Padding is a new hardware module on MediaTek MT8188, add dt-bindings for it. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx> --- .../display/mediatek/mediatek,padding.yaml | 81 +++++++++++++++++++ 1 file changed, 81 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml new file mode 100644 index 000000000000..db24801ebc48 --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Display Padding + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@xxxxxxxxxx> + - Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> + +description: + Padding provides ability to add pixels to width and height of a layer with + specified colors. Due to hardware design, Mixer in VDOSYS1 requires + width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled, + we need Padding to deal with odd width. + Please notice that even if the Padding is in bypass mode, settings in + register must be cleared to 0, or undefined behaviors could happen. + +properties: + compatible: + const: mediatek,mt8188-padding + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: RDMA Clock + + mediatek,gce-client-reg: + description: + GCE (Global Command Engine) is a multi-core micro processor that helps + its clients to execute commands without interrupting CPU. This property + describes GCE client's information that is composed by 4 fields. + 1. Phandle of the GCE (there may be several GCE processors) + 2. Sub-system ID defined in the dt-binding like a user ID + (Please refer to include/dt-bindings/gce/<chip>-gce.h) + 3. Offset from base address of the subsys you are at + 4. Size of the register the client needs + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: Phandle of the GCE + - description: Subsys ID defined in the dt-binding + - description: Offset from base address of the subsys + - description: Size of register + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mediatek,mt8188-clk.h> + #include <dt-bindings/power/mediatek,mt8188-power.h> + #include <dt-bindings/gce/mt8195-gce.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + padding0: padding@1c11d000 { + compatible = "mediatek,mt8188-padding"; + reg = <0 0x1c11d000 0 0x1000>; + clocks = <&vdosys1 CLK_VDO1_PADDING0>; + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; + }; + }; -- 2.18.0
