The tmds_rate field in the inno_hdmi structure is used mostly to configure the internal i2c controller divider through a call to the inno_hdmi_i2c_init() function. We can simply make that rate an argument to that function, which also removes a workaround to initialize the divider at probe time when we don't have a mode yet. Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx> --- drivers/gpu/drm/rockchip/inno_hdmi.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/gpu/drm/rockchip/inno_hdmi.c b/drivers/gpu/drm/rockchip/inno_hdmi.c index f05417c6b637..35f44e556fcf 100644 --- a/drivers/gpu/drm/rockchip/inno_hdmi.c +++ b/drivers/gpu/drm/rockchip/inno_hdmi.c @@ -50,8 +50,6 @@ struct inno_hdmi { struct inno_hdmi_i2c *i2c; struct i2c_adapter *ddc; - - unsigned int tmds_rate; }; static struct inno_hdmi *encoder_to_inno_hdmi(struct drm_encoder *encoder) @@ -155,11 +153,11 @@ static inline void hdmi_modb(struct inno_hdmi *hdmi, u16 offset, hdmi_writeb(hdmi, offset, temp); } -static void inno_hdmi_i2c_init(struct inno_hdmi *hdmi) +static void inno_hdmi_i2c_init(struct inno_hdmi *hdmi, unsigned long long rate) { - int ddc_bus_freq; + unsigned long long ddc_bus_freq = rate >> 2; - ddc_bus_freq = (hdmi->tmds_rate >> 2) / HDMI_SCL_RATE; + do_div(ddc_bus_freq, HDMI_SCL_RATE); hdmi_writeb(hdmi, DDC_BUS_FREQ_L, ddc_bus_freq & 0xFF); hdmi_writeb(hdmi, DDC_BUS_FREQ_H, (ddc_bus_freq >> 8) & 0xFF); @@ -389,8 +387,7 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi, * DCLK_LCDC, so we need to init the TMDS rate to mode pixel * clock rate, and reconfigure the DDC clock. */ - hdmi->tmds_rate = mode->clock * 1000; - inno_hdmi_i2c_init(hdmi); + inno_hdmi_i2c_init(hdmi, mode->clock * 1000); /* Unmute video and audio output */ hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK, @@ -768,8 +765,7 @@ static int inno_hdmi_bind(struct device *dev, struct device *master, * PCLK_HDMI, so we need to init the TMDS rate to PCLK rate, * and reconfigure the DDC clock. */ - hdmi->tmds_rate = clk_get_rate(hdmi->pclk); - inno_hdmi_i2c_init(hdmi); + inno_hdmi_i2c_init(hdmi, clk_get_rate(hdmi->pclk)); ret = inno_hdmi_register(drm, hdmi); if (ret) -- 2.41.0