Re: [RFC PATCH v1 12/12] usb: typec: qcom: define the bridge's path

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 30 Oct 2023 at 10:19, Heikki Krogerus
<heikki.krogerus@xxxxxxxxxxxxxxx> wrote:
>
> On Mon, Oct 23, 2023 at 09:24:33PM +0300, Dmitry Baryshkov wrote:
> > On 15 September 2023 15:14:35 EEST, Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx> wrote:
> > >Hi Dmitry,
> > >
> > >On Mon, Sep 04, 2023 at 12:41:50AM +0300, Dmitry Baryshkov wrote:
> > >> In order to notify the userspace about the DRM connector's USB-C port,
> > >> export the corresponding port's name as the bridge's path field.
> > >>
> > >> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> > >> ---
> > >>  drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c     | 11 +++++++----
> > >>  drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_drm.c |  4 +++-
> > >>  drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_drm.h |  6 ++++--
> > >>  3 files changed, 14 insertions(+), 7 deletions(-)
> > >>
> > >> diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
> > >> index b9d4856101c7..452dc6437861 100644
> > >> --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
> > >> +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
> > >> @@ -156,6 +156,7 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
> > >>    struct device_node *np = dev->of_node;
> > >>    const struct pmic_typec_resources *res;
> > >>    struct regmap *regmap;
> > >> +  char *tcpm_name;
> > >>    u32 base[2];
> > >>    int ret;
> > >>
> > >> @@ -211,10 +212,6 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
> > >>    mutex_init(&tcpm->lock);
> > >>    platform_set_drvdata(pdev, tcpm);
> > >>
> > >> -  tcpm->pmic_typec_drm = qcom_pmic_typec_init_drm(dev);
> > >> -  if (IS_ERR(tcpm->pmic_typec_drm))
> > >> -          return PTR_ERR(tcpm->pmic_typec_drm);
> > >> -
> > >>    tcpm->tcpc.fwnode = device_get_named_child_node(tcpm->dev, "connector");
> > >>    if (!tcpm->tcpc.fwnode)
> > >>            return -EINVAL;
> > >> @@ -225,6 +222,12 @@ static int qcom_pmic_typec_probe(struct platform_device *pdev)
> > >>            goto fwnode_remove;
> > >>    }
> > >>
> > >> +  tcpm_name = tcpm_port_get_name(tcpm->tcpm_port);
> > >> +  tcpm->pmic_typec_drm = qcom_pmic_typec_init_drm(dev, tcpm_name);
> > >
> > >So I got some questions and concerns off-list. This was one of the
> > >concerns. That tcpm_name is now the actual port device name, so I'm
> > >afraid this is not acceptable.
> > >
> > >You can't use device name as a reference, ever. There is no way to
> > >guarantee that a device with a specific name is what you meant it to
> > >be by the time it's accessed.
> >
> > Hmm, could you please be more specific, why? I mean, class devices are not
> > that easy to be renamed in sysfs, are they? Or are you concerned about the
> > device being destroyed behind userspace's back? At least for MSM this will be
> > a huge problem already, with the bridge driver suddenly being removed.
>
> The race exists even in your case, but please do not look at this as a
> solution for only your platform.

Yes!

>
> This is about showing the user space a link between two device
> instances (struct device), and the way you do that is by creating a
> symlink. That way the kernel can take care of reference counting and
> guarantee that the link always points to the correct device. That way
> the link will also be always visible in user space without requirement
> for any specific ABI like it should.

I'm fine with the symlink approach (and I'll follow that up after
finishing the UCSI glue driver rework). However I feel several
deficiencies there:

1) It creates asymmetry with the DP MST case. Do we want to have
symlinks in each of the MST connectors? Or do we follow the PATH
properties in the MST case until we find the root port, which has
symlink? Please note, that fine X11 renames DP MST connectors
internally, so in xrandr I see DP-2-1, which maps to
/sys/class/drm/card0-DP-2. Kind of hard to follow.

2) For the multi-card cases, one has to remap the connector to the
card index + connector path. And this needs to be done by all user
space applications, which would like to present this kind of
information for the user.

3) If we were to support non-USB-C connectors (e.g. MyDP / SlimPort
and MHL used simple micro-USB connectors) there would be a completely
new uABI. And any external port / wrapper will also require a
completely new symlink kind.

I understand your concerns regarding mentioning external device in the
PATH property. However I think we should make it easier for the
userspace app to determine the kind of the external connector. What
would you think about extending the PATH property in the following
way:

For the USB-C connectors the PATH property has the value of
`typec:cardN-DP-m` value. Userspace app can then look for the
typec_connector symlink at the /sys/class/drm/cardN-DP-m subdir to
find the information about the corresponding USB-C port.

In future this will allow us to define e.g.:

For the SlimPort / MyDP the PATH property has the value of
`micro_usb:cardN-HDMI-m` or `micro_usb:cardN-DP-m`. The symlink is
called /sys/class/drm/cardN-DP-m/micro_usb_connector.

Or:

For the SlimPort / MyDP the PATH property has the value of
`mydp:cardN-HDMI-m` or `mydp:cardN-DP-m`. The symlink is called
/sys/class/drm/cardN-DP-m/mydp_connector.


-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux