This is used to specify the page start address offset of the display RAM. The value is used as offset when setting the page start address with the SSD130X_SET_PAGE_RANGE command, and the driver currently sets its value to 1 if the property is not present in the Device Tree. But the datasheet mentions that the value on reset for the page start is a 0, so it makes more sense to also have 0 as the default value for the page offset if the property is not present. In fact, using a default value of 1 leads to the display not working when the fbdev is attached to the framebuffer console. Reported-by: Sahaj Sarup <sahaj.sarup@xxxxxxxxxx> Signed-off-by: Javier Martinez Canillas <javierm@xxxxxxxxxx> --- drivers/video/fbdev/ssd1307fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c index 5ae48e36fccb..34f014bf4994 100644 --- a/drivers/video/fbdev/ssd1307fb.c +++ b/drivers/video/fbdev/ssd1307fb.c @@ -637,7 +637,7 @@ static int ssd1307fb_probe(struct i2c_client *client) par->height = 16; if (device_property_read_u32(dev, "solomon,page-offset", &par->page_offset)) - par->page_offset = 1; + par->page_offset = 0; if (device_property_read_u32(dev, "solomon,col-offset", &par->col_offset)) par->col_offset = 0; -- 2.41.0