Il 15/09/23 12:11, Michael Walle ha scritto:
Due to the initial confusion about MIPI_DSI_MODE_EOT_PACKET, properly renamed to MIPI_DSI_MODE_NO_EOT_PACKET, reflecting its actual meaning, both the DSI_TXRX_CON register setting for bit (HSTX_)DIS_EOT and the later calculation for horizontal sync-active (HSA), back (HBP) and front (HFP) porches got incorrect due to the logic being inverted. This means that a number of settings were wrong because....: - DSI_TXRX_CON register setting: bit (HSTX_)DIS_EOT should be set in order to disable the End of Transmission packet; - Horizontal Sync and Back/Front porches: The delta used to calculate all of HSA, HBP and HFP should account for the additional EOT packet. Before this change... - Bit (HSTX_)DIS_EOT was being set when EOT packet was enabled; - For HSA/HBP/HFP delta... all three were wrong, as words were added when EOT disabled, instead of when EOT packet enabled! Invert the logic around flag MIPI_DSI_MODE_NO_EOT_PACKET in the MediaTek DSI driver to fix the aforementioned issues. Fixes: 8b2b99fd7931 ("drm/mediatek: dsi: Fine tune the line time caused by EOTp") Fixes: 2d52bfba09d1 ("drm/mediatek: add non-continuous clock mode and EOT packet control") Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
Hello CK, can you please pick this fix? Thanks, Angelo
