On Mon, Jul 29, 2013 at 12:14 PM, Joshua C. <joshuacov@xxxxxxxxx> wrote: > 2013/7/29 Alex Deucher <alexdeucher@xxxxxxxxx>: >> On Mon, Jul 29, 2013 at 10:09 AM, Markus Trippelsdorf >> <markus@xxxxxxxxxxxxxxx> wrote: >>> On 2013.07.29 at 09:58 -0400, Alex Deucher wrote: >>>> On Mon, Jul 29, 2013 at 3:51 AM, Markus Trippelsdorf >>>> <markus@xxxxxxxxxxxxxxx> wrote: >>>> > On my test machine Xorg doesn't start anymore when I kexec into a >>>> > 3.11.0-rc3 kernel. >>>> >>>> With kexec, dpm doesn't get torn down properly which can result in a >>>> bad hardware state when the driver loads again. Does the attached >>>> patch help? It attempts to disable dpm at startup in case it wasn't >>>> torn down properly previously. >>> >>> dpm initialization now works, but unfortunately GPU acceleration still gets >>> disabled: >> >> Stupid kexec complicates things. We need to make sure dpm is torn >> down before we init the rest of the GPU, but dpm needs get initialized >> later in the init process since it depends on certain other state from >> the driver. I need to think about this for a bit. I'm not sure of a >> good way to handle this. >> >> Alex >> >>> >>> [drm] Initialized drm 1.1.0 20060810 [135/1104] >>> [drm] radeon kernel modesetting enabled. >>> [drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D). >>> [drm] register mmio base: 0xFBEE0000 >>> [drm] register mmio size: 65536 >>> ATOM BIOS: 113 >>> radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used) >>> radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF >>> [drm] Detected VRAM RAM=128M, BAR=128M >>> [drm] RAM width 32bits DDR >>> [TTM] Zone kernel: Available graphics memory: 4082356 kiB >>> [TTM] Zone dma32: Available graphics memory: 2097152 kiB >>> [TTM] Initializing pool allocator >>> [TTM] Initializing DMA pool allocator >>> [drm] radeon: 128M of VRAM memory ready >>> [drm] radeon: 512M of GTT memory ready. >>> [drm] GART: num cpu pages 131072, num gpu pages 131072 >>> [drm] Loading RS780 Microcode >>> [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). >>> radeon 0000:01:05.0: WB enabled >>> radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880215c30c00 >>> radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880215c30c0c >>> [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). >>> [drm] Driver supports precise vblank timestamp query. >>> [drm] radeon: irq initialized. >>> radeon 0000:01:05.0: setting latency timer to 64 >>> [drm] ring test on 0 succeeded in 1 usecs >>> [drm:r600_dma_ring_test] *ERROR* radeon: ring 3 test failed (0xCAFEDEAD) >>> radeon 0000:01:05.0: disabling GPU acceleration >>> radeon 0000:01:05.0: ffff8802161cfc00 unpin not necessary >>> [drm] Radeon Display Connectors >>> [drm] Connector 0: >>> [drm] VGA-1 >>> [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c >>> [drm] Encoders: >>> [drm] CRT1: INTERNAL_KLDSCP_DAC1 >>> [drm] Connector 1: >>> [drm] DVI-D-1 >>> [drm] HPD3 >>> [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c >>> [drm] Encoders: >>> [drm] DFP3: INTERNAL_KLDSCP_LVTMA >>> == power state 0 == >>> ui class: none >>> internal class: boot >>> caps: video >>> uvd vclk: 0 dclk: 0 >>> power level 0 sclk: 50000 vddc_index: 2 >>> power level 1 sclk: 50000 vddc_index: 2 >>> status: c r b >>> == power state 1 == >>> ui class: performance >>> internal class: none >>> caps: video >>> uvd vclk: 0 dclk: 0 >>> power level 0 sclk: 50000 vddc_index: 1 >>> power level 1 sclk: 70000 vddc_index: 2 >>> status: >>> == power state 2 == >>> ui class: none >>> internal class: uvd >>> caps: video >>> uvd vclk: 53300 dclk: 40000 >>> power level 0 sclk: 50000 vddc_index: 1 >>> power level 1 sclk: 50000 vddc_index: 1 >>> status: >>> switching from power state: >>> ui class: none >>> internal class: boot >>> caps: video >>> uvd vclk: 0 dclk: 0 >>> power level 0 sclk: 50000 vddc_index: 2 >>> power level 1 sclk: 50000 vddc_index: 2 >>> status: c b >>> switching to power state: >>> ui class: performance >>> internal class: none >>> caps: video >>> uvd vclk: 0 dclk: 0 >>> power level 0 sclk: 50000 vddc_index: 1 >>> power level 1 sclk: 70000 vddc_index: 2 >>> status: r >>> [drm] radeon: dpm initialized >>> [drm] fb mappable at 0xF0142000 >>> [drm] vram apper at 0xF0000000 >>> [drm] size 7299072 >>> [drm] fb depth is 24 >>> [drm] pitch is 6912 >>> fbcon: radeondrmfb (fb0) >>> >>> -- >>> Markus >> _______________________________________________ >> dri-devel mailing list >> dri-devel@xxxxxxxxxxxxxxxxxxxxx >> http://lists.freedesktop.org/mailman/listinfo/dri-devel > > This error message seems similar to mine "[drm:r600_uvd_ring_test] > *ERROR* radeon: ring 5 test failed (0xCAFEDEAD)" Bugzilla: > https://bugs.freedesktop.org/show_bug.cgi?id=67276 In my case I blame > another commit for this. Are these bugs related? I doubt it's related at all. You issue seems to be an initialization problem with UVD. Alex _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
