Hi Conor, On 24/11/2023 13:36, Conor Dooley wrote:
On Fri, Nov 24, 2023 at 09:41:15AM +0100, Neil Armstrong wrote:The amlogic,g12a-mipi-dphy-analog is a feature of the simple-mfd amlogic,meson-axg-hhi-sysctrl system control register zone which is an intermixed registers zone, thus it's very hard to define clear ranges for each SoC controlled features even if possible. The amlogic,g12a-mipi-dphy-analog was wrongly documented as an independent register range, which is not the reality, thus fix the bindings by dropping the reg property now it's referred from amlogic,meson-gx-hhi-sysctrl.yaml and documented as a subnode of amlogic,meson-axg-hhi-sysctrl. Also drop the unnecessary example, the top level bindings example should be enough. Fixes: 76ab79f9726c ("dt-bindings: phy: add Amlogic G12A Analog MIPI D-PHY bindings") Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>I feel like I left a tag on this one before, but I can't remember. Perhaps I missed the conclusion to the discussion to the discussion with Rob about whether having "reg" was desirable that lead to a tag being dropped?
I checked again and nope, not tag, but Rob's question was legitimate and I reworded and clarified the commit message following your reviews. On the other side you suggested a Fixes tag, which I added. The rewording is about why reg doesn't make sense on the nature of the memory region and it doesn't make sense here like other similar nodes. Neil
--- .../bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml index c8c83acfb871..81c2654b7e57 100644 --- a/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml +++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-mipi-dphy-analog.yaml @@ -16,20 +16,8 @@ properties: "#phy-cells": const: 0- reg:- maxItems: 1 - required: - compatible - - reg - "#phy-cells"additionalProperties: false- -examples: - - | - phy@0 { - compatible = "amlogic,g12a-mipi-dphy-analog"; - reg = <0x0 0xc>; - #phy-cells = <0>; - }; -- 2.34.1
