A few of the DRM_PANEL entries have become out of alphabetical order, so move them around a bit to restore alpha order. Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx> Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Cc: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx> Cc: Sam Ravnborg <sam@xxxxxxxxxxxx> Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx> Cc: Maxime Ripard <mripard@xxxxxxxxxx> Cc: Thomas Zimmermann <tzimmermann@xxxxxxx> Cc: David Airlie <airlied@xxxxxxxxx> Cc: Daniel Vetter <daniel@xxxxxxxx> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx --- drivers/gpu/drm/panel/Kconfig | 90 ++++++++++++++++---------------- 1 file changed, 45 insertions(+), 45 deletions(-) diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -95,34 +95,6 @@ config DRM_PANEL_LVDS handling of power supplies or control signals. It implements automatic backlight handling if the panel is attached to a backlight controller. -config DRM_PANEL_SIMPLE - tristate "support for simple panels (other than eDP ones)" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - help - DRM panel driver for dumb non-eDP panels that need at most a regulator - and a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. - -config DRM_PANEL_EDP - tristate "support for simple Embedded DisplayPort panels" - depends on OF - depends on BACKLIGHT_CLASS_DEVICE - depends on PM - select VIDEOMODE_HELPERS - select DRM_DISPLAY_DP_HELPER - select DRM_DISPLAY_HELPER - select DRM_DP_AUX_BUS - select DRM_KMS_HELPER - help - DRM panel driver for dumb eDP panels that need at most a regulator and - a GPIO to be powered up. Optionally a backlight can be attached so - that it can be automatically turned off when the panel goes into a - low power state. - config DRM_PANEL_EBBG_FT8719 tristate "EBBG FT8719 panel driver" depends on OF @@ -317,12 +289,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829 24 bit RGB per pixel. It provides a MIPI DSI interface to the host and has a built-in LED backlight. -config DRM_PANEL_SAMSUNG_LD9040 - tristate "Samsung LD9040 RGB/SPI panel" - depends on OF && SPI - depends on BACKLIGHT_CLASS_DEVICE - select VIDEOMODE_HELPERS - config DRM_PANEL_LG_LB035Q02 tristate "LG LB035Q024573 RGB panel" depends on GPIOLIB && OF && SPI @@ -350,6 +316,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966 with the Magnachip D53E6EA8966 panel IC. This panel receives video data via DSI but commands via 9-bit SPI using DBI. +config DRM_PANEL_MANTIX_MLAF057WE51 + tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for the Mantix + MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It + has a resolution of 720x1440 pixels, a built in backlight and touch + controller. + config DRM_PANEL_NEC_NL8048HL11 tristate "NEC NL8048HL11 RGB panel" depends on GPIOLIB && OF && SPI @@ -438,17 +415,6 @@ config DRM_PANEL_NOVATEK_NT39016 Say Y here if you want to enable support for the panels built around the Novatek NT39016 display controller. -config DRM_PANEL_MANTIX_MLAF057WE51 - tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" - depends on OF - depends on DRM_MIPI_DSI - depends on BACKLIGHT_CLASS_DEVICE - help - Say Y here if you want to enable support for the Mantix - MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It - has a resolution of 720x1440 pixels, a built in backlight and touch - controller. - config DRM_PANEL_OLIMEX_LCD_OLINUXINO tristate "Olimex LCD-OLinuXino panel" depends on OF @@ -566,6 +532,12 @@ config DRM_PANEL_SAMSUNG_DB7430 DB7430 DPI display controller used in such devices as the LMS397KF04 480x800 DPI panel. +config DRM_PANEL_SAMSUNG_LD9040 + tristate "Samsung LD9040 RGB/SPI panel" + depends on OF && SPI + depends on BACKLIGHT_CLASS_DEVICE + select VIDEOMODE_HELPERS + config DRM_PANEL_SAMSUNG_S6D16D0 tristate "Samsung S6D16D0 DSI video mode panel" depends on OF @@ -774,6 +746,34 @@ config DRM_PANEL_STARTEK_KD070FHFID015 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller. +config DRM_PANEL_EDP + tristate "support for simple Embedded DisplayPort panels" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DP_AUX_BUS + select DRM_KMS_HELPER + help + DRM panel driver for dumb eDP panels that need at most a regulator and + a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + +config DRM_PANEL_SIMPLE + tristate "support for simple panels (other than eDP ones)" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + depends on PM + select VIDEOMODE_HELPERS + help + DRM panel driver for dumb non-eDP panels that need at most a regulator + and a GPIO to be powered up. Optionally a backlight can be attached so + that it can be automatically turned off when the panel goes into a + low power state. + config DRM_PANEL_TDO_TL070WSH30 tristate "TDO TL070WSH30 DSI panel" depends on OF