Hi Am 18.11.23 um 16:06 schrieb Sui Jingfeng:
Hi, On 2023/11/16 17:59, Thomas Zimmermann wrote:Detecting the ast device's chipset type and configuration mode involves several registers, DT properties and possibly POSTing parts of the chip. It is preferable to do this before initializing the DRM driver, so that that each chip type can have an individual setup code. The patchset addresses the problem by moving all early detection code before the allocation of the ast device. Patch one gets a lock out of the way. The lock is only relevant for mode setting. Move it there. Patches 2 and 3 rework the detection of the correct I/O memory ranges. It is now self-contained, more readable and works without an instance of struct ast_device. Patches 4 to 7 rework the setup of various registers that are required for detection. Access helpers for I/O can now operate without an instance of struct ast_device. The setup functions operate on the I/O ranges that have been made available with patch 3, but again without struct ast_device. With the detection's internals done, patches 8 and 9 rework the chip's and config-mode's detection code to operate without struct ast_device as well. Finally, patch 10 moves the detection code into the PCI probe function. it runs before any of the DRM device code. The function for creating an ast device, ast_device_create(), receives the detected I/O memory ranges, chip type and configuration mode. This cleans up the detection code. There is more chip-specific code in other parts of the driver. In a later patch, the ast device setup can be split up so that each chip type gets its own code path that does not interfere with other chips. Tested on AST1100 and AST2100.Tested-by: Sui Jingfeng <suijingfeng@xxxxxxxxxxx> Still works, The whole series is tested with AST2400 hardware on X86-64.
Thanks a lot. I'll fix up the typo you spotted when I merge the patches. Best regards Thomas
$ sudo dmesg | grep "03:00.0" ast 0000:03:00.0: Using P2A bridge for configuration ast 0000:03:00.0: AST 2400 detected ast 0000:03:00.0: [drm] Using analog VGA ast 0000:03:00.0: [drm] dram MCLK=396 Mhz type=6 bus_width=16 [drm] Initialized ast 0.1.0 20120228 for 0000:03:00.0 on minor 0 ast 0000:03:00.0: [drm] fb0: astdrmfb frame buffer devicev2: * add missing break statements (Jocelyn) * fix length test for I/O range Thomas Zimmermann (10): drm/ast: Turn ioregs_lock to modeset_lock drm/ast: Rework I/O register setup drm/ast: Retrieve I/O-memory ranges without ast device drm/ast: Add I/O helpers without ast device drm/ast: Enable VGA without ast device instance drm/ast: Enable MMIO without ast device instance drm/ast: Partially implement POST without ast device instance drm/ast: Add enum ast_config_mode drm/ast: Detect ast device type and config mode without ast device drm/ast: Move detection code into PCI probe helper drivers/gpu/drm/ast/ast_drv.c | 263 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/ast/ast_drv.h | 101 +++++++++---- drivers/gpu/drm/ast/ast_main.c | 244 ++---------------------------- drivers/gpu/drm/ast/ast_mode.c | 26 ++-- drivers/gpu/drm/ast/ast_post.c | 73 +++++---- drivers/gpu/drm/ast/ast_reg.h | 12 +- 6 files changed, 413 insertions(+), 306 deletions(-) base-commit: b7816c393496dc4497c1327310821407f7171d8b prerequisite-patch-id: 0aa359f6144c4015c140c8a6750be19099c676fb prerequisite-patch-id: c67e5d886a47b7d0266d81100837557fda34cb24 prerequisite-patch-id: cbc453ee02fae02af22fbfdce56ab732c7a88c36
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstrasse 146, 90461 Nuernberg, Germany GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman HRB 36809 (AG Nuernberg)
Attachment:
OpenPGP_signature.asc
Description: OpenPGP digital signature
