Re: [PATCH 0/3] drm/ci: Add support for SM8250 Gitlab Runner

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 11/4/2023 6:02 AM, Helen Koike wrote:
Hi Jessica,

On 10/10/2023 19:25, Jessica Zhang wrote:
Recently, we've registered a Gitlab runner for a Qualcomm RB5 device that will be
hosted and maintained in Qualcomm labs.

This series will add a corresponding CI job for testing SM8250 devices and add the skip/fails/flakes list. We were able to complete a successful run [1] with these
changes.

For now, we will keep the job as manual trigger only and drop that rule later
after we stabilize the tests.

[1] https://gitlab.freedesktop.org/drm/msm/-/jobs/50092719

---

Thank you for you patchset.

I'm getting the following error:

"serial.serialutil.SerialException: [Errno 2] could not open port /dev/ttyUSB0: [Errno 2] No such file or directory: '/dev/ttyUSB0'"

https://gitlab.freedesktop.org/helen.fornazier/linux/-/jobs/51193215#L146

I'm wondering if I'm missing some configuration.

I tested on top of drm-misc-next.

Hi Helen,

Sorry for the inconvenience, but I had to temporarily take down the runner last Friday to physically move the setup (as part of a reorganization of our lab here).

I'll update this thread as soon as the runner is back up -- the move will be complete by the end of this week.


Also, I'd like to add in the docs an entry about the devices we have, which tag they need, which dts they correspond to, which farm they are located, who to contact if there is any problem and maybe some comment about the device (how it is hooked up, the logs comes from uart or ssh, does it use fastboot, etc) if you find it useful. Would you mind adding an entry in the docs with this information for the sm8250? (Than I'll add the info of the other devices after yours).

Sure, sounds good.



Jessica Zhang (3):
       drm/ci: Add SM8250 job to CI

I would also move this patch to last, so we don't have a commit where things shouldn't work properly.
Or maybe squash them all.

Acked -- I'll move this patch to the end.

Thanks,

Jessica Zhang


Regards,
Helen

       drm/ci: enable CONFIG_INTERCONNECT_QCOM_SM8250 for arm64 config
       drm/ci: Add skips, fails and flakes for SM8250

  drivers/gpu/drm/ci/arm64.config                 |  1 +
  drivers/gpu/drm/ci/build.sh                     |  1 +
  drivers/gpu/drm/ci/test.yml                     | 15 +++++++++++++
  drivers/gpu/drm/ci/xfails/msm-sm8250-fails.txt  | 29 +++++++++++++++++++++++++
  drivers/gpu/drm/ci/xfails/msm-sm8250-flakes.txt |  3 +++
  drivers/gpu/drm/ci/xfails/msm-sm8250-skips.txt  |  8 +++++++
  6 files changed, 57 insertions(+)
---
base-commit: dcd88f8c63341ed11a8c5019408f62202cd9d1f2
change-id: 20230919-rb5-runner-77ec32bd61e7

Best regards,



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux