Re: [PATCH v2 11/12] drm/rockchip: vop2: Add debugfs support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 29, 2023 at 07:01:37PM +0800, Andy Yan wrote:
> Hi Sascha:
> 
> 
> 
> On 11/29/23 16:52, Sascha Hauer wrote:
> > On Mon, Nov 27, 2023 at 06:56:34PM +0800, Andy Yan wrote:
> > >     Hi Sascha:
> > > 
> > >     thanks for you review.
> > > 
> > >     On 11/27/23 18:13, Sascha Hauer wrote:
> > > 
> > >   On Wed, Nov 22, 2023 at 08:56:01PM +0800, Andy Yan wrote:
> > > 
> > >   From: Andy Yan [1]<andy.yan@xxxxxxxxxxxxxx>
> > > 
> > >   /sys/kernel/debug/dri/vop2/summary:  dump vop display state
> > >   /sys/kernel/debug/dri/vop2/regs: dump whole vop registers
> > >   /sys/kernel/debug/dri/vop2/active_regs: only dump the registers of
> > >   activated modules
> > > 
> > >   Signed-off-by: Andy Yan [2]<andy.yan@xxxxxxxxxxxxxx>
> > >   ---
> > > 
> > >   (no changes since v1)
> > > 
> > >    drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 399 +++++++++++++++++++
> > >    1 file changed, 399 insertions(+)
> > > 
> > >   diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> > >   index 9eecbe1f71f9..4a2342209c15 100644
> > >   --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> > >   +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
> > >   @@ -27,6 +27,7 @@
> > >    #include <drm/drm_debugfs.h>
> > >    #include <drm/drm_flip_work.h>
> > >    #include <drm/drm_framebuffer.h>
> > >   +#include <drm/drm_gem_framebuffer_helper.h>
> > >    #include <drm/drm_probe_helper.h>
> > >    #include <drm/drm_vblank.h>
> > > 
> > >   @@ -187,6 +188,7 @@ struct vop2 {
> > >            */
> > >           u32 registered_num_wins;
> > > 
> > >   +       struct resource *res;
> > >           void __iomem *regs;
> > >           struct regmap *map;
> > > 
> > >   @@ -228,6 +230,44 @@ struct vop2 {
> > >    #define vop2_output_if_is_lvds(x)      (x == ROCKCHIP_VOP2_EP_LVDS0 || x == ROCKCHIP_VOP2_EP_LVDS1)
> > >    #define vop2_output_if_is_dpi(x)       (x == ROCKCHIP_VOP2_EP_RGB0)
> > > 
> > >   +struct vop2_regs_dump {
> > >   +       const char *name;
> > >   +       u32 base;
> > >   +       u32 en_reg;
> > >   +       u32 en_val;
> > >   +       u32 en_mask;
> > >   +};
> > >   +
> > >   +/*
> > >   + * bus-format types.
> > >   + */
> > >   +struct drm_bus_format_enum_list {
> > >   +       int type;
> > >   +       const char *name;
> > >   +};
> > >   +
> > >   +static const struct drm_bus_format_enum_list drm_bus_format_enum_list[] = {
> > >   +       { DRM_MODE_CONNECTOR_Unknown, "Unknown" },
> > >   +       { MEDIA_BUS_FMT_RGB565_1X16, "RGB565_1X16" },
> > >   +       { MEDIA_BUS_FMT_RGB666_1X18, "RGB666_1X18" },
> > >   +       { MEDIA_BUS_FMT_RGB666_1X24_CPADHI, "RGB666_1X24_CPADHI" },
> > >   +       { MEDIA_BUS_FMT_RGB666_1X7X3_SPWG, "RGB666_1X7X3_SPWG" },
> > >   +       { MEDIA_BUS_FMT_YUV8_1X24, "YUV8_1X24" },
> > >   +       { MEDIA_BUS_FMT_UYYVYY8_0_5X24, "UYYVYY8_0_5X24" },
> > >   +       { MEDIA_BUS_FMT_YUV10_1X30, "YUV10_1X30" },
> > >   +       { MEDIA_BUS_FMT_UYYVYY10_0_5X30, "UYYVYY10_0_5X30" },
> > >   +       { MEDIA_BUS_FMT_RGB888_3X8, "RGB888_3X8" },
> > >   +       { MEDIA_BUS_FMT_RGB888_1X24, "RGB888_1X24" },
> > >   +       { MEDIA_BUS_FMT_RGB888_1X7X4_SPWG, "RGB888_1X7X4_SPWG" },
> > >   +       { MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA, "RGB888_1X7X4_JEIDA" },
> > >   +       { MEDIA_BUS_FMT_UYVY8_2X8, "UYVY8_2X8" },
> > >   +       { MEDIA_BUS_FMT_YUYV8_1X16, "YUYV8_1X16" },
> > >   +       { MEDIA_BUS_FMT_UYVY8_1X16, "UYVY8_1X16" },
> > >   +       { MEDIA_BUS_FMT_RGB101010_1X30, "RGB101010_1X30" },
> > >   +       { MEDIA_BUS_FMT_YUYV10_1X20, "YUYV10_1X20" },
> > >   +};
> > >   +static DRM_ENUM_NAME_FN(drm_get_bus_format_name, drm_bus_format_enum_list)
> > >   +
> > >    static const struct regmap_config vop2_regmap_config;
> > > 
> > >    static struct vop2_video_port *to_vop2_video_port(struct drm_crtc *crtc)
> > >   @@ -2487,6 +2527,363 @@ static const struct drm_crtc_helper_funcs vop2_crtc_helper_funcs = {
> > >           .atomic_disable = vop2_crtc_atomic_disable,
> > >    };
> > > 
> > >   +static void vop2_dump_connector_on_crtc(struct drm_crtc *crtc, struct seq_file *s)
> > >   +{
> > >   +       struct drm_connector_list_iter conn_iter;
> > >   +       struct drm_connector *connector;
> > >   +
> > >   +       drm_connector_list_iter_begin(crtc->dev, &conn_iter);
> > >   +       drm_for_each_connector_iter(connector, &conn_iter) {
> > >   +               if (crtc->state->connector_mask & drm_connector_mask(connector))
> > >   +                       seq_printf(s, "    Connector: %s\n", connector->name);
> > >   +
> > >   +       }
> > >   +       drm_connector_list_iter_end(&conn_iter);
> > >   +}
> > >   +
> > >   +static int vop2_plane_state_dump(struct seq_file *s, struct drm_plane *plane)
> > >   +{
> > >   +       struct vop2_win *win = to_vop2_win(plane);
> > >   +       struct drm_plane_state *pstate = plane->state;
> > >   +       struct drm_rect *src, *dst;
> > >   +       struct drm_framebuffer *fb;
> > >   +       struct drm_gem_object *obj;
> > >   +       struct rockchip_gem_object *rk_obj;
> > >   +       bool xmirror;
> > >   +       bool ymirror;
> > >   +       bool rotate_270;
> > >   +       bool rotate_90;
> > >   +       dma_addr_t fb_addr;
> > >   +       int i;
> > >   +
> > >   +       seq_printf(s, "    %s: %s\n", win->data->name, pstate->crtc ? "ACTIVE" : "DISABLED");
> > >   +       if (!pstate || !pstate->fb)
> > >   +               return 0;
> > >   +
> > >   +       fb = pstate->fb;
> > >   +       src = &pstate->src;
> > >   +       dst = &pstate->dst;
> > >   +       xmirror = pstate->rotation & DRM_MODE_REFLECT_X ? true : false;
> > >   +       ymirror = pstate->rotation & DRM_MODE_REFLECT_Y ? true : false;
> > >   +       rotate_270 = pstate->rotation & DRM_MODE_ROTATE_270;
> > >   +       rotate_90 = pstate->rotation & DRM_MODE_ROTATE_90;
> > >   +
> > >   +       seq_printf(s, "\twin_id: %d\n", win->win_id);
> > >   +
> > >   +       seq_printf(s, "\tformat: %p4cc%s glb_alpha[0x%x]\n",
> > >   +                  &fb->format->format,
> > >   +                  drm_is_afbc(fb->modifier) ? "[AFBC]" : "",
> > >   +                  pstate->alpha >> 8);
> > >   +       seq_printf(s, "\trotate: xmirror: %d ymirror: %d rotate_90: %d rotate_270: %d\n",
> > >   +                  xmirror, ymirror, rotate_90, rotate_270);
> > >   +       seq_printf(s, "\tzpos: %d\n", pstate->normalized_zpos);
> > >   +       seq_printf(s, "\tsrc: pos[%d, %d] rect[%d x %d]\n", src->x1 >> 16,
> > >   +                  src->y1 >> 16, drm_rect_width(src) >> 16,
> > >   +                  drm_rect_height(src) >> 16);
> > >   +       seq_printf(s, "\tdst: pos[%d, %d] rect[%d x %d]\n", dst->x1, dst->y1,
> > >   +                  drm_rect_width(dst), drm_rect_height(dst));
> > >   +
> > >   +       for (i = 0; i < fb->format->num_planes; i++) {
> > >   +               obj = fb->obj[0];
> > >   +               rk_obj = to_rockchip_obj(obj);
> > >   +               fb_addr = rk_obj->dma_addr + fb->offsets[0];
> > >   +
> > >   +               seq_printf(s, "\tbuf[%d]: addr: %pad pitch: %d offset: %d\n",
> > >   +                          i, &fb_addr, fb->pitches[i], fb->offsets[i]);
> > >   +       }
> > >   +
> > >   +       return 0;
> > >   +}
> > >   +
> > >   +static int vop2_crtc_state_dump(struct drm_crtc *crtc, struct seq_file *s)
> > >   +{
> > >   +       struct vop2_video_port *vp = to_vop2_video_port(crtc);
> > >   +       struct drm_crtc_state *cstate = crtc->state;
> > >   +       struct rockchip_crtc_state *vcstate;
> > >   +       struct drm_display_mode *mode;
> > >   +       struct drm_plane *plane;
> > >   +       bool interlaced;
> > >   +
> > >   +       seq_printf(s, "Video Port%d: %s\n", vp->id, !cstate ?
> > >   +                  "DISABLED" : cstate->active ? "ACTIVE" : "DISABLED");
> > >   +
> > >   +       if (!cstate || !cstate->active)
> > >   +               return 0;
> > >   +
> > >   +       mode = &crtc->state->adjusted_mode;
> > >   +       vcstate = to_rockchip_crtc_state(cstate);
> > >   +       interlaced = !!(mode->flags & DRM_MODE_FLAG_INTERLACE);
> > >   +
> > >   +       vop2_dump_connector_on_crtc(crtc, s);
> > >   +       seq_printf(s, "\tbus_format[%x]: %s\n", vcstate->bus_format,
> > >   +                   drm_get_bus_format_name(vcstate->bus_format));
> > >   +       seq_printf(s, "\toutput_mode[%x]", vcstate->output_mode);
> > >   +       seq_printf(s, " color_space[%d]\n", vcstate->color_space);
> > >   +       seq_printf(s, "    Display mode: %dx%d%s%d\n",
> > >   +                   mode->hdisplay, mode->vdisplay, interlaced ? "i" : "p",
> > >   +                   drm_mode_vrefresh(mode));
> > >   +       seq_printf(s, "\tclk[%d] real_clk[%d] type[%x] flag[%x]\n",
> > >   +                   mode->clock, mode->crtc_clock, mode->type, mode->flags);
> > >   +       seq_printf(s, "\tH: %d %d %d %d\n", mode->hdisplay, mode->hsync_start,
> > >   +                   mode->hsync_end, mode->htotal);
> > >   +       seq_printf(s, "\tV: %d %d %d %d\n", mode->vdisplay, mode->vsync_start,
> > >   +                   mode->vsync_end, mode->vtotal);
> > >   +
> > >   +       drm_atomic_crtc_for_each_plane(plane, crtc) {
> > >   +               vop2_plane_state_dump(s, plane);
> > >   +       }
> > >   +
> > >   +       return 0;
> > >   +}
> > >   +
> > >   +static int vop2_summary_show(struct seq_file *s, void *data)
> > >   +{
> > >   +       struct drm_info_node *node = s->private;
> > >   +       struct drm_minor *minor = node->minor;
> > >   +       struct drm_device *drm_dev = minor->dev;
> > >   +       struct drm_crtc *crtc;
> > >   +
> > >   +       drm_modeset_lock_all(drm_dev);
> > >   +       drm_for_each_crtc(crtc, drm_dev) {
> > >   +               vop2_crtc_state_dump(crtc, s);
> > >   +       }
> > >   +       drm_modeset_unlock_all(drm_dev);
> > >   +
> > >   +       return 0;
> > >   +}
> > >   +
> > >   +static void vop2_regs_print(struct vop2 *vop2, struct seq_file *s, struct vop2_regs_dump *dump)
> > >   +{
> > >   +       resource_size_t start;
> > >   +       const int reg_num = 0x110 / 4;
> > > 
> > >   If I'm not mistaken this prints a register space of 0x110 bytes.
> > >   Shouldn't it be 0x100 bytes instead?
> > > 
> > >   Also, are all these register spaces really have the same size? Does it
> > >   make sense to add the size to struct vop2_regs_dump?
> > > 
> > >     In fact, most used registers of the most blocks are not more than 100, but
> > >     for Cluster windows,
> > > 
> > >     there is a CLUSTER_CTRL register sting at 0x100.
> > > 
> > >     I think i should add the size to struct vop2_regs_dump.
> > > 
> > > 
> > >   +       u32 val;
> > >   +       int i;
> > >   +
> > >   +       if (dump->en_mask) {
> > >   +               val = vop2_readl(vop2, dump->base + dump->en_reg);
> > >   +               if ((val & dump->en_mask) != dump->en_val)
> > >   +                       return;
> > >   +       }
> > >   +       seq_printf(s, "\n%s:\n", dump->name);
> > >   +
> > >   +       start = vop2->res->start + dump->base;
> > >   +       for (i = 0; i < reg_num;) {
> > >   +               seq_printf(s, "%08x:  %08x %08x %08x %08x\n", (u32)start + i * 4,
> > >   +                          vop2_readl(vop2, dump->base + (4 * i)),
> > >   +                          vop2_readl(vop2, dump->base + (4 * (i + 1))),
> > >   +                          vop2_readl(vop2, dump->base + (4 * (i + 2))),
> > >   +                          vop2_readl(vop2, dump->base + (4 * (i + 3))));
> > >   +               i += 4;
> > >   +       }
> > >   +
> > >   +}
> > >   +
> > >   +static int vop2_regs_show(struct seq_file *s, void *arg)
> > >   +{
> > >   +       struct drm_info_node *node = s->private;
> > >   +       struct vop2 *vop2 = (struct vop2 *)node->info_ent->data;
> > >   +       struct drm_minor *minor = node->minor;
> > >   +       struct drm_device *drm_dev = minor->dev;
> > >   +
> > >   +       struct vop2_regs_dump dump;
> > >   +
> > >   +       drm_modeset_lock_all(drm_dev);
> > >   +
> > >   +       if (vop2->enable_count) {
> > >   +               dump.en_mask = 0;
> > >   +
> > >   +               dump.name = "SYS";
> > >   +               dump.base = RK3568_REG_CFG_DONE;
> > >   +               vop2_regs_print(vop2, s, &dump);
> > > 
> > >   Can you create a statically initialized array of struct vop2_regs_dump
> > >   and iterate over it?
> > >   You would need an additional present_in_soc_xy flag in struct
> > >   vop2_regs_dump, but other than that I don't see a problem and the result
> > >   might look better.
> > > 
> > >   For the windows it might also be an option to iterate over
> > >   vop2->data->win instead. This array already contains the register base
> > >   addresses and window names.
> > > 
> > >     In fact, we have a dump_regs  arrar in vop2_data per soc in our bsp
> > >     kernel[0],
> > > 
> > >     do you like something like that?
> > > 
> > >     [0]
> > >     [3]https://github.com/armbian/linux-rockchip/blob/rk-5.10-rkr6/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c#L3684
> > 
> > This looks good from a first glance. I would suggest using C99
> > initializers though.
> 
> 
> Thanks for your reply, but am not quiet claer about the C99 initializers, would you plase make it more specific,
> or give some example ?

Instead of:

static const struct vop_dump_regs rk3588_dump_regs[] = {
	{ RK3568_REG_CFG_DONE, "SYS", {0}, 0 },

do:

static const struct vop_dump_regs rk3588_dump_regs[] = {
	{
		.offset = RK3568_REG_CFG_DONE.
		.name = "SYS"
	},
	...

It's a bit more verbose but better readable for people who don't know
the order of the struct members.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux