From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Add support for the Powkiddy RK2023. The Powkiddy RK2023 is a handheld
gaming device with a 3.5 inch screen powered by the Rockchip RK3566
SoC. The device is almost identical to the Anbernic RG353P except it
lacks eMMC, a function button, a touch screen, no UART headers on the
board, and the panel has slightly different timings.
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../dts/rockchip/rk3566-powkiddy-rk2023.dts | 161 ++++++++++++++++++
2 files changed, 162 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index a18f33bf0c0e..f969618da352 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rgb30.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-powkiddy-rk2023.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
new file mode 100644
index 000000000000..5740412f6b2b
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-powkiddy-rk2023.dts
@@ -0,0 +1,161 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rg353x.dtsi"
+
+/ {
+ model = "RK2023";
+ compatible = "powkiddy,rk2023", "rockchip,rk3566";
+
+ aliases {
+ mmc1 = &sdmmc0;
+ mmc2 = &sdmmc1;
+ mmc3 = &sdmmc2;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+ charge-full-design-microamp-hours = <3151000>;
+ charge-term-current-microamp = <300000>;
+ constant-charge-current-max-microamp = <2000000>;
+ constant-charge-voltage-max-microvolt = <4250000>;
+ factory-internal-resistance-micro-ohms = <117000>;
+ voltage-max-design-microvolt = <4172000>;
+ voltage-min-design-microvolt = <3400000>;
+
+ ocv-capacity-celsius = <20>;
+ ocv-capacity-table-0 = <4172000 100>, <4092000 95>, <4035000 90>, <3990000 85>,
+ <3939000 80>, <3895000 75>, <3852000 70>, <3807000 65>,
+ <3762000 60>, <3713000 55>, <3672000 50>, <3647000 45>,
+ <3629000 40>, <3613000 35>, <3598000 30>, <3578000 25>,
+ <3550000 20>, <3519000 15>, <3479000 10>, <3438000 5>,
+ <3400000 0>;
+ };
+
+ /* Channels reversed for headphones. */
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "rk817_int";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Headphone", "Headphones",
+ "Speaker", "Internal Speakers";
+ simple-audio-card,routing =
+ "MICL", "Mic Jack",
+ "Headphones", "HPOL",
+ "Headphones", "HPOR",
+ "Internal Speakers", "SPKO";
+
+ simple-audio-card,codec {
+ sound-dai = <&rk817>;
+ };
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s1_8ch>;
+ };
+ };
+
+};
+
+/delete-node/ &adc_keys;
+
+&chosen {
+ /delete-property/ stdout-path;
+};
+
+&cru {
+ assigned-clocks = <&pmucru CLK_RTC_32K>, <&cru PLL_GPLL>,
+ <&pmucru PLL_PPLL>, <&cru PLL_VPLL>;
+ assigned-clock-rates = <32768>, <1200000000>,
+ <200000000>, <115200000>;
+};
+
+&gpio_keys_control {
+ button-r1 {
+ gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+ label = "TR";
+ linux,code = <BTN_TR>;
+ };
+
+ button-r2 {
+ gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+ label = "TR2";
+ linux,code = <BTN_TR2>;
+ };
+};
+
+/delete-node/ &{/i2c@fdd40000/regulator@40};
+
+&i2c0 {
+ vdd_cpu: regulator@1c {
+ compatible = "tcs,tcs4525";
+ reg = <0x1c>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1390000>;
+ regulator-name = "vdd_cpu";
+ regulator-ramp-delay = <2300>;
+ vin-supply = <&vcc_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+/*
+ * Device has 2 controllable LEDs (a red and a green) along with a red
+ * LED that cannot be controlled and is always on when device is
+ * powered.
+ */
+
+/delete-node/ &{/pwm-leds/led-2};
+
+&leds {
+ green_led: led-0 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
+ max-brightness = <255>;
+ pwms = <&pwm6 0 25000 0>;
+ };
+
+ red_led: led-1 {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_CHARGING;
+ max-brightness = <255>;
+ pwms = <&pwm7 0 25000 0>;
+ };
+
+};
+
+&panel {
+ compatible = "powkiddy,rk2023-panel", "newvision,nv3051d";
+};
+
+&pwm5 {
+ status = "disabled";
+};
+
+&rk817 {
+ rk817_charger: charger {
+ monitored-battery = <&battery>;
+ rockchip,resistor-sense-micro-ohms = <10000>;
+ rockchip,sleep-enter-current-microamp = <300000>;
+ rockchip,sleep-filter-current-microamp = <100000>;
+ };
+};
+
+/* There is no UART header visible on the board for this device. */
+&uart2 {
+ status = "disabled";
+};
+
+/delete-node/ &vibrator;
--
2.34.1
