Re: [PATCH RFC v6 08/10] drm/msm/dpu: Allow NULL FBs in atomic commit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 9/24/2023 3:29 AM, Dmitry Baryshkov wrote:
On 29/08/2023 03:05, Jessica Zhang wrote:
Since solid fill planes allow for a NULL framebuffer in a valid commit,
add NULL framebuffer checks to atomic commit calls within DPU.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Signed-off-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
  drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c  |  9 ++++++-
  drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c | 41 ++++++++++++++++++++-----------
  2 files changed, 34 insertions(+), 16 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
index 8ce7586e2ddf..5e845510e8c1 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c
@@ -451,6 +451,7 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
      struct drm_plane_state *state;
      struct dpu_crtc_state *cstate = to_dpu_crtc_state(crtc->state);
      struct dpu_plane_state *pstate = NULL;
+    const struct msm_format *fmt;
      struct dpu_format *format;
      struct dpu_hw_ctl *ctl = mixer->lm_ctl;
@@ -470,7 +471,13 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
          pstate = to_dpu_plane_state(state);
          fb = state->fb;
-        format = to_dpu_format(msm_framebuffer_format(pstate->base.fb));
+        if (drm_plane_solid_fill_enabled(state))
+            fmt = dpu_get_msm_format(&_dpu_crtc_get_kms(crtc)->base,
+                    DRM_FORMAT_ABGR8888, 0);
+        else
+            fmt = msm_framebuffer_format(pstate->base.fb);
+
+        format = to_dpu_format(fmt);
          if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
              bg_alpha_enable = true;
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
index c2aaaded07ed..114c803ff99b 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c
@@ -837,8 +837,13 @@ static int dpu_plane_atomic_check(struct drm_plane *plane,
      pipe_cfg->dst_rect = new_plane_state->dst;
-    fb_rect.x2 = new_plane_state->fb->width;
-    fb_rect.y2 = new_plane_state->fb->height;
+    if (drm_plane_solid_fill_enabled(new_plane_state))
+        return 0;

This would skip all the width checks, dpu_plane_atomic_check_pipe(), etc. Could you please confirm that all of those checks are irrelevant for solid fill?

Hi Dmitry,

Good point -- I think it would be good to keep the rect and pipe checks for solid fill.


+
+    if (new_plane_state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && new_plane_state->fb) {
+        fb_rect.x2 = new_plane_state->fb->width;
+        fb_rect.y2 = new_plane_state->fb->height;
+    }
      /* Ensure fb size is supported */
      if (drm_rect_width(&fb_rect) > MAX_IMG_WIDTH ||
@@ -1082,21 +1087,32 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
      struct drm_crtc *crtc = state->crtc;
      struct drm_framebuffer *fb = state->fb;
      bool is_rt_pipe;
-    const struct dpu_format *fmt =
-        to_dpu_format(msm_framebuffer_format(fb));
+    const struct dpu_format *fmt;
      struct dpu_sw_pipe_cfg *pipe_cfg = &pstate->pipe_cfg;
      struct dpu_sw_pipe_cfg *r_pipe_cfg = &pstate->r_pipe_cfg;
      struct dpu_kms *kms = _dpu_plane_get_kms(&pdpu->base);
      struct msm_gem_address_space *aspace = kms->base.aspace;
      struct dpu_hw_fmt_layout layout;
      bool layout_valid = false;
-    int ret;
-    ret = dpu_format_populate_layout(aspace, fb, &layout);
-    if (ret)
-        DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
-    else
-        layout_valid = true;
+    if (state->pixel_source == DRM_PLANE_PIXEL_SOURCE_FB && fb) {
+        int ret;
+
+        fmt = to_dpu_format(msm_framebuffer_format(fb));
+
+        ret = dpu_format_populate_layout(aspace, fb, &layout);
+        if (ret)
+            DPU_ERROR_PLANE(pdpu, "failed to get format layout, %d\n", ret);
+        else
+            layout_valid = true;
+
+        DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT +                ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
+                crtc->base.id, DRM_RECT_ARG(&state->dst),
+                (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
+    } else {
+        fmt = dpu_get_dpu_format(DRM_FORMAT_ABGR8888);

#define DPU_SOLID_FILL_FORMAT ?

Acked.


Also, I don't think that solid_fill planes consume bandwidth, so this likely needs to be fixed too.

You're right -- I think we can actually return early here if solid fill is enabled.

Thanks,

Jessica Zhang



+    }
      pstate->pending = true;
@@ -1104,11 +1120,6 @@ static void dpu_plane_sspp_atomic_update(struct drm_plane *plane)
      pstate->needs_qos_remap |= (is_rt_pipe != pdpu->is_rt_pipe);
      pdpu->is_rt_pipe = is_rt_pipe;
-    DPU_DEBUG_PLANE(pdpu, "FB[%u] " DRM_RECT_FP_FMT "->crtc%u " DRM_RECT_FMT -            ", %4.4s ubwc %d\n", fb->base.id, DRM_RECT_FP_ARG(&state->src),
-            crtc->base.id, DRM_RECT_ARG(&state->dst),
-            (char *)&fmt->base.pixel_format, DPU_FORMAT_IS_UBWC(fmt));
-
      dpu_plane_sspp_update_pipe(plane, pipe, pipe_cfg, fmt,
                     drm_mode_vrefresh(&crtc->mode),
                     layout_valid ? &layout : NULL);


--
With best wishes
Dmitry




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux