Hi Biju the series does not apply on v6.3. What is the base for the series ? On Thu, Nov 02, 2023 at 03:07:43PM +0000, Biju Das wrote: > The LCD controller is composed of Frame Compression Processor (FCPVD), > Video Signal Processor (VSPD), and Display Unit (DU). > > It has DPI/DSI interfaces and supports a maximum resolution of 1080p > along with 2 RPFs to support the blending of two picture layers and > raster operations (ROPs). > > The DU module is connected to VSPD. Add RZ/G2L DU support for RZ/G2L > alike SoCs. > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx> > --- > Ref: > https://lore.kernel.org/linux-renesas-soc/OS0PR01MB5922717E4CCFE07F3C25FBC986989@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/#t > v11->v12: > * Replaced rzg2l_du_write() with writel(). > v10->v11: > * Replaced CONFIG_DRM_RCAR_VSP->CONFIG_VIDEO_RENESAS_VSP1 for building > rzg2l_du_vsp driver. > * Dropped "rzg2l_du_regs.h" instead the relevant definitions defined in > .c file. > * Dropped setting ditr5 based on latest HW manual 1.3.0/1.4.0 > * Updated the comment for auto clear. > * Replaced writel()->rzg2l_du_write() in rzg2l_du_start_stop(). > * Dropped CRC related functions as it does not have DISCOM. > * Replaced the variable possible_crtcs->possible_outputs in > struct rzg2l_du_output_routing. > * Updated DMA_BIT_MASK from 40->32. > * Dropped unneeded struct drm_bridge from rzg2l_du_drv.h. > * Dropped colour keying support as it doesn't have planes. > * Added only RGB formats in rzg2l_du_format_infos. > * Dropped chroma planes from rzg2l_du_fb_create(). > * Updated the comment for max_pitch in rzg2l_du_fb_create(). > * Dropped possible_crtcs check in rzg2l_du_encoders_init(). > * Dropped additional empty line from struct rzg2l_du_device. > v9->v10: > * Dropped ARM64 dependency from Kconfig. > * Sorted the configs alphabetically in Kconfig. > * Dropped DRM_RCAR_VSP config option and make DRM_RZG2L_DU depend on > VIDEO_RENESAS_VSP1. > * On rzg2l_du_crtc_set_display_timing() replaced the setting of parent > clk rate with dclk rate. > * Added rzg2l_du_write() wrapper function. > * Updated the comment atomic_begin->atomic_flush. > * Dropped .atomic_check and .atomic_begin callback > * Renamed __rzg2l_du_crtc_plane_atomic_check->__rzg2l_du_vsp_plane_atomic > _check and moved it to rzg2l_du_vsp.c > * Added struct clk in rzg2l_du_crtc.h > * Dropped the variables mmio_offset,index,vblank_lock,vblank_wait, > vblank_count from struct rzg2l_du_crtc. > * Replaced the macro to_rzg2l_crtc with static inline functions. > * Dropped the unneeded header files clk.h, io.h, mm.h, pm.h, slab.h, > wait.h and drm_managed.h from rzg2l_du_drv.c. > * Replaced DRM_INFO->drm_info > * Dropped the callbacks prime_handle_to_fd, prime_fd_to_handle and > gem_prime_mmap. > * Replaced the callback remove->remove_new. > * Dropped header file wait.h and added forward declarations struct clk and > rzg2l_du_device from rzg2l_du_drv.h. > * Dropped the dsi and dpad0_source variables from struct rzg2l_du_device. > * Replaced the macro to_rzg2l_encoder with static inline functions. > * Dropped header files dma-buf.h and wait.h from rzg2l_du_kms.c. > * Dropped struct sg_table and added the scatterlist.h header file in > rzg2l_du_vsp.h > * Added container_of.h header file, forward declarations struct device and > struct rzg2l_du_device in rzg2l_du_vsp.h. > v8->v9: > * Dropped reset_control_assert() from error patch for rzg2l_du_crtc_get() as > suggested by Philipp Zabel. > v7->v8: > * Dropped RCar du lib and created RZ/G2L DU DRM driver by creating rz_du folder. > * Updated KConfig and Makefile. > v6->v7: > * Split DU lib and RZ/G2L du driver as separate patch series as > DU support added to more platforms based on RZ/G2L alike SoCs. > * Rebased to latest drm-tip. > * Added patch #2 for binding support for RZ/V2L DU > * Added patch #4 for driver support for RZ/V2L DU > * Added patch #5 for SoC DTSI support for RZ/G2L DU > * Added patch #6 for SoC DTSI support for RZ/V2L DU > * Added patch #7 for Enabling DU on SMARC EVK based on RZ/{G2L,V2L} SoCs. > * Added patch #8 for Enabling DU on SMARC EVK based on RZ/G2LC SoC. > --- > drivers/gpu/drm/renesas/Kconfig | 1 + > drivers/gpu/drm/renesas/Makefile | 1 + > drivers/gpu/drm/renesas/rz-du/Kconfig | 12 + > drivers/gpu/drm/renesas/rz-du/Makefile | 8 + > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c | 435 ++++++++++++++++ > drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h | 89 ++++ > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c | 176 +++++++ > drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h | 78 +++ > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.c | 72 +++ > .../gpu/drm/renesas/rz-du/rzg2l_du_encoder.h | 32 ++ > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c | 441 ++++++++++++++++ > drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h | 43 ++ > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c | 469 ++++++++++++++++++ > drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h | 97 ++++ > 14 files changed, 1954 insertions(+) > create mode 100644 drivers/gpu/drm/renesas/rz-du/Kconfig > create mode 100644 drivers/gpu/drm/renesas/rz-du/Makefile > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c > create mode 100644 drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h > > diff --git a/drivers/gpu/drm/renesas/Kconfig b/drivers/gpu/drm/renesas/Kconfig > index 3777dad17f81..21862a8ef710 100644 > --- a/drivers/gpu/drm/renesas/Kconfig > +++ b/drivers/gpu/drm/renesas/Kconfig > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0-only > > source "drivers/gpu/drm/renesas/rcar-du/Kconfig" > +source "drivers/gpu/drm/renesas/rz-du/Kconfig" > source "drivers/gpu/drm/renesas/shmobile/Kconfig" > diff --git a/drivers/gpu/drm/renesas/Makefile b/drivers/gpu/drm/renesas/Makefile > index ec0e89e7a592..b8d8bc53967f 100644 > --- a/drivers/gpu/drm/renesas/Makefile > +++ b/drivers/gpu/drm/renesas/Makefile > @@ -1,4 +1,5 @@ > # SPDX-License-Identifier: GPL-2.0 > > obj-y += rcar-du/ > +obj-y += rz-du/ > obj-$(CONFIG_DRM_SHMOBILE) += shmobile/ > diff --git a/drivers/gpu/drm/renesas/rz-du/Kconfig b/drivers/gpu/drm/renesas/rz-du/Kconfig > new file mode 100644 > index 000000000000..5f0db2c5fee6 > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/Kconfig > @@ -0,0 +1,12 @@ > +# SPDX-License-Identifier: GPL-2.0 > +config DRM_RZG2L_DU > + tristate "DRM Support for RZ/G2L Display Unit" > + depends on ARCH_RZG2L || COMPILE_TEST > + depends on DRM && OF > + depends on VIDEO_RENESAS_VSP1 > + select DRM_GEM_DMA_HELPER > + select DRM_KMS_HELPER > + select VIDEOMODE_HELPERS > + help > + Choose this option if you have an RZ/G2L alike chipset. > + If M is selected the module will be called rzg2l-du-drm. > diff --git a/drivers/gpu/drm/renesas/rz-du/Makefile b/drivers/gpu/drm/renesas/rz-du/Makefile > new file mode 100644 > index 000000000000..663b82a2577f > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/Makefile > @@ -0,0 +1,8 @@ > +# SPDX-License-Identifier: GPL-2.0 > +rzg2l-du-drm-y := rzg2l_du_crtc.o \ > + rzg2l_du_drv.o \ > + rzg2l_du_encoder.o \ > + rzg2l_du_kms.o \ > + > +rzg2l-du-drm-$(CONFIG_VIDEO_RENESAS_VSP1) += rzg2l_du_vsp.o > +obj-$(CONFIG_DRM_RZG2L_DU) += rzg2l-du-drm.o > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c > new file mode 100644 > index 000000000000..7656b2a6aebc > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.c > @@ -0,0 +1,435 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * RZ/G2L Display Unit CRTCs > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_crtc.c > + */ > + > +#include <linux/clk.h> > +#include <linux/mutex.h> > +#include <linux/platform_device.h> > +#include <linux/reset.h> > + > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_bridge.h> > +#include <drm/drm_crtc.h> > +#include <drm/drm_device.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_gem_dma_helper.h> > +#include <drm/drm_vblank.h> > + > +#include "rzg2l_du_crtc.h" > +#include "rzg2l_du_drv.h" > +#include "rzg2l_du_encoder.h" > +#include "rzg2l_du_kms.h" > +#include "rzg2l_du_vsp.h" > + > +#define DU_MCR0 0x00 > +#define DU_MCR0_DPI_OE BIT(0) This bit documented as reserved in TRM version Rev.1.30 (May 12th 2023) > +#define DU_MCR0_DI_EN BIT(8) > +#define DU_MCR0_PB_CLR BIT(16) > + > +#define DU_DITR0 0x10 > +#define DU_DITR0_DPI_CLKMD BIT(0) > +#define DU_DITR0_DEMD_LOW 0x0 > +#define DU_DITR0_DEMD_HIGH (BIT(8) | BIT(9)) > +#define DU_DITR0_VSPOL BIT(16) > +#define DU_DITR0_HSPOL BIT(17) > + > +#define DU_DITR1 0x14 > +#define DU_DITR1_VSA(x) ((x) << 0) > +#define DU_DITR1_VACTIVE(x) ((x) << 16) > + > +#define DU_DITR2 0x18 > +#define DU_DITR2_VBP(x) ((x) << 0) > +#define DU_DITR2_VFP(x) ((x) << 16) > + > +#define DU_DITR3 0x1c > +#define DU_DITR3_HSA(x) ((x) << 0) > +#define DU_DITR3_HACTIVE(x) ((x) << 16) > + > +#define DU_DITR4 0x20 > +#define DU_DITR4_HBP(x) ((x) << 0) > +#define DU_DITR4_HFP(x) ((x) << 16) > + > +#define DU_MCR1 0x40 > +#define DU_MCR1_PB_AUTOCLR BIT(16) > + > +#define DU_PBCR0 0x4c > +#define DU_PBCR0_PB_DEP(x) ((x) << 0) > + > +/* ----------------------------------------------------------------------------- > + * Hardware Setup > + */ > + > +static void rzg2l_du_crtc_set_display_timing(struct rzg2l_du_crtc *rcrtc) > +{ > + const struct drm_display_mode *mode = &rcrtc->crtc.state->adjusted_mode; > + unsigned long mode_clock = mode->clock * 1000; > + u32 ditr0, ditr1, ditr2, ditr3, ditr4, pbcr0; > + struct rzg2l_du_device *rcdu = rcrtc->dev; > + > + clk_prepare_enable(rcrtc->rzg2l_clocks.dclk); > + clk_set_rate(rcrtc->rzg2l_clocks.dclk, mode_clock); > + > + ditr0 = (DU_DITR0_DEMD_HIGH > + | ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? DU_DITR0_VSPOL : 0) > + | ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? DU_DITR0_HSPOL : 0)); > + > + ditr1 = DU_DITR1_VSA(mode->vsync_end - mode->vsync_start) > + | DU_DITR1_VACTIVE(mode->vdisplay); > + > + ditr2 = DU_DITR2_VBP(mode->vtotal - mode->vsync_end) > + | DU_DITR2_VFP(mode->vsync_start - mode->vdisplay); > + > + ditr3 = DU_DITR3_HSA(mode->hsync_end - mode->hsync_start) > + | DU_DITR3_HACTIVE(mode->hdisplay); > + > + ditr4 = DU_DITR4_HBP(mode->htotal - mode->hsync_end) > + | DU_DITR4_HFP(mode->hsync_start - mode->hdisplay); > + > + pbcr0 = DU_PBCR0_PB_DEP(0x1f); > + > + writel(ditr0, rcdu->mmio + DU_DITR0); > + writel(ditr1, rcdu->mmio + DU_DITR1); > + writel(ditr2, rcdu->mmio + DU_DITR2); > + writel(ditr3, rcdu->mmio + DU_DITR3); > + writel(ditr4, rcdu->mmio + DU_DITR4); > + writel(pbcr0, rcdu->mmio + DU_PBCR0); > + > + /* Enable auto clear */ > + writel(DU_MCR1_PB_AUTOCLR, rcdu->mmio + DU_MCR1); > +} > + > +/* ----------------------------------------------------------------------------- > + * Page Flip > + */ > + > +void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc) > +{ > + struct drm_pending_vblank_event *event; > + struct drm_device *dev = rcrtc->crtc.dev; > + unsigned long flags; > + > + spin_lock_irqsave(&dev->event_lock, flags); > + event = rcrtc->event; > + rcrtc->event = NULL; > + spin_unlock_irqrestore(&dev->event_lock, flags); > + > + if (!event) > + return; > + > + spin_lock_irqsave(&dev->event_lock, flags); > + drm_crtc_send_vblank_event(&rcrtc->crtc, event); > + wake_up(&rcrtc->flip_wait); > + spin_unlock_irqrestore(&dev->event_lock, flags); > + > + drm_crtc_vblank_put(&rcrtc->crtc); > +} > + > +static bool rzg2l_du_crtc_page_flip_pending(struct rzg2l_du_crtc *rcrtc) > +{ > + struct drm_device *dev = rcrtc->crtc.dev; > + unsigned long flags; > + bool pending; > + > + spin_lock_irqsave(&dev->event_lock, flags); > + pending = rcrtc->event; > + spin_unlock_irqrestore(&dev->event_lock, flags); > + > + return pending; > +} > + > +static void rzg2l_du_crtc_wait_page_flip(struct rzg2l_du_crtc *rcrtc) > +{ > + struct rzg2l_du_device *rcdu = rcrtc->dev; > + > + if (wait_event_timeout(rcrtc->flip_wait, > + !rzg2l_du_crtc_page_flip_pending(rcrtc), > + msecs_to_jiffies(50))) > + return; > + > + dev_warn(rcdu->dev, "page flip timeout\n"); > + > + rzg2l_du_crtc_finish_page_flip(rcrtc); > +} > + > +/* ----------------------------------------------------------------------------- > + * Start/Stop and Suspend/Resume > + */ > + > +static void rzg2l_du_crtc_setup(struct rzg2l_du_crtc *rcrtc) > +{ > + /* Configure display timings and output routing */ > + rzg2l_du_crtc_set_display_timing(rcrtc); > + > + /* Enable the VSP compositor. */ > + rzg2l_du_vsp_enable(rcrtc); > + > + /* Turn vertical blanking interrupt reporting on. */ > + drm_crtc_vblank_on(&rcrtc->crtc); > +} > + > +static int rzg2l_du_crtc_get(struct rzg2l_du_crtc *rcrtc) > +{ > + int ret; > + > + /* > + * Guard against double-get, as the function is called from both the > + * .atomic_enable() and .atomic_flush() handlers. > + */ > + if (rcrtc->initialized) > + return 0; > + > + ret = clk_prepare_enable(rcrtc->rzg2l_clocks.aclk); > + if (ret < 0) > + return ret; > + > + ret = clk_prepare_enable(rcrtc->rzg2l_clocks.pclk); > + if (ret < 0) > + goto error_bus_clock; > + > + ret = reset_control_deassert(rcrtc->rstc); > + if (ret < 0) > + goto error_peri_clock; > + > + rzg2l_du_crtc_setup(rcrtc); > + rcrtc->initialized = true; > + > + return 0; > + > +error_peri_clock: > + clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk); > +error_bus_clock: > + clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk); > + return ret; > +} > + > +static void rzg2l_du_crtc_put(struct rzg2l_du_crtc *rcrtc) > +{ > + clk_disable_unprepare(rcrtc->rzg2l_clocks.dclk); > + reset_control_assert(rcrtc->rstc); > + clk_disable_unprepare(rcrtc->rzg2l_clocks.pclk); > + clk_disable_unprepare(rcrtc->rzg2l_clocks.aclk); > + > + rcrtc->initialized = false; > +} > + > +static void rzg2l_du_start_stop(struct rzg2l_du_crtc *rcrtc, bool start) > +{ > + struct rzg2l_du_device *rcdu = rcrtc->dev; > + > + writel(start ? DU_MCR0_DI_EN : 0, rcdu->mmio + DU_MCR0); > +} > + > +static void rzg2l_du_crtc_start(struct rzg2l_du_crtc *rcrtc) > +{ > + rzg2l_du_start_stop(rcrtc, true); > +} > + > +static void rzg2l_du_crtc_stop(struct rzg2l_du_crtc *rcrtc) > +{ > + struct drm_crtc *crtc = &rcrtc->crtc; > + > + /* > + * Disable vertical blanking interrupt reporting. We first need to wait > + * for page flip completion before stopping the CRTC as userspace > + * expects page flips to eventually complete. > + */ > + rzg2l_du_crtc_wait_page_flip(rcrtc); > + drm_crtc_vblank_off(crtc); > + > + /* Disable the VSP compositor. */ > + rzg2l_du_vsp_disable(rcrtc); > + > + rzg2l_du_start_stop(rcrtc, false); > +} > + > +/* ----------------------------------------------------------------------------- > + * CRTC Functions > + */ > + > +static void rzg2l_du_crtc_atomic_enable(struct drm_crtc *crtc, > + struct drm_atomic_state *state) > +{ > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc); > + > + rzg2l_du_crtc_get(rcrtc); > + > + rzg2l_du_crtc_start(rcrtc); > +} > + > +static void rzg2l_du_crtc_atomic_disable(struct drm_crtc *crtc, > + struct drm_atomic_state *state) > +{ > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc); > + > + rzg2l_du_crtc_stop(rcrtc); > + rzg2l_du_crtc_put(rcrtc); > + > + spin_lock_irq(&crtc->dev->event_lock); > + if (crtc->state->event) { > + drm_crtc_send_vblank_event(crtc, crtc->state->event); > + crtc->state->event = NULL; > + } > + spin_unlock_irq(&crtc->dev->event_lock); > +} > + > +static void rzg2l_du_crtc_atomic_flush(struct drm_crtc *crtc, > + struct drm_atomic_state *state) > +{ > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc); > + struct drm_device *dev = rcrtc->crtc.dev; > + unsigned long flags; > + > + WARN_ON(!crtc->state->enable); > + > + /* > + * If a mode set is in progress we can be called with the CRTC disabled. > + * We thus need to first get and setup the CRTC in order to configure > + * planes. We must *not* put the CRTC, as it must be kept awake until > + * the .atomic_enable() call that will follow. The get operation in > + * .atomic_enable() will in that case be a no-op, and the CRTC will be > + * put later in .atomic_disable(). > + */ > + rzg2l_du_crtc_get(rcrtc); > + > + if (crtc->state->event) { > + WARN_ON(drm_crtc_vblank_get(crtc) != 0); > + > + spin_lock_irqsave(&dev->event_lock, flags); > + rcrtc->event = crtc->state->event; > + crtc->state->event = NULL; > + spin_unlock_irqrestore(&dev->event_lock, flags); > + } > + > + rzg2l_du_vsp_atomic_flush(rcrtc); > +} > + > +static const struct drm_crtc_helper_funcs crtc_helper_funcs = { > + .atomic_flush = rzg2l_du_crtc_atomic_flush, > + .atomic_enable = rzg2l_du_crtc_atomic_enable, > + .atomic_disable = rzg2l_du_crtc_atomic_disable, > +}; > + > +static struct drm_crtc_state * > +rzg2l_du_crtc_atomic_duplicate_state(struct drm_crtc *crtc) > +{ > + struct rzg2l_du_crtc_state *state; > + struct rzg2l_du_crtc_state *copy; > + > + if (WARN_ON(!crtc->state)) > + return NULL; > + > + state = to_rzg2l_crtc_state(crtc->state); > + copy = kmemdup(state, sizeof(*state), GFP_KERNEL); > + if (!copy) > + return NULL; > + > + __drm_atomic_helper_crtc_duplicate_state(crtc, ©->state); > + > + return ©->state; > +} > + > +static void rzg2l_du_crtc_atomic_destroy_state(struct drm_crtc *crtc, > + struct drm_crtc_state *state) > +{ > + __drm_atomic_helper_crtc_destroy_state(state); > + kfree(to_rzg2l_crtc_state(state)); > +} > + > +static void rzg2l_du_crtc_reset(struct drm_crtc *crtc) > +{ > + struct rzg2l_du_crtc_state *state; > + > + if (crtc->state) { > + rzg2l_du_crtc_atomic_destroy_state(crtc, crtc->state); > + crtc->state = NULL; > + } > + > + state = kzalloc(sizeof(*state), GFP_KERNEL); > + if (!state) > + return; > + > + __drm_atomic_helper_crtc_reset(crtc, &state->state); > +} > + > +static int rzg2l_du_crtc_enable_vblank(struct drm_crtc *crtc) > +{ > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc); > + > + rcrtc->vblank_enable = true; > + > + return 0; > +} > + > +static void rzg2l_du_crtc_disable_vblank(struct drm_crtc *crtc) > +{ > + struct rzg2l_du_crtc *rcrtc = to_rzg2l_crtc(crtc); > + > + rcrtc->vblank_enable = false; > +} > + > +static const struct drm_crtc_funcs crtc_funcs_rz = { > + .reset = rzg2l_du_crtc_reset, > + .destroy = drm_crtc_cleanup, > + .set_config = drm_atomic_helper_set_config, > + .page_flip = drm_atomic_helper_page_flip, > + .atomic_duplicate_state = rzg2l_du_crtc_atomic_duplicate_state, > + .atomic_destroy_state = rzg2l_du_crtc_atomic_destroy_state, > + .enable_vblank = rzg2l_du_crtc_enable_vblank, > + .disable_vblank = rzg2l_du_crtc_disable_vblank, > +}; > + > +/* ----------------------------------------------------------------------------- > + * Initialization > + */ > + > +int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu) > +{ > + struct rzg2l_du_crtc *rcrtc = &rcdu->crtcs[0]; > + struct drm_crtc *crtc = &rcrtc->crtc; > + struct drm_plane *primary; > + int ret; > + > + rcrtc->rstc = devm_reset_control_get_shared(rcdu->dev, NULL); > + if (IS_ERR(rcrtc->rstc)) { > + dev_err(rcdu->dev, "can't get cpg reset\n"); > + return PTR_ERR(rcrtc->rstc); > + } > + > + rcrtc->rzg2l_clocks.aclk = devm_clk_get(rcdu->dev, "aclk"); > + if (IS_ERR(rcrtc->rzg2l_clocks.aclk)) { > + dev_err(rcdu->dev, "no axi clock for DU\n"); > + return PTR_ERR(rcrtc->rzg2l_clocks.aclk); > + } > + > + rcrtc->rzg2l_clocks.pclk = devm_clk_get(rcdu->dev, "pclk"); > + if (IS_ERR(rcrtc->rzg2l_clocks.pclk)) { > + dev_err(rcdu->dev, "no peripheral clock for DU\n"); > + return PTR_ERR(rcrtc->rzg2l_clocks.pclk); > + } > + > + rcrtc->rzg2l_clocks.dclk = devm_clk_get(rcdu->dev, "vclk"); > + if (IS_ERR(rcrtc->rzg2l_clocks.dclk)) { > + dev_err(rcdu->dev, "no video clock for DU\n"); > + return PTR_ERR(rcrtc->rzg2l_clocks.dclk); > + } > + > + init_waitqueue_head(&rcrtc->flip_wait); > + rcrtc->dev = rcdu; > + > + primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane; > + > + ret = drm_crtc_init_with_planes(&rcdu->ddev, crtc, primary, NULL, > + &crtc_funcs_rz, NULL); > + if (ret < 0) > + return ret; > + > + drm_crtc_helper_add(crtc, &crtc_helper_funcs); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h > new file mode 100644 > index 000000000000..cbba38acc377 > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_crtc.h > @@ -0,0 +1,89 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * RZ/G2L Display Unit CRTCs > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_crtc.h > + */ > + > +#ifndef __RZG2L_DU_CRTC_H__ > +#define __RZG2L_DU_CRTC_H__ > + > +#include <linux/container_of.h> > +#include <linux/mutex.h> > +#include <linux/spinlock.h> > +#include <linux/wait.h> > + > +#include <drm/drm_crtc.h> > +#include <drm/drm_writeback.h> > + > +#include <media/vsp1.h> > + > +struct clk; > +struct reset_control; > +struct rzg2l_du_vsp; > +struct rzg2l_du_format_info; > + > +/** > + * struct rzg2l_du_crtc - the CRTC, representing a DU superposition processor > + * @crtc: base DRM CRTC > + * @dev: the DU device > + * @initialized: whether the CRTC has been initialized and clocks enabled > + * @vblank_enable: whether vblank events are enabled on this CRTC > + * @event: event to post when the pending page flip completes > + * @flip_wait: wait queue used to signal page flip completion > + * @vsp: VSP feeding video to this CRTC > + * @vsp_pipe: index of the VSP pipeline feeding video to this CRTC > + * @rstc: reset controller > + * @rzg2l_clocks: the bus, main and video clock > + */ > +struct rzg2l_du_crtc { > + struct drm_crtc crtc; > + > + struct rzg2l_du_device *dev; > + bool initialized; > + > + bool vblank_enable; > + struct drm_pending_vblank_event *event; > + wait_queue_head_t flip_wait; > + > + struct rzg2l_du_vsp *vsp; > + unsigned int vsp_pipe; > + > + const char *const *sources; > + unsigned int sources_count; > + > + struct reset_control *rstc; > + struct { > + struct clk *aclk; > + struct clk *pclk; > + struct clk *dclk; > + } rzg2l_clocks; > +}; > + > +static inline struct rzg2l_du_crtc *to_rzg2l_crtc(struct drm_crtc *c) > +{ > + return container_of(c, struct rzg2l_du_crtc, crtc); > +} > + > +/** > + * struct rzg2l_du_crtc_state - Driver-specific CRTC state > + * @state: base DRM CRTC state > + * @outputs: bitmask of the outputs (enum rzg2l_du_output) driven by this CRTC > + */ > +struct rzg2l_du_crtc_state { > + struct drm_crtc_state state; > + unsigned int outputs; > +}; > + > +static inline struct rzg2l_du_crtc_state *to_rzg2l_crtc_state(struct drm_crtc_state *s) > +{ > + return container_of(s, struct rzg2l_du_crtc_state, state); > +} > + > +int rzg2l_du_crtc_create(struct rzg2l_du_device *rcdu); > + > +void rzg2l_du_crtc_finish_page_flip(struct rzg2l_du_crtc *rcrtc); > + > +#endif /* __RZG2L_DU_CRTC_H__ */ > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c > new file mode 100644 > index 000000000000..2f3ced999c4f > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.c > @@ -0,0 +1,176 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * RZ/G2L Display Unit DRM driver > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_drv.c > + */ > + > +#include <linux/dma-mapping.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/platform_device.h> > + > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_drv.h> > +#include <drm/drm_fbdev_generic.h> > +#include <drm/drm_gem_dma_helper.h> > +#include <drm/drm_probe_helper.h> > + > +#include "rzg2l_du_drv.h" > +#include "rzg2l_du_kms.h" > + > +/* ----------------------------------------------------------------------------- > + * Device Information > + */ > + > +static const struct rzg2l_du_device_info rzg2l_du_r9a07g044_info = { > + .channels_mask = BIT(0), > + .routes = { > + [RZG2L_DU_OUTPUT_DSI0] = { > + .possible_outputs = BIT(0), > + .port = 0, > + }, > + [RZG2L_DU_OUTPUT_DPAD0] = { > + .possible_outputs = BIT(0), > + .port = 1, > + } > + } > +}; > + > +static const struct of_device_id rzg2l_du_of_table[] = { > + { .compatible = "renesas,r9a07g044-du", .data = &rzg2l_du_r9a07g044_info }, > + { /* sentinel */ } > +}; > + > +MODULE_DEVICE_TABLE(of, rzg2l_du_of_table); > + > +const char *rzg2l_du_output_name(enum rzg2l_du_output output) > +{ > + static const char * const names[] = { > + [RZG2L_DU_OUTPUT_DSI0] = "DSI0", > + [RZG2L_DU_OUTPUT_DPAD0] = "DPAD0" > + }; > + > + if (output >= ARRAY_SIZE(names)) > + return "UNKNOWN"; > + > + return names[output]; > +} > + > +/* ----------------------------------------------------------------------------- > + * DRM operations > + */ > + > +DEFINE_DRM_GEM_DMA_FOPS(rzg2l_du_fops); > + > +static const struct drm_driver rzg2l_du_driver = { > + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, > + .dumb_create = rzg2l_du_dumb_create, > + .gem_prime_import_sg_table = rzg2l_du_gem_prime_import_sg_table, > + .fops = &rzg2l_du_fops, > + .name = "rzg2l-du", > + .desc = "Renesas RZ/G2L Display Unit", > + .date = "20230410", > + .major = 1, > + .minor = 0, > +}; > + > +/* ----------------------------------------------------------------------------- > + * Platform driver > + */ > + > +static void rzg2l_du_remove(struct platform_device *pdev) > +{ > + struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev); > + struct drm_device *ddev = &rcdu->ddev; > + > + drm_dev_unregister(ddev); > + drm_atomic_helper_shutdown(ddev); > + > + drm_kms_helper_poll_fini(ddev); > +} > + > +static void rzg2l_du_shutdown(struct platform_device *pdev) > +{ > + struct rzg2l_du_device *rcdu = platform_get_drvdata(pdev); > + > + drm_atomic_helper_shutdown(&rcdu->ddev); > +} > + > +static int rzg2l_du_probe(struct platform_device *pdev) > +{ > + struct rzg2l_du_device *rcdu; > + int ret; > + > + if (drm_firmware_drivers_only()) > + return -ENODEV; > + > + /* Allocate and initialize the RZ/G2L device structure. */ > + rcdu = devm_drm_dev_alloc(&pdev->dev, &rzg2l_du_driver, > + struct rzg2l_du_device, ddev); > + if (IS_ERR(rcdu)) > + return PTR_ERR(rcdu); > + > + rcdu->dev = &pdev->dev; > + rcdu->info = of_device_get_match_data(rcdu->dev); > + > + platform_set_drvdata(pdev, rcdu); > + > + /* I/O resources */ > + rcdu->mmio = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(rcdu->mmio)) > + return PTR_ERR(rcdu->mmio); > + > + ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); > + if (ret) > + return ret; > + > + /* DRM/KMS objects */ > + ret = rzg2l_du_modeset_init(rcdu); > + if (ret < 0) { > + /* > + * Don't use dev_err_probe(), as it would overwrite the probe > + * deferral reason recorded in rzg2l_du_modeset_init(). Not sure I got this one. It's been verbatim copied from rcar-du, just wanted to make sure it applies here too > + */ > + if (ret != -EPROBE_DEFER) > + dev_err(&pdev->dev, > + "failed to initialize DRM/KMS (%d)\n", ret); > + goto error; > + } > + > + /* > + * Register the DRM device with the core and the connectors with > + * sysfs. > + */ > + ret = drm_dev_register(&rcdu->ddev, 0); > + if (ret) > + goto error; > + > + drm_info(&rcdu->ddev, "Device %s probed\n", dev_name(&pdev->dev)); > + > + drm_fbdev_generic_setup(&rcdu->ddev, 32); > + > + return 0; > + > +error: > + drm_kms_helper_poll_fini(&rcdu->ddev); > + return ret; > +} > + > +static struct platform_driver rzg2l_du_platform_driver = { > + .probe = rzg2l_du_probe, > + .remove_new = rzg2l_du_remove, > + .shutdown = rzg2l_du_shutdown, > + .driver = { > + .name = "rzg2l-du", > + .of_match_table = rzg2l_du_of_table, > + }, > +}; > + > +module_platform_driver(rzg2l_du_platform_driver); > + > +MODULE_AUTHOR("Biju Das <biju.das.jz@xxxxxxxxxxxxxx>"); > +MODULE_DESCRIPTION("Renesas RZ/G2L Display Unit DRM Driver"); > +MODULE_LICENSE("GPL"); > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h > new file mode 100644 > index 000000000000..58806c2a8f2b > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_drv.h > @@ -0,0 +1,78 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * RZ/G2L Display Unit DRM driver > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_drv.h > + */ > + > +#ifndef __RZG2L_DU_DRV_H__ > +#define __RZG2L_DU_DRV_H__ > + > +#include <linux/kernel.h> > + > +#include <drm/drm_device.h> > + > +#include "rzg2l_du_crtc.h" > +#include "rzg2l_du_vsp.h" > + > +struct device; > +struct drm_property; > + > +enum rzg2l_du_output { > + RZG2L_DU_OUTPUT_DSI0, > + RZG2L_DU_OUTPUT_DPAD0, > + RZG2L_DU_OUTPUT_MAX, > +}; > + > +/* > + * struct rzg2l_du_output_routing - Output routing specification > + * @possible_outputs: bitmask of possible outputs > + * @port: device tree port number corresponding to this output route > + * > + * The DU has 2 possible outputs (DPAD0, DSI0). Output routing data > + * specify the valid SoC outputs, which CRTC can drive the output, and the type > + * of in-SoC encoder for the output. > + */ > +struct rzg2l_du_output_routing { > + unsigned int possible_outputs; > + unsigned int port; > +}; > + > +/* > + * struct rzg2l_du_device_info - DU model-specific information > + * @channels_mask: bit mask of available DU channels > + * @routes: array of CRTC to output routes, indexed by output (RZG2L_DU_OUTPUT_*) > + */ > +struct rzg2l_du_device_info { > + unsigned int channels_mask; > + struct rzg2l_du_output_routing routes[RZG2L_DU_OUTPUT_MAX]; > +}; > + > +#define RZG2L_DU_MAX_CRTCS 1 > +#define RZG2L_DU_MAX_VSPS 1 > +#define RZG2L_DU_MAX_DSI 1 > + > +struct rzg2l_du_device { > + struct device *dev; > + const struct rzg2l_du_device_info *info; > + > + void __iomem *mmio; > + > + struct drm_device ddev; > + > + struct rzg2l_du_crtc crtcs[RZG2L_DU_MAX_CRTCS]; > + unsigned int num_crtcs; > + > + struct rzg2l_du_vsp vsps[RZG2L_DU_MAX_VSPS]; > +}; > + > +static inline struct rzg2l_du_device *to_rzg2l_du_device(struct drm_device *dev) > +{ > + return container_of(dev, struct rzg2l_du_device, ddev); > +} > + > +const char *rzg2l_du_output_name(enum rzg2l_du_output output); > + > +#endif /* __RZG2L_DU_DRV_H__ */ > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c > new file mode 100644 > index 000000000000..339cbaaea0b5 > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.c > @@ -0,0 +1,72 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * RZ/G2L Display Unit Encoder > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_encoder.c > + */ > + > +#include <linux/export.h> > +#include <linux/of.h> > + > +#include <drm/drm_bridge.h> > +#include <drm/drm_bridge_connector.h> > +#include <drm/drm_panel.h> > + > +#include "rzg2l_du_drv.h" > +#include "rzg2l_du_encoder.h" > + > +/* ----------------------------------------------------------------------------- > + * Encoder > + */ > + > +static const struct drm_encoder_funcs rzg2l_du_encoder_funcs = { > +}; > + > +int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu, > + enum rzg2l_du_output output, > + struct device_node *enc_node) > +{ > + struct rzg2l_du_encoder *renc; > + struct drm_connector *connector; > + struct drm_bridge *bridge; > + int ret; > + > + /* Locate the DRM bridge from the DT node. */ > + bridge = of_drm_find_bridge(enc_node); > + if (!bridge) > + return -EPROBE_DEFER; > + > + dev_dbg(rcdu->dev, "initializing encoder %pOF for output %s\n", > + enc_node, rzg2l_du_output_name(output)); > + > + renc = drmm_encoder_alloc(&rcdu->ddev, struct rzg2l_du_encoder, base, > + &rzg2l_du_encoder_funcs, DRM_MODE_ENCODER_NONE, > + NULL); > + if (IS_ERR(renc)) > + return PTR_ERR(renc); > + > + renc->output = output; > + > + /* Attach the bridge to the encoder. */ > + ret = drm_bridge_attach(&renc->base, bridge, NULL, > + DRM_BRIDGE_ATTACH_NO_CONNECTOR); > + if (ret) { > + dev_err(rcdu->dev, > + "failed to attach bridge %pOF for output %s (%d)\n", > + bridge->of_node, rzg2l_du_output_name(output), ret); > + return ret; > + } > + > + /* Create the connector for the chain of bridges. */ > + connector = drm_bridge_connector_init(&rcdu->ddev, &renc->base); > + if (IS_ERR(connector)) { > + dev_err(rcdu->dev, > + "failed to created connector for output %s (%ld)\n", > + rzg2l_du_output_name(output), PTR_ERR(connector)); > + return PTR_ERR(connector); > + } > + > + return drm_connector_attach_encoder(connector, &renc->base); > +} > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h > new file mode 100644 > index 000000000000..3e430c1f6132 > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_encoder.h > @@ -0,0 +1,32 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * RZ/G2L Display Unit Encoder > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_encoder.h > + */ > + > +#ifndef __RZG2L_DU_ENCODER_H__ > +#define __RZG2L_DU_ENCODER_H__ > + > +#include <drm/drm_encoder.h> > +#include <linux/container_of.h> > + > +struct rzg2l_du_device; > + > +struct rzg2l_du_encoder { > + struct drm_encoder base; > + enum rzg2l_du_output output; > +}; > + > +static inline struct rzg2l_du_encoder *to_rzg2l_encoder(struct drm_encoder *e) > +{ > + return container_of(e, struct rzg2l_du_encoder, base); > +} > + > +int rzg2l_du_encoder_init(struct rzg2l_du_device *rcdu, > + enum rzg2l_du_output output, > + struct device_node *enc_node); > + > +#endif /* __RZG2L_DU_ENCODER_H__ */ > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c > new file mode 100644 > index 000000000000..9e4fa36d1dd0 > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.c > @@ -0,0 +1,441 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * RZ/G2L Display Unit Mode Setting > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_kms.c > + */ > + > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_crtc.h> > +#include <drm/drm_device.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_gem_dma_helper.h> > +#include <drm/drm_gem_framebuffer_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_probe_helper.h> > +#include <drm/drm_vblank.h> > + > +#include <linux/device.h> > +#include <linux/of.h> > +#include <linux/of_graph.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > + > +#include "rzg2l_du_crtc.h" > +#include "rzg2l_du_drv.h" > +#include "rzg2l_du_encoder.h" > +#include "rzg2l_du_kms.h" > +#include "rzg2l_du_vsp.h" > + > +/* ----------------------------------------------------------------------------- > + * Format helpers > + */ > + > +static const struct rzg2l_du_format_info rzg2l_du_format_infos[] = { > + { > + .fourcc = DRM_FORMAT_XRGB8888, > + .v4l2 = V4L2_PIX_FMT_XBGR32, > + .bpp = 32, > + .planes = 1, > + .hsub = 1, > + }, { > + .fourcc = DRM_FORMAT_ARGB8888, > + .v4l2 = V4L2_PIX_FMT_ABGR32, > + .bpp = 32, > + .planes = 1, > + .hsub = 1, > + }, { > + .fourcc = DRM_FORMAT_RGB888, > + .v4l2 = V4L2_PIX_FMT_BGR24, > + .bpp = 24, > + .planes = 1, > + .hsub = 1, > + } > +}; > + > +const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(rzg2l_du_format_infos); ++i) { > + if (rzg2l_du_format_infos[i].fourcc == fourcc) > + return &rzg2l_du_format_infos[i]; > + } > + > + return NULL; > +} > + > +/* ----------------------------------------------------------------------------- > + * Frame buffer > + */ > + > +static const struct drm_gem_object_funcs rzg2l_du_gem_funcs = { > + .free = drm_gem_dma_object_free, > + .print_info = drm_gem_dma_object_print_info, > + .get_sg_table = drm_gem_dma_object_get_sg_table, > + .vmap = drm_gem_dma_object_vmap, > + .mmap = drm_gem_dma_object_mmap, > + .vm_ops = &drm_gem_dma_vm_ops, > +}; > + > +struct drm_gem_object * > +rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev, > + struct dma_buf_attachment *attach, > + struct sg_table *sgt) > +{ > + struct drm_gem_dma_object *dma_obj; > + struct drm_gem_object *gem_obj; > + int ret; > + > + /* Create a DMA GEM buffer. */ > + dma_obj = kzalloc(sizeof(*dma_obj), GFP_KERNEL); > + if (!dma_obj) > + return ERR_PTR(-ENOMEM); > + > + gem_obj = &dma_obj->base; > + gem_obj->funcs = &rzg2l_du_gem_funcs; > + > + drm_gem_private_object_init(dev, gem_obj, attach->dmabuf->size); > + dma_obj->map_noncoherent = false; > + > + ret = drm_gem_create_mmap_offset(gem_obj); > + if (ret) { > + drm_gem_object_release(gem_obj); > + kfree(dma_obj); > + return ERR_PTR(ret); > + } > + > + dma_obj->dma_addr = 0; > + dma_obj->sgt = sgt; > + > + return gem_obj; > +} > + > +int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args) > +{ > + unsigned int min_pitch = DIV_ROUND_UP(args->width * args->bpp, 8); > + unsigned int align = 16 * args->bpp / 8; > + > + args->pitch = roundup(min_pitch, align); > + > + return drm_gem_dma_dumb_create_internal(file, dev, args); > +} > + > +static struct drm_framebuffer * > +rzg2l_du_fb_create(struct drm_device *dev, struct drm_file *file_priv, > + const struct drm_mode_fb_cmd2 *mode_cmd) > +{ > + const struct rzg2l_du_format_info *format; > + unsigned int max_pitch; > + > + format = rzg2l_du_format_info(mode_cmd->pixel_format); > + if (!format) { > + dev_dbg(dev->dev, "unsupported pixel format %p4cc\n", > + &mode_cmd->pixel_format); > + return ERR_PTR(-EINVAL); > + } > + > + /* > + * On RZ/G2L the memory interface is handled by the VSP that limits the > + * pitch to 65535 bytes. > + */ > + max_pitch = 65535; > + if (mode_cmd->pitches[0] > max_pitch) { > + dev_dbg(dev->dev, "invalid pitch value %u\n", > + mode_cmd->pitches[0]); > + return ERR_PTR(-EINVAL); > + } > + > + return drm_gem_fb_create(dev, file_priv, mode_cmd); > +} > + > +/* ----------------------------------------------------------------------------- > + * Atomic Check and Update > + */ > + > +static void rzg2l_du_atomic_commit_tail(struct drm_atomic_state *old_state) > +{ > + struct drm_device *dev = old_state->dev; > + > + /* Apply the atomic update. */ > + drm_atomic_helper_commit_modeset_disables(dev, old_state); > + drm_atomic_helper_commit_planes(dev, old_state, > + DRM_PLANE_COMMIT_ACTIVE_ONLY); > + drm_atomic_helper_commit_modeset_enables(dev, old_state); > + > + drm_atomic_helper_commit_hw_done(old_state); > + drm_atomic_helper_wait_for_flip_done(dev, old_state); > + > + drm_atomic_helper_cleanup_planes(dev, old_state); > +} > + > +/* ----------------------------------------------------------------------------- > + * Initialization > + */ > + > +static const struct drm_mode_config_helper_funcs rzg2l_du_mode_config_helper = { > + .atomic_commit_tail = rzg2l_du_atomic_commit_tail, > +}; > + > +static const struct drm_mode_config_funcs rzg2l_du_mode_config_funcs = { > + .fb_create = rzg2l_du_fb_create, > + .atomic_check = drm_atomic_helper_check, > + .atomic_commit = drm_atomic_helper_commit, > +}; > + > +static int rzg2l_du_encoders_init_one(struct rzg2l_du_device *rcdu, > + enum rzg2l_du_output output, > + struct of_endpoint *ep) > +{ > + struct device_node *entity; > + int ret; > + > + /* Locate the connected entity and initialize the encoder. */ > + entity = of_graph_get_remote_port_parent(ep->local_node); > + if (!entity) { > + dev_dbg(rcdu->dev, "unconnected endpoint %pOF, skipping\n", > + ep->local_node); > + return -ENODEV; > + } > + > + if (!of_device_is_available(entity)) { > + dev_dbg(rcdu->dev, > + "connected entity %pOF is disabled, skipping\n", > + entity); > + of_node_put(entity); > + return -ENODEV; > + } > + > + ret = rzg2l_du_encoder_init(rcdu, output, entity); > + if (ret && ret != -EPROBE_DEFER && ret != -ENOLINK) > + dev_warn(rcdu->dev, > + "failed to initialize encoder %pOF on output %s (%d), skipping\n", > + entity, rzg2l_du_output_name(output), ret); > + > + of_node_put(entity); > + > + return ret; > +} > + > +static int rzg2l_du_encoders_init(struct rzg2l_du_device *rcdu) > +{ > + struct device_node *np = rcdu->dev->of_node; > + struct device_node *ep_node; > + unsigned int num_encoders = 0; > + > + /* > + * Iterate over the endpoints and create one encoder for each output > + * pipeline. > + */ > + for_each_endpoint_of_node(np, ep_node) { > + enum rzg2l_du_output output; > + struct of_endpoint ep; > + unsigned int i; > + int ret; > + > + ret = of_graph_parse_endpoint(ep_node, &ep); > + if (ret < 0) { > + of_node_put(ep_node); > + return ret; > + } > + > + /* Find the output route corresponding to the port number. */ > + for (i = 0; i < RZG2L_DU_OUTPUT_MAX; ++i) { > + if (rcdu->info->routes[i].port == ep.port) { > + output = i; > + break; > + } > + } > + > + if (i == RZG2L_DU_OUTPUT_MAX) { > + dev_warn(rcdu->dev, > + "port %u references unexisting output, skipping\n", > + ep.port); > + continue; > + } > + > + /* Process the output pipeline. */ > + ret = rzg2l_du_encoders_init_one(rcdu, output, &ep); > + if (ret < 0) { > + if (ret == -EPROBE_DEFER) { > + of_node_put(ep_node); > + return ret; > + } > + > + continue; > + } > + > + num_encoders++; > + } > + > + return num_encoders; > +} > + > +static int rzg2l_du_vsps_init(struct rzg2l_du_device *rcdu) > +{ > + const struct device_node *np = rcdu->dev->of_node; > + const char *vsps_prop_name = "renesas,vsps"; > + struct of_phandle_args args; > + struct { > + struct device_node *np; > + unsigned int crtcs_mask; > + } vsps[RZG2L_DU_MAX_VSPS] = { { NULL, }, }; > + unsigned int vsps_count = 0; > + unsigned int cells; > + unsigned int i; > + int ret; > + > + /* > + * First parse the DT vsps property to populate the list of VSPs. Each > + * entry contains a pointer to the VSP DT node and a bitmask of the > + * connected DU CRTCs. > + */ > + ret = of_property_count_u32_elems(np, vsps_prop_name); > + if (ret < 0) { > + /* Backward compatibility with old DTBs. */ > + vsps_prop_name = "vsps"; > + ret = of_property_count_u32_elems(np, vsps_prop_name); Do you need this one ? You don't have "old DTBs" if I'm not mistaken > + } > + cells = ret / rcdu->num_crtcs - 1; > + if (cells > 1) You have 2 elements for each vsp entry (phandle + LIF), and one vsps can be associated with one CRTC only, right ? Doesn't the above work onl if you have a single CRTC (2 / 1 - 1 == 1) but breaks for any other larger number of CRTCs ? (ie with 3 CRTC 6 / 1 - 1 > 1) ? Also, can RZ/G2L have more than 1 CRTC ? Do you need all the below code ? > + return -EINVAL; > + > + for (i = 0; i < rcdu->num_crtcs; ++i) { > + unsigned int j; > + > + ret = of_parse_phandle_with_fixed_args(np, vsps_prop_name, > + cells, i, &args); > + if (ret < 0) > + goto error; > + > + /* > + * Add the VSP to the list or update the corresponding existing > + * entry if the VSP has already been added. > + */ > + for (j = 0; j < vsps_count; ++j) { > + if (vsps[j].np == args.np) > + break; > + } > + > + if (j < vsps_count) > + of_node_put(args.np); > + else > + vsps[vsps_count++].np = args.np; > + > + vsps[j].crtcs_mask |= BIT(i); > + > + /* > + * Store the VSP pointer and pipe index in the CRTC. If the > + * second cell of the 'renesas,vsps' specifier isn't present, > + * default to 0 to remain compatible with older DT bindings. > + */ > + rcdu->crtcs[i].vsp = &rcdu->vsps[j]; > + rcdu->crtcs[i].vsp_pipe = cells >= 1 ? args.args[0] : 0; > + } > + > + /* > + * Then initialize all the VSPs from the node pointers and CRTCs bitmask > + * computed previously. > + */ > + for (i = 0; i < vsps_count; ++i) { > + struct rzg2l_du_vsp *vsp = &rcdu->vsps[i]; > + > + vsp->index = i; > + vsp->dev = rcdu; > + > + ret = rzg2l_du_vsp_init(vsp, vsps[i].np, vsps[i].crtcs_mask); > + if (ret < 0) > + goto error; > + } > + > + return 0; > + > +error: > + for (i = 0; i < ARRAY_SIZE(vsps); ++i) > + of_node_put(vsps[i].np); > + > + return ret; > +} > + > +int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu) > +{ > + struct drm_device *dev = &rcdu->ddev; > + struct drm_encoder *encoder; > + unsigned int num_encoders; > + int ret; > + > + ret = drmm_mode_config_init(dev); > + if (ret) > + return ret; > + > + dev->mode_config.min_width = 0; > + dev->mode_config.min_height = 0; > + dev->mode_config.normalize_zpos = true; > + dev->mode_config.funcs = &rzg2l_du_mode_config_funcs; > + dev->mode_config.helper_private = &rzg2l_du_mode_config_helper; > + > + /* > + * The RZ DU uses the VSP1 for memory access, and is limited > + * to frame sizes of 1920x1080. > + */ > + dev->mode_config.max_width = 1920; > + dev->mode_config.max_height = 1080; > + > + rcdu->num_crtcs = hweight8(rcdu->info->channels_mask); > + > + /* > + * Initialize vertical blanking interrupts handling. Start with vblank > + * disabled for all CRTCs. > + */ > + ret = drm_vblank_init(dev, rcdu->num_crtcs); > + if (ret < 0) > + return ret; > + > + /* Initialize the compositors. */ > + ret = rzg2l_du_vsps_init(rcdu); > + if (ret < 0) > + return ret; > + > + /* Create the CRTCs. */ > + ret = rzg2l_du_crtc_create(rcdu); > + if (ret < 0) > + return ret; > + > + /* Initialize the encoders. */ > + ret = rzg2l_du_encoders_init(rcdu); > + if (ret < 0) { > + dev_err_probe(rcdu->dev, ret, "failed to initialize encoders\n"); > + return ret; > + } > + > + if (ret == 0) { > + dev_err(rcdu->dev, "error: no encoder could be initialized\n"); > + return -EINVAL; > + } > + > + num_encoders = ret; > + > + /* > + * Set the possible CRTCs and possible clones. There's always at least > + * one way for all encoders to clone each other, set all bits in the > + * possible clones field. > + */ > + list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) { > + struct rzg2l_du_encoder *renc = to_rzg2l_encoder(encoder); > + const struct rzg2l_du_output_routing *route = > + &rcdu->info->routes[renc->output]; > + > + encoder->possible_crtcs = route->possible_outputs; > + encoder->possible_clones = (1 << num_encoders) - 1; > + } > + > + drm_mode_config_reset(dev); > + > + drm_kms_helper_poll_init(dev); > + > + return 0; > +} > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h > new file mode 100644 > index 000000000000..876e97cfbf45 > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_kms.h > @@ -0,0 +1,43 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * RZ/G2L Display Unit Mode Setting > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_kms.h > + */ > + > +#ifndef __RZG2L_DU_KMS_H__ > +#define __RZG2L_DU_KMS_H__ > + > +#include <linux/types.h> > + > +struct dma_buf_attachment; > +struct drm_file; > +struct drm_device; > +struct drm_gem_object; > +struct drm_mode_create_dumb; > +struct rzg2l_du_device; > +struct sg_table; > + > +struct rzg2l_du_format_info { > + u32 fourcc; > + u32 v4l2; > + unsigned int bpp; > + unsigned int planes; > + unsigned int hsub; > +}; > + > +const struct rzg2l_du_format_info *rzg2l_du_format_info(u32 fourcc); > + > +int rzg2l_du_modeset_init(struct rzg2l_du_device *rcdu); > + > +int rzg2l_du_dumb_create(struct drm_file *file, struct drm_device *dev, > + struct drm_mode_create_dumb *args); > + > +struct drm_gem_object * > +rzg2l_du_gem_prime_import_sg_table(struct drm_device *dev, > + struct dma_buf_attachment *attach, > + struct sg_table *sgt); > + > +#endif /* __RZG2L_DU_KMS_H__ */ > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c > new file mode 100644 > index 000000000000..767636daa23c > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.c > @@ -0,0 +1,469 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* > + * RZ/G2L Display Unit VSP-Based Compositor > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_vsp.c > + */ > + > +#include <drm/drm_atomic.h> > +#include <drm/drm_atomic_helper.h> > +#include <drm/drm_blend.h> > +#include <drm/drm_crtc.h> > +#include <drm/drm_fb_dma_helper.h> > +#include <drm/drm_fourcc.h> > +#include <drm/drm_framebuffer.h> > +#include <drm/drm_gem_atomic_helper.h> > +#include <drm/drm_gem_dma_helper.h> > +#include <drm/drm_managed.h> > +#include <drm/drm_vblank.h> > + > +#include <linux/bitops.h> > +#include <linux/dma-mapping.h> > +#include <linux/of_platform.h> > +#include <linux/platform_device.h> > +#include <linux/scatterlist.h> > + > +#include <media/vsp1.h> > + > +#include "rzg2l_du_drv.h" > +#include "rzg2l_du_kms.h" > +#include "rzg2l_du_vsp.h" > + > +static void rzg2l_du_vsp_complete(void *private, unsigned int status, u32 crc) > +{ > + struct rzg2l_du_crtc *crtc = private; > + > + if (crtc->vblank_enable) > + drm_crtc_handle_vblank(&crtc->crtc); > + > + if (status & VSP1_DU_STATUS_COMPLETE) > + rzg2l_du_crtc_finish_page_flip(crtc); > + > + drm_crtc_add_crc_entry(&crtc->crtc, false, 0, &crc); > +} > + > +void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) > +{ > + const struct drm_display_mode *mode = &crtc->crtc.state->adjusted_mode; > + struct vsp1_du_lif_config cfg = { > + .width = mode->hdisplay, > + .height = mode->vdisplay, > + .interlaced = mode->flags & DRM_MODE_FLAG_INTERLACE, > + .callback = rzg2l_du_vsp_complete, > + .callback_data = crtc, > + }; > + > + vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, &cfg); > +} > + > +void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) > +{ > + vsp1_du_setup_lif(crtc->vsp->vsp, crtc->vsp_pipe, NULL); > +} > + > +void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc) > +{ > + vsp1_du_atomic_begin(crtc->vsp->vsp, crtc->vsp_pipe); > +} > + > +void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) > +{ > + struct vsp1_du_atomic_pipe_config cfg = { { 0, } }; > + struct rzg2l_du_crtc_state *state; > + > + state = to_rzg2l_crtc_state(crtc->crtc.state); > + > + vsp1_du_atomic_flush(crtc->vsp->vsp, crtc->vsp_pipe, &cfg); > +} > + > +static const u32 rzg2l_du_vsp_formats[] = { > + DRM_FORMAT_RGB332, > + DRM_FORMAT_ARGB4444, > + DRM_FORMAT_XRGB4444, > + DRM_FORMAT_ARGB1555, > + DRM_FORMAT_XRGB1555, > + DRM_FORMAT_RGB565, > + DRM_FORMAT_BGR888, > + DRM_FORMAT_RGB888, > + DRM_FORMAT_BGRA8888, > + DRM_FORMAT_BGRX8888, > + DRM_FORMAT_ARGB8888, > + DRM_FORMAT_XRGB8888, > + DRM_FORMAT_UYVY, > + DRM_FORMAT_YUYV, > + DRM_FORMAT_YVYU, > + DRM_FORMAT_NV12, > + DRM_FORMAT_NV21, > + DRM_FORMAT_NV16, > + DRM_FORMAT_NV61, > + DRM_FORMAT_YUV420, > + DRM_FORMAT_YVU420, > + DRM_FORMAT_YUV422, > + DRM_FORMAT_YVU422, > + DRM_FORMAT_YUV444, > + DRM_FORMAT_YVU444, > +}; > + > +static void rzg2l_du_vsp_plane_setup(struct rzg2l_du_vsp_plane *plane) > +{ > + struct rzg2l_du_vsp_plane_state *state = > + to_rzg2l_vsp_plane_state(plane->plane.state); > + struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(state->state.crtc); > + struct drm_framebuffer *fb = plane->plane.state->fb; > + const struct rzg2l_du_format_info *format; > + struct vsp1_du_atomic_config cfg = { > + .pixelformat = 0, > + .pitch = fb->pitches[0], > + .alpha = state->state.alpha >> 8, > + .zpos = state->state.zpos, > + }; > + u32 fourcc = state->format->fourcc; > + unsigned int i; > + > + cfg.src.left = state->state.src.x1 >> 16; > + cfg.src.top = state->state.src.y1 >> 16; > + cfg.src.width = drm_rect_width(&state->state.src) >> 16; > + cfg.src.height = drm_rect_height(&state->state.src) >> 16; > + > + cfg.dst.left = state->state.dst.x1; > + cfg.dst.top = state->state.dst.y1; > + cfg.dst.width = drm_rect_width(&state->state.dst); > + cfg.dst.height = drm_rect_height(&state->state.dst); > + > + for (i = 0; i < state->format->planes; ++i) > + cfg.mem[i] = sg_dma_address(state->sg_tables[i].sgl) > + + fb->offsets[i]; > + > + if (state->state.pixel_blend_mode == DRM_MODE_BLEND_PIXEL_NONE) { > + switch (fourcc) { > + case DRM_FORMAT_ARGB1555: > + fourcc = DRM_FORMAT_XRGB1555; > + break; > + > + case DRM_FORMAT_ARGB4444: > + fourcc = DRM_FORMAT_XRGB4444; > + break; > + > + case DRM_FORMAT_ARGB8888: > + fourcc = DRM_FORMAT_XRGB8888; > + break; > + } > + } > + > + format = rzg2l_du_format_info(fourcc); > + cfg.pixelformat = format->v4l2; > + > + cfg.premult = state->state.pixel_blend_mode == DRM_MODE_BLEND_PREMULTI; > + > + vsp1_du_atomic_update(plane->vsp->vsp, crtc->vsp_pipe, > + plane->index, &cfg); > +} > + > +int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb, > + struct sg_table sg_tables[3]) > +{ > + struct rzg2l_du_device *rcdu = vsp->dev; > + unsigned int i, j; > + int ret; > + > + for (i = 0; i < fb->format->num_planes; ++i) { > + struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i); > + struct sg_table *sgt = &sg_tables[i]; > + > + if (gem->sgt) { > + struct scatterlist *src; > + struct scatterlist *dst; > + > + /* > + * If the GEM buffer has a scatter gather table, it has > + * been imported from a dma-buf and has no physical > + * address as it might not be physically contiguous. > + * Copy the original scatter gather table to map it to > + * the VSP. > + */ > + ret = sg_alloc_table(sgt, gem->sgt->orig_nents, > + GFP_KERNEL); > + if (ret) > + goto fail; > + > + src = gem->sgt->sgl; > + dst = sgt->sgl; > + for (j = 0; j < gem->sgt->orig_nents; ++j) { > + sg_set_page(dst, sg_page(src), src->length, > + src->offset); > + src = sg_next(src); > + dst = sg_next(dst); > + } > + } else { > + ret = dma_get_sgtable(rcdu->dev, sgt, gem->vaddr, > + gem->dma_addr, gem->base.size); > + if (ret) > + goto fail; > + } > + > + ret = vsp1_du_map_sg(vsp->vsp, sgt); > + if (ret) { > + sg_free_table(sgt); > + goto fail; > + } > + } > + > + return 0; > + > +fail: > + while (i--) { > + struct sg_table *sgt = &sg_tables[i]; > + > + vsp1_du_unmap_sg(vsp->vsp, sgt); > + sg_free_table(sgt); > + } > + > + return ret; > +} > + > +static int rzg2l_du_vsp_plane_prepare_fb(struct drm_plane *plane, > + struct drm_plane_state *state) > +{ > + struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state); > + struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp; > + int ret; > + > + /* > + * There's no need to prepare (and unprepare) the framebuffer when the > + * plane is not visible, as it will not be displayed. > + */ > + if (!state->visible) > + return 0; > + > + ret = rzg2l_du_vsp_map_fb(vsp, state->fb, rstate->sg_tables); > + if (ret < 0) > + return ret; > + > + return drm_gem_plane_helper_prepare_fb(plane, state); > +} > + > +void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb, > + struct sg_table sg_tables[3]) > +{ > + unsigned int i; > + > + for (i = 0; i < fb->format->num_planes; ++i) { > + struct sg_table *sgt = &sg_tables[i]; > + > + vsp1_du_unmap_sg(vsp->vsp, sgt); > + sg_free_table(sgt); > + } > +} > + > +static void rzg2l_du_vsp_plane_cleanup_fb(struct drm_plane *plane, > + struct drm_plane_state *state) > +{ > + struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(state); > + struct rzg2l_du_vsp *vsp = to_rzg2l_vsp_plane(plane)->vsp; > + > + if (!state->visible) > + return; > + > + rzg2l_du_vsp_unmap_fb(vsp, state->fb, rstate->sg_tables); > +} > + > +static int __rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane, > + struct drm_plane_state *state, > + const struct rzg2l_du_format_info **format) > +{ > + struct drm_crtc_state *crtc_state; > + int ret; > + > + if (!state->crtc) { > + /* > + * The visible field is not reset by the DRM core but only > + * updated by drm_atomic_helper_check_plane_state, set it > + * manually. > + */ > + state->visible = false; > + *format = NULL; > + return 0; > + } > + > + crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc); > + if (IS_ERR(crtc_state)) > + return PTR_ERR(crtc_state); > + > + ret = drm_atomic_helper_check_plane_state(state, crtc_state, > + DRM_PLANE_NO_SCALING, > + DRM_PLANE_NO_SCALING, > + true, true); > + if (ret < 0) > + return ret; > + > + if (!state->visible) { > + *format = NULL; > + return 0; > + } > + > + *format = rzg2l_du_format_info(state->fb->format->format); > + > + return 0; > +} > + > +static int rzg2l_du_vsp_plane_atomic_check(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, > + plane); > + struct rzg2l_du_vsp_plane_state *rstate = to_rzg2l_vsp_plane_state(new_plane_state); > + > + return __rzg2l_du_vsp_plane_atomic_check(plane, new_plane_state, &rstate->format); > +} > + > +static void rzg2l_du_vsp_plane_atomic_update(struct drm_plane *plane, > + struct drm_atomic_state *state) > +{ > + struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane); > + struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, plane); > + struct rzg2l_du_vsp_plane *rplane = to_rzg2l_vsp_plane(plane); > + struct rzg2l_du_crtc *crtc = to_rzg2l_crtc(old_state->crtc); > + > + if (new_state->visible) > + rzg2l_du_vsp_plane_setup(rplane); > + else if (old_state->crtc) > + vsp1_du_atomic_update(rplane->vsp->vsp, crtc->vsp_pipe, > + rplane->index, NULL); > +} > + > +static const struct drm_plane_helper_funcs rzg2l_du_vsp_plane_helper_funcs = { > + .prepare_fb = rzg2l_du_vsp_plane_prepare_fb, > + .cleanup_fb = rzg2l_du_vsp_plane_cleanup_fb, > + .atomic_check = rzg2l_du_vsp_plane_atomic_check, > + .atomic_update = rzg2l_du_vsp_plane_atomic_update, > +}; > + > +static struct drm_plane_state * > +rzg2l_du_vsp_plane_atomic_duplicate_state(struct drm_plane *plane) > +{ > + struct rzg2l_du_vsp_plane_state *copy; > + > + if (WARN_ON(!plane->state)) > + return NULL; > + > + copy = kzalloc(sizeof(*copy), GFP_KERNEL); > + if (!copy) > + return NULL; > + > + __drm_atomic_helper_plane_duplicate_state(plane, ©->state); > + > + return ©->state; > +} > + > +static void rzg2l_du_vsp_plane_atomic_destroy_state(struct drm_plane *plane, > + struct drm_plane_state *state) > +{ > + __drm_atomic_helper_plane_destroy_state(state); > + kfree(to_rzg2l_vsp_plane_state(state)); > +} > + > +static void rzg2l_du_vsp_plane_reset(struct drm_plane *plane) > +{ > + struct rzg2l_du_vsp_plane_state *state; > + > + if (plane->state) { > + rzg2l_du_vsp_plane_atomic_destroy_state(plane, plane->state); > + plane->state = NULL; > + } > + > + state = kzalloc(sizeof(*state), GFP_KERNEL); > + if (!state) > + return; > + > + __drm_atomic_helper_plane_reset(plane, &state->state); > +} > + > +static const struct drm_plane_funcs rzg2l_du_vsp_plane_funcs = { > + .update_plane = drm_atomic_helper_update_plane, > + .disable_plane = drm_atomic_helper_disable_plane, > + .reset = rzg2l_du_vsp_plane_reset, > + .destroy = drm_plane_cleanup, > + .atomic_duplicate_state = rzg2l_du_vsp_plane_atomic_duplicate_state, > + .atomic_destroy_state = rzg2l_du_vsp_plane_atomic_destroy_state, > +}; > + > +static void rzg2l_du_vsp_cleanup(struct drm_device *dev, void *res) > +{ > + struct rzg2l_du_vsp *vsp = res; > + unsigned int i; > + > + for (i = 0; i < vsp->num_planes; ++i) { > + struct rzg2l_du_vsp_plane *plane = &vsp->planes[i]; > + > + drm_plane_cleanup(&plane->plane); > + } > + > + kfree(vsp->planes); > + > + put_device(vsp->vsp); > +} > + > +int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np, > + unsigned int crtcs) > +{ > + struct rzg2l_du_device *rcdu = vsp->dev; > + struct platform_device *pdev; > + unsigned int num_crtcs = hweight32(crtcs); > + unsigned int num_planes = 2; > + unsigned int i; > + int ret; > + > + /* Find the VSP device and initialize it. */ > + pdev = of_find_device_by_node(np); > + if (!pdev) > + return -ENXIO; > + > + vsp->vsp = &pdev->dev; > + > + ret = drmm_add_action_or_reset(&rcdu->ddev, rzg2l_du_vsp_cleanup, vsp); > + if (ret < 0) > + return ret; > + > + ret = vsp1_du_init(vsp->vsp); > + if (ret < 0) > + return ret; > + > + vsp->planes = kcalloc(num_planes, sizeof(*vsp->planes), GFP_KERNEL); > + if (!vsp->planes) > + return -ENOMEM; > + > + for (i = 0; i < num_planes; ++i) { > + enum drm_plane_type type = i < num_crtcs > + ? DRM_PLANE_TYPE_PRIMARY > + : DRM_PLANE_TYPE_OVERLAY; > + struct rzg2l_du_vsp_plane *plane = &vsp->planes[i]; > + > + plane->vsp = vsp; > + plane->index = i; > + ret = drm_universal_plane_init(&rcdu->ddev, &plane->plane, > + crtcs, &rzg2l_du_vsp_plane_funcs, > + rzg2l_du_vsp_formats, > + ARRAY_SIZE(rzg2l_du_vsp_formats), > + NULL, type, NULL); > + if (ret < 0) > + return ret; > + > + drm_plane_helper_add(&plane->plane, > + &rzg2l_du_vsp_plane_helper_funcs); > + > + drm_plane_create_alpha_property(&plane->plane); > + drm_plane_create_zpos_property(&plane->plane, i, 0, > + num_planes - 1); > + > + drm_plane_create_blend_mode_property(&plane->plane, > + BIT(DRM_MODE_BLEND_PIXEL_NONE) | > + BIT(DRM_MODE_BLEND_PREMULTI) | > + BIT(DRM_MODE_BLEND_COVERAGE)); > + > + vsp->num_planes++; > + } > + > + return 0; > +} I'm not too familiar with the VSP and I cannot tell if the above properties apply to RZ/G2L as well as it does to R-Car, but apart from the question about the number of CRTCs, it looks fine to me. > diff --git a/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h > new file mode 100644 > index 000000000000..d73d49a6930c > --- /dev/null > +++ b/drivers/gpu/drm/renesas/rz-du/rzg2l_du_vsp.h > @@ -0,0 +1,97 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * RZ/G2L Display Unit VSP-Based Compositor > + * > + * Copyright (C) 2023 Renesas Electronics Corporation > + * > + * Based on rcar_du_vsp.h > + */ > + > +#ifndef __RZG2L_DU_VSP_H__ > +#define __RZG2L_DU_VSP_H__ > + > +#include <drm/drm_plane.h> > +#include <linux/container_of.h> > +#include <linux/scatterlist.h> > + > +struct device; > +struct drm_framebuffer; > +struct rzg2l_du_device; > +struct rzg2l_du_format_info; > +struct rzg2l_du_vsp; > + > +struct rzg2l_du_vsp_plane { > + struct drm_plane plane; > + struct rzg2l_du_vsp *vsp; > + unsigned int index; > +}; > + > +struct rzg2l_du_vsp { > + unsigned int index; > + struct device *vsp; > + struct rzg2l_du_device *dev; > + struct rzg2l_du_vsp_plane *planes; > + unsigned int num_planes; > +}; > + > +static inline struct rzg2l_du_vsp_plane *to_rzg2l_vsp_plane(struct drm_plane *p) > +{ > + return container_of(p, struct rzg2l_du_vsp_plane, plane); > +} > + > +/** > + * struct rzg2l_du_vsp_plane_state - Driver-specific plane state > + * @state: base DRM plane state > + * @format: information about the pixel format used by the plane > + * @sg_tables: scatter-gather tables for the frame buffer memory > + */ > +struct rzg2l_du_vsp_plane_state { > + struct drm_plane_state state; > + > + const struct rzg2l_du_format_info *format; > + struct sg_table sg_tables[3]; > +}; > + > +static inline struct rzg2l_du_vsp_plane_state * > +to_rzg2l_vsp_plane_state(struct drm_plane_state *state) > +{ > + return container_of(state, struct rzg2l_du_vsp_plane_state, state); > +} > + > +#ifdef CONFIG_DRM_RCAR_VSP > +int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np, > + unsigned int crtcs); > +void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc); > +void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc); > +void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc); > +void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc); > +int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb, > + struct sg_table sg_tables[3]); > +void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, struct drm_framebuffer *fb, > + struct sg_table sg_tables[3]); > +#else > +static inline int rzg2l_du_vsp_init(struct rzg2l_du_vsp *vsp, struct device_node *np, > + unsigned int crtcs) > +{ > + return -ENXIO; > +} > + > +static inline void rzg2l_du_vsp_enable(struct rzg2l_du_crtc *crtc) { }; > +static inline void rzg2l_du_vsp_disable(struct rzg2l_du_crtc *crtc) { }; > +static inline void rzg2l_du_vsp_atomic_begin(struct rzg2l_du_crtc *crtc) { }; > +static inline void rzg2l_du_vsp_atomic_flush(struct rzg2l_du_crtc *crtc) { }; > +static inline int rzg2l_du_vsp_map_fb(struct rzg2l_du_vsp *vsp, > + struct drm_framebuffer *fb, > + struct sg_table sg_tables[3]) > +{ > + return -ENXIO; > +} > + > +static inline void rzg2l_du_vsp_unmap_fb(struct rzg2l_du_vsp *vsp, > + struct drm_framebuffer *fb, > + struct sg_table sg_tables[3]) > +{ > +} > +#endif > + > +#endif /* __RZG2L_DU_VSP_H__ */ > -- > 2.25.1 >
