- Reset ID must starts from 0 and be consecutive, but the reset bits in our hardware design is not continuous, some bits are left unused, we need a map to solve the problem - Use old style 1-to-1 mapping if .rst_tb is not defined Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Signed-off-by: Hsiao Chien Sung <shawn.sung@xxxxxxxxxxxx> --- drivers/soc/mediatek/mtk-mmsys.c | 9 +++++++++ drivers/soc/mediatek/mtk-mmsys.h | 3 +++ 2 files changed, 12 insertions(+) diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c index aa6014d25420..be061df8a39d 100644 --- a/drivers/soc/mediatek/mtk-mmsys.c +++ b/drivers/soc/mediatek/mtk-mmsys.c @@ -314,6 +314,15 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l u32 offset; u32 reg; + if (mmsys->data->rst_tb) { + if (id >= mmsys->data->num_resets) { + dev_err(rcdev->dev, "Invalid reset ID: %lu (>=%u)\n", + id, mmsys->data->num_resets); + return -EINVAL; + } + id = mmsys->data->rst_tb[id]; + } + offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32); id = id % MMSYS_SW_RESET_PER_REG; reg = mmsys->data->sw0_rst_offset + offset; diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h index 49851bc7aa9e..c90419c96a7d 100644 --- a/drivers/soc/mediatek/mtk-mmsys.h +++ b/drivers/soc/mediatek/mtk-mmsys.h @@ -78,6 +78,8 @@ #define DSI_SEL_IN_RDMA 0x1 #define DSI_SEL_IN_MASK 0x1 +#define MMSYS_RST_NR(bank, bit) (((bank) * 32) + (bit)) + struct mtk_mmsys_routes { u32 from_comp; u32 to_comp; @@ -119,6 +121,7 @@ struct mtk_mmsys_driver_data { const struct mtk_mmsys_routes *routes; const unsigned int num_routes; const u16 sw0_rst_offset; + const u8 *rst_tb; const u32 num_resets; const bool is_vppsys; const u8 vsync_len; -- 2.18.0