Re: [PATCH v2 10/12] drm/rockchip: vop2: Add support for rk3588

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andy,

Looks good overall, two small things inside.

On Wed, Nov 22, 2023 at 08:55:44PM +0800, Andy Yan wrote:
>  
> +#define vop2_output_if_is_hdmi(x)	(x == ROCKCHIP_VOP2_EP_HDMI0 || x == ROCKCHIP_VOP2_EP_HDMI1)
> +#define vop2_output_if_is_dp(x)		(x == ROCKCHIP_VOP2_EP_DP0 || x == ROCKCHIP_VOP2_EP_DP1)
> +#define vop2_output_if_is_edp(x)	(x == ROCKCHIP_VOP2_EP_EDP0 || x == ROCKCHIP_VOP2_EP_EDP1)
> +#define vop2_output_if_is_mipi(x)	(x == ROCKCHIP_VOP2_EP_MIPI0 || x == ROCKCHIP_VOP2_EP_MIPI1)
> +#define vop2_output_if_is_lvds(x)	(x == ROCKCHIP_VOP2_EP_LVDS0 || x == ROCKCHIP_VOP2_EP_LVDS1)
> +#define vop2_output_if_is_dpi(x)	(x == ROCKCHIP_VOP2_EP_RGB0)

Not that it matters in practice here, but you should add braces around
the x argument in the macros usage, i.e. ((x) == ROCKCHIP_VOP2_EP_RGB0)

> +static unsigned long rk3588_set_intf_mux(struct vop2_video_port *vp, int id, u32 polflags)
> +{
> +	struct vop2 *vop2 = vp->vop2;
> +	int dclk_core_div, dclk_out_div, if_pixclk_div, if_dclk_div;
> +	unsigned long clock;
> +	u32 die, dip, div, vp_clk_div, val;
> +
> +	clock = rk3588_calc_cru_cfg(vp, id, &dclk_core_div, &dclk_out_div,
> +				    &if_pixclk_div, &if_dclk_div);
> +	if (!clock)
> +		return 0;
> +
> +	vp_clk_div = FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_CORE_DIV, dclk_core_div);
> +	vp_clk_div |= FIELD_PREP(RK3588_VP_CLK_CTRL__DCLK_OUT_DIV, dclk_out_div);
> +
> +	die = vop2_readl(vop2, RK3568_DSP_IF_EN);
> +	dip = vop2_readl(vop2, RK3568_DSP_IF_POL);
> +	div = vop2_readl(vop2, RK3568_DSP_IF_CTRL);
> +
> +	switch (id) {
> +	case ROCKCHIP_VOP2_EP_HDMI0:
> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_DCLK_DIV, if_dclk_div);

you should clear the bits of a mask before setting them again. The same
goes for several other bits modified in this switch/case.

> +		div |= FIELD_PREP(RK3588_DSP_IF_EDP_HDMI0_PCLK_DIV, if_pixclk_div);
> +		die &= ~RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX;
> +		die |= RK3588_SYS_DSP_INFACE_EN_HDMI0 |
> +			    FIELD_PREP(RK3588_SYS_DSP_INFACE_EN_EDP_HDMI0_MUX, vp->id);
> +		val = rk3588_get_hdmi_pol(polflags);
> +		regmap_write(vop2->vop_grf, RK3588_GRF_VOP_CON2, HIWORD_UPDATE(1, 1, 1));
> +		regmap_write(vop2->vo1_grf, RK3588_GRF_VO1_CON0, HIWORD_UPDATE(val, 6, 5));
> +		break;

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux