On my test machine Xorg doesn't start anymore when I kexec into a
3.11.0-rc3 kernel.
On cold boot everything is fine:
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 4082356 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880215c45c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880215c45c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 0 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
== power state 0 ==
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 70000 vddc_index: 2
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 53300 dclk: 40000
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 50000 vddc_index: 1
status:
switching from power state:
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c b
switching to power state:
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 70000 vddc_index: 2
status: r
[drm] radeon: dpm initialized
[drm] fb mappable at 0xF0142000
[drm] vram apper at 0xF0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
But after I run kexec things go wrong:
[drm] Initialized drm 1.1.0 20060810
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D).
[drm] register mmio base: 0xFBEE0000
[drm] register mmio size: 65536
ATOM BIOS: 113
radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=128M, BAR=128M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 4082356 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 128M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading RS780 Microcode
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880215c45c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880215c45c0c
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
radeon 0000:01:05.0: setting latency timer to 64
[drm] ring test on 0 succeeded in 0 usecs
[drm:r600_dma_ring_test] *ERROR* radeon: ring 3 test failed (0xCAFEDEAD)
radeon 0000:01:05.0: disabling GPU acceleration
radeon 0000:01:05.0: ffff8802161eb400 unpin not necessary
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] DVI-D-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
== power state 0 ==
ui class: none
internal class: boot
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 2
power level 1 sclk: 50000 vddc_index: 2
status: c r b
== power state 1 ==
ui class: performance
internal class: none
caps: video
uvd vclk: 0 dclk: 0
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 70000 vddc_index: 2
status:
== power state 2 ==
ui class: none
internal class: uvd
caps: video
uvd vclk: 53300 dclk: 40000
power level 0 sclk: 50000 vddc_index: 1
power level 1 sclk: 50000 vddc_index: 1
status:
[drm:radeon_pm_init_dpm] *ERROR* radeon: dpm initialization failed
[drm] fb mappable at 0xF0142000
[drm] vram apper at 0xF0000000
[drm] size 7299072
[drm] fb depth is 24
[drm] pitch is 6912
>From Xorg.0.log:
...
[ 5.217] (II) RADEON(0): VRAM usage limit set to 104864K
[ 5.218] (==) RADEON(0): Backing store disabled
[ 5.218] (WW) RADEON(0): Direct rendering disabled
[ 5.218] (II) RADEON(0): Acceleration disabled
[ 5.218] (==) RADEON(0): DPMS enabled
[ 5.218] (==) RADEON(0): Silken mouse enabled
[ 5.218] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5.219] (--) RandR disabled
[ 5.235] (II) AIGLX: Screen 0 is not DRI2 capable
[ 5.235] (II) AIGLX: Screen 0 is not DRI capable
[ 5.248] (II) AIGLX: Loaded and initialized swrast
[ 5.248] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 5.252] (EE) RADEON(0): Rotation requires acceleration!
[ 5.252] (EE)
Fatal server error:
[ 5.252] (EE) failed to create screen resources(EE)
[ 5.252] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5.252] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5.252] (EE)
[ 5.436] (EE) Server terminated with error (1). Closing log file.
I've bisected the issue to:
commit f5d9b7f0f93c6a7d40750b8b5528a1e0f0c678fb
Author: Alex Deucher <alexander.deucher@xxxxxxx>
Date: Thu Jul 25 21:46:21 2013 -0400
drm/radeon/dpm: fix r600_enable_sclk_control()
Actually program the correct register to enable
engine clock scaling control.
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Reverting this commit on top of rc3 "fixes" the problem for me.
--
Markus
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
