merged into enable() - drop reduntant hw_cdm and hw_pp checks - drop fb related checks from dpu_encoder::atomic_mode_set() - introduce separate wb2_format arrays for rgb and yuv Abhinav Kumar (16): drm/msm/dpu: add formats check for writeback encoder drm/msm/dpu: rename dpu_encoder_phys_wb_setup_cdp to match its functionality drm/msm/dpu: fix writeback programming for YUV cases drm/msm/dpu: move csc matrices to dpu_hw_util drm/msm/dpu: add cdm blocks to sc7280 dpu_hw_catalog drm/msm/dpu: add cdm blocks to sm8250 dpu_hw_catalog drm/msm/dpu: add dpu_hw_cdm abstraction for CDM block drm/msm/dpu: add cdm blocks to RM drm/msm/dpu: add support to allocate CDM from RM drm/msm/dpu: add CDM related logic to dpu_hw_ctl layer drm/msm/dpu: add support to disable CDM block during encoder cleanup drm/msm/dpu: add an API to setup the CDM block for writeback drm/msm/dpu: plug-in the cdm related bits to writeback setup drm/msm/dpu: reserve cdm blocks for writeback in case of YUV output drm/msm/dpu: introduce separate wb2_format arrays for rgb and yuv drm/msm/dpu: add cdm blocks to dpu snapshot drivers/gpu/drm/msm/Makefile | 1 + .../msm/disp/dpu1/catalog/dpu_10_0_sm8650.h | 4 +- .../msm/disp/dpu1/catalog/dpu_6_0_sm8250.h | 5 +- .../msm/disp/dpu1/catalog/dpu_6_2_sc7180.h | 4 +- .../msm/disp/dpu1/catalog/dpu_7_2_sc7280.h | 5 +- .../msm/disp/dpu1/catalog/dpu_9_0_sm8550.h | 4 +- drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 37 +++ .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 5 + .../drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 117 +++++++- .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 47 ++- .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 13 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c | 276 ++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h | 114 ++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 35 +++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h | 12 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 7 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.c | 71 +++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_util.h | 8 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_wb.c | 3 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 4 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 39 +-- drivers/gpu/drm/msm/disp/dpu1/dpu_rm.c | 51 +++- drivers/gpu/drm/msm/disp/dpu1/dpu_rm.h | 2 + drivers/gpu/drm/msm/msm_drv.h | 2 + 25 files changed, 815 insertions(+), 52 deletions(-) create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.c create mode 100644 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_cdm.h -- 2.40.1
