Il 21/11/23 18:08, Krzysztof Kozlowski ha scritto:
On 21/11/2023 17:55, Boris Brezillon wrote:
On Tue, 21 Nov 2023 17:11:42 +0100
AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
wrote:
Il 21/11/23 16:34, Krzysztof Kozlowski ha scritto:
On 08/11/2023 14:20, Steven Price wrote:
On 02/11/2023 14:15, AngeloGioacchino Del Regno wrote:
The layout of the registers {TILER,SHADER,L2}_PWROFF_LO, used to request
powering off cores, is the same as the {TILER,SHADER,L2}_PWRON_LO ones:
this means that in order to request poweroff of cores, we are supposed
to write a bitmask of cores that should be powered off!
This means that the panfrost_gpu_power_off() function has always been
doing nothing.
Fix powering off the GPU by writing a bitmask of the cores to poweroff
to the relevant PWROFF_LO registers and then check that the transition
(from ON to OFF) has finished by polling the relevant PWRTRANS_LO
registers.
While at it, in order to avoid code duplication, move the core mask
logic from panfrost_gpu_power_on() to a new panfrost_get_core_mask()
function, used in both poweron and poweroff.
Fixes: f3ba91228e8e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Hi,
This commit was added to next recently but it causes "external abort on
non-linefetch" during boot of my Odroid HC1 board.
At least bisect points to it.
If fixed, please add:
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
[ 4.861683] 8<--- cut here ---
[ 4.863429] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf0c8802c
[ 4.871018] [f0c8802c] *pgd=433ed811, *pte=11800653, *ppte=11800453
...
[ 5.164010] panfrost_gpu_irq_handler from __handle_irq_event_percpu+0xcc/0x31c
[ 5.171276] __handle_irq_event_percpu from handle_irq_event+0x38/0x80
[ 5.177765] handle_irq_event from handle_fasteoi_irq+0x9c/0x250
[ 5.183743] handle_fasteoi_irq from generic_handle_domain_irq+0x28/0x38
[ 5.190417] generic_handle_domain_irq from gic_handle_irq+0x88/0xa8
[ 5.196741] gic_handle_irq from generic_handle_arch_irq+0x34/0x44
[ 5.202893] generic_handle_arch_irq from __irq_svc+0x8c/0xd0
Full log:
https://krzk.eu/#/builders/21/builds/4392/steps/11/logs/serial0
Hey Krzysztof,
This is interesting. It might be about the cores that are missing from the partial
core_mask raising interrupts, but an external abort on non-linefetch is strange to
see here.
I've seen such external aborts in the past, and the fault type has
often been misleading. It's unlikely to have anything to do with a
Yeah, often accessing device with power or clocks gated.
Except my commit does *not* gate SoC power, nor SoC clocks 🙂
What the "Really power off ..." commit does is to ask the GPU to internally power
off the shaders, tilers and L2, that's why I say that it is strange to see that
kind of abort.
The GPU_INT_CLEAR GPU_INT_STAT, GPU_FAULT_STATUS and GPU_FAULT_ADDRESS_{HI/LO}
registers should still be accessible even with shaders, tilers and cache OFF.
Anyway, yes, synchronizing IRQs before calling the poweroff sequence would also
work, but that'd add up quite a bit of latency on the runtime_suspend() call, so
in this case I'd be more for avoiding to execute any register r/w in the handler
by either checking if the GPU is supposed to be OFF, or clearing interrupts, which
may not work if those are generated after the execution of the poweroff function.
Or we could simply disable the irq after power_off, but that'd be hacky (as well).
Let's see if asking to poweroff *everything* works:
---
drivers/gpu/drm/panfrost/panfrost_gpu.c | 14 +++++++++++---
1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/panfrost/panfrost_gpu.c
b/drivers/gpu/drm/panfrost/panfrost_gpu.c
index 09f5e1563ebd..1c7276aaa182 100644
--- a/drivers/gpu/drm/panfrost/panfrost_gpu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_gpu.c
@@ -429,21 +429,29 @@ void panfrost_gpu_power_off(struct panfrost_device *pfdev)
int ret;
u32 val;
- gpu_write(pfdev, SHADER_PWROFF_LO, pfdev->features.shader_present & core_mask);
+ gpu_write(pfdev, SHADER_PWROFF_LO, pfdev->features.shader_present);
+ gpu_write(pfdev, SHADER_PWROFF_HI, U32_MAX);
ret = readl_relaxed_poll_timeout(pfdev->iomem + SHADER_PWRTRANS_LO,
val, !val, 1, 1000);
if (ret)
dev_err(pfdev->dev, "shader power transition timeout");
gpu_write(pfdev, TILER_PWROFF_LO, pfdev->features.tiler_present);
+ gpu_write(pfdev, TILER_PWROFF_HI, U32_MAX);
ret = readl_relaxed_poll_timeout(pfdev->iomem + TILER_PWRTRANS_LO,
val, !val, 1, 1000);
if (ret)
dev_err(pfdev->dev, "tiler power transition timeout");
- gpu_write(pfdev, L2_PWROFF_LO, pfdev->features.l2_present & core_mask);
+ gpu_write(pfdev, L2_PWROFF_LO, pfdev->features.l2_present);
ret = readl_poll_timeout(pfdev->iomem + L2_PWRTRANS_LO,
- val, !val, 0, 1000);
+ val, !val, 0, 1000);
+ if (ret)
+ dev_err(pfdev->dev, "l2_low power transition timeout");
+
+ gpu_write(pfdev, L2_PWROFF_HI, U32_MAX);
+ ret = readl_poll_timeout(pfdev->iomem + L2_PWRTRANS_HI,
+ val, !val, 0, 1000);
if (ret)
dev_err(pfdev->dev, "l2 power transition timeout");
}
--
2.42.0
Cheers,
Angelo
non-linefetch access, but it might be caused by a register access after
the clock or power domain driving the register bank has been disabled.
The following diff might help validate this theory. If that works, we
probably want to make sure we synchronize IRQs before disabling in the
suspend path.
--->8---
diff --git a/drivers/gpu/drm/panfrost/panfrost_regs.h b/drivers/gpu/drm/panfrost/panfrost_regs.h
index 55ec807550b3..98df66e5cc9b 100644
--- a/drivers/gpu/drm/panfrost/panfrost_regs.h
+++ b/drivers/gpu/drm/panfrost/panfrost_regs.h
@@ -34,8 +34,6 @@
(GPU_IRQ_FAULT |\
GPU_IRQ_MULTIPLE_FAULT |\
GPU_IRQ_RESET_COMPLETED |\
- GPU_IRQ_POWER_CHANGED |\
- GPU_IRQ_POWER_CHANGED_ALL |\
This helped, at least for this issue (next-20231121). Much later in
user-space boot I have lockups:
watchdog: BUG: soft lockup - CPU#4 stuck for 26s! [kworker/4:1:61]
[ 56.329224] smp_call_function_single from
__sync_rcu_exp_select_node_cpus+0x29c/0x78c
[ 56.337111] __sync_rcu_exp_select_node_cpus from
sync_rcu_exp_select_cpus+0x334/0x878
[ 56.344995] sync_rcu_exp_select_cpus from wait_rcu_exp_gp+0xc/0x18
[ 56.351231] wait_rcu_exp_gp from process_one_work+0x20c/0x620
[ 56.357038] process_one_work from worker_thread+0x1d0/0x488
[ 56.362668] worker_thread from kthread+0x104/0x138
[ 56.367521] kthread from ret_from_fork+0x14/0x28
But anyway the external abort does not appear.
Best regards,
Krzysztof
