From: Chris Morgan <macromorgan@xxxxxxxxxxx> The Powkiddy RGB30 4 inch panel is a 4 inch 720x720 DSI panel used in the Powkiddy RGB30 handheld gaming device. Add support for it. TODO: The panel seems to not resume properly from suspend. I've confirmed on the other ST7703 based devices it works correctly. Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-sitronix-st7703.c | 89 +++++++++++++++++++ 1 file changed, 89 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c index 6a3945639535..a9892a4447fb 100644 --- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c +++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c @@ -433,6 +433,94 @@ static const struct st7703_panel_desc rg353v2_desc = { .init_sequence = rg353v2_init_sequence, }; +static int rgb30panel_init_sequence(struct st7703 *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + /* Init sequence extracted from Powkiddy RGB30 BSP kernel. */ + + /* + * For some reason this specific panel must be taken out of sleep + * before the full init sequence, or else it will not display. + */ + mipi_dsi_dcs_exit_sleep_mode(dsi); + msleep(250); + + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEXTC, 0xf1, 0x12, 0x83); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETMIPI, 0x33, 0x81, 0x05, 0xf9, + 0x0e, 0x0e, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x44, 0x25, 0x00, 0x90, 0x0a, 0x00, + 0x00, 0x01, 0x4f, 0x01, 0x00, 0x00, 0x37); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER_EXT, 0x25, 0x22, 0xf0, + 0x63); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_UNKNOWN_BF, 0x02, 0x11, 0x00); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETRGBIF, 0x10, 0x10, 0x28, + 0x28, 0x03, 0xff, 0x00, 0x00, 0x00, 0x00); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETSCR, 0x73, 0x73, 0x50, 0x50, + 0x00, 0x00, 0x12, 0x70, 0x00); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVDC, 0x46); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0b); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETCYC, 0x80); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETDISP, 0x3c, 0x12, 0x30); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETEQ, 0x07, 0x07, 0x0b, 0x0b, + 0x03, 0x0b, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, + 0xc0, 0x10); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETPOWER, 0x36, 0x00, 0x32, + 0x32, 0x77, 0xf1, 0xcc, 0xcc, 0x77, 0x77, 0x33, + 0x33); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETBGP, 0x0a, 0x0a); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETVCOM, 0x88, 0x88); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP1, 0xc8, 0x10, 0x0a, 0x10, + 0x0f, 0xa1, 0x80, 0x12, 0x31, 0x23, 0x47, 0x86, + 0xa1, 0x80, 0x47, 0x08, 0x00, 0x00, 0x0d, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x0d, 0x00, 0x00, 0x00, + 0x48, 0x02, 0x8b, 0xaf, 0x46, 0x02, 0x88, 0x88, + 0x88, 0x88, 0x88, 0x48, 0x13, 0x8b, 0xaf, 0x57, + 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGIP2, 0x96, 0x12, 0x01, 0x01, + 0x01, 0x78, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x4f, 0x31, 0x8b, 0xa8, 0x31, 0x75, 0x88, 0x88, + 0x88, 0x88, 0x88, 0x4f, 0x20, 0x8b, 0xa8, 0x20, + 0x64, 0x88, 0x88, 0x88, 0x88, 0x88, 0x23, 0x00, + 0x00, 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x40, 0xa1, 0x80, 0x00, 0x00, 0x00, + 0x00); + mipi_dsi_dcs_write_seq(dsi, ST7703_CMD_SETGAMMA, 0x00, 0x0a, 0x0f, + 0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d, 0x10, + 0x13, 0x15, 0x14, 0x15, 0x10, 0x17, 0x00, 0x0a, + 0x0f, 0x29, 0x3b, 0x3f, 0x42, 0x39, 0x06, 0x0d, + 0x10, 0x13, 0x15, 0x14, 0x15, 0x10, 0x17); + + return 0; +} + +static const struct drm_display_mode rgb30panel_mode = { + .hdisplay = 720, + .hsync_start = 720 + 45, + .hsync_end = 720 + 45 + 4, + .htotal = 720 + 45 + 4 + 45, + .vdisplay = 720, + .vsync_start = 720 + 15, + .vsync_end = 720 + 15 + 3, + .vtotal = 720 + 15 + 3 + 11, + .clock = 36570, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 76, + .height_mm = 76, +}; + +static const struct st7703_panel_desc rgb30panel_desc = { + .mode = &rgb30panel_mode, + .lanes = 4, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_LPM, + .format = MIPI_DSI_FMT_RGB888, + .init_sequence = rgb30panel_init_sequence, +}; + static int st7703_enable(struct drm_panel *panel) { struct st7703 *ctx = panel_to_st7703(panel); @@ -694,6 +782,7 @@ static void st7703_remove(struct mipi_dsi_device *dsi) static const struct of_device_id st7703_of_match[] = { { .compatible = "anbernic,rg353v-panel-v2", .data = &rg353v2_desc }, + { .compatible = "powkiddy,rgb30-panel", .data = &rgb30panel_desc }, { .compatible = "rocktech,jh057n00900", .data = &jh057n00900_panel_desc }, { .compatible = "xingbangda,xbd599", .data = &xbd599_desc }, { /* sentinel */ } -- 2.34.1