Re: [PATCH v2 00/15] sysctl: Remove sentinel elements from drivers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 02, 2023 at 12:27:18PM +0000, Christophe Leroy wrote:
> 
> 
> Le 02/10/2023 à 10:55, Joel Granados via B4 Relay a écrit :
> > From: Joel Granados <j.granados@xxxxxxxxxxx>
> > 
<--- snip --->
> >          - The "yesall" config saves 2432 bytes [4]
> >          - The "tiny" config saves 64 bytes [5]
> >      * memory usage:
> >          In this case there were no bytes saved because I do not have any
> >          of the drivers in the patch. To measure it comment the printk in
> >          `new_dir` and uncomment the if conditional in `new_links` [3].
> > 
> > ---
> > Changes in v2:
> > - Left the dangling comma in the ctl_table arrays.
> > - Link to v1: https://lore.kernel.org/r/20230928-jag-sysctl_remove_empty_elem_drivers-v1-0-e59120fca9f9@xxxxxxxxxxx
> > 
> > Comments/feedback greatly appreciated
> 
> Same problem on powerpc CI tests, all boot target failed, most of them 
> with similar OOPS, see 
> https://patchwork.ozlabs.org/project/linuxppc-dev/patch/20231002-jag-sysctl_remove_empty_elem_drivers-v2-15-02dd0d46f71e@xxxxxxxxxxx/
I found the culprit!. Here you are rebasing on top of v6.5.0-rc6 "INFO:
Looking for kernel version: 6.5.0-rc6-gbf2ac4d7d596". The error makes
sense becuase in that version we have not introduced the stopping
criteria based on the ctl_table array size, so the loop continues
looking for an empty sentinel past valid memory (and does not find it).
The ctl_table check catches it but then fails to do a proper error
because we have already tried to access invalid memory. The solution
here is to make sure to rebase in on top of the latest rc in v6.6.

> 
> What is strange is that I pushed your series into my github account, and 
> got no failure, see https://github.com/chleroy/linux/actions/runs/6378951278
And here it works because you use the latest rc : "INFO: Looking for
kernel version: 6.6.0-rc3-g23d4b5db743c"

> 
> Christophe
> 
> > 
> > Best
> > 
> > Joel
> > 
> > [1]
> > We are able to remove a sentinel table without behavioral change by
> > introducing a table_size argument in the same place where procname is
> > checked for NULL. The idea is for it to keep stopping when it hits
> > ->procname == NULL, while the sentinel is still present. And when the
> > sentinel is removed, it will stop on the table_size. You can go to
> > (https://lore.kernel.org/all/20230809105006.1198165-1-j.granados@xxxxxxxxxxx/)
> > for more information.
> > 
> > [2]
> > Links Related to the ctl_table sentinel removal:
> > * Good summary from Luis sent with the "pull request" for the
> >    preparation patches.
> >    https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@xxxxxxxxxxxxxxxxxxxxxx/
> > * Another very good summary from Luis.
> >    https://lore.kernel.org/all/ZMFizKFkVxUFtSqa@xxxxxxxxxxxxxxxxxxxxxx/
> > * This is a patch set that replaces register_sysctl_table with register_sysctl
> >    https://lore.kernel.org/all/20230302204612.782387-1-mcgrof@xxxxxxxxxx/
> > * Patch set to deprecate register_sysctl_paths()
> >    https://lore.kernel.org/all/20230302202826.776286-1-mcgrof@xxxxxxxxxx/
> > * Here there is an explicit expectation for the removal of the sentinel element.
> >    https://lore.kernel.org/all/20230321130908.6972-1-frank.li@xxxxxxxx
> > * The "ARRAY_SIZE" approach was mentioned (proposed?) in this thread
> >    https://lore.kernel.org/all/20220220060626.15885-1-tangmeng@xxxxxxxxxxxxx
> > 
> > [3]
> > To measure the in memory savings apply this on top of this patchset.
> > 
> > "
> > diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c
> > index c88854df0b62..e0073a627bac 100644
> > --- a/fs/proc/proc_sysctl.c
> > +++ b/fs/proc/proc_sysctl.c
> > @@ -976,6 +976,8 @@ static struct ctl_dir *new_dir(struct ctl_table_set *set,
> >          table[0].procname = new_name;
> >          table[0].mode = S_IFDIR|S_IRUGO|S_IXUGO;
> >          init_header(&new->header, set->dir.header.root, set, node, table, 1);
> > +       // Counts additional sentinel used for each new dir.
> > +       printk("%ld sysctl saved mem kzalloc \n", sizeof(struct ctl_table));
> > 
> >          return new;
> >   }
> > @@ -1199,6 +1201,9 @@ static struct ctl_table_header *new_links(struct ctl_dir *dir, struct ctl_table_
> >                  link_name += len;
> >                  link++;
> >          }
> > +       // Counts additional sentinel used for each new registration
> > +       //if ((head->ctl_table + head->ctl_table_size)->procname)
> > +               printk("%ld sysctl saved mem kzalloc \n", sizeof(struct ctl_table));
> >          init_header(links, dir->header.root, dir->header.set, node, link_table,
> >                      head->ctl_table_size);
> >          links->nreg = nr_entries;
> > "
> > and then run the following bash script in the kernel:
> > 
> > accum=0
> > for n in $(dmesg | grep kzalloc | awk '{print $3}') ; do
> >      echo $n
> >      accum=$(calc "$accum + $n")
> > done
> > echo $accum
> > 
> > [4]
> > add/remove: 0/0 grow/shrink: 0/21 up/down: 0/-2432 (-2432)
> > Function                                     old     new   delta
> > xpc_sys_xpc_hb                               192     128     -64
> > xpc_sys_xpc                                  128      64     -64
> > vrf_table                                    128      64     -64
> > ucma_ctl_table                               128      64     -64
> > tty_table                                    192     128     -64
> > sg_sysctls                                   128      64     -64
> > scsi_table                                   128      64     -64
> > random_table                                 448     384     -64
> > raid_table                                   192     128     -64
> > oa_table                                     192     128     -64
> > mac_hid_files                                256     192     -64
> > iwcm_ctl_table                               128      64     -64
> > ipmi_table                                   128      64     -64
> > hv_ctl_table                                 128      64     -64
> > hpet_table                                   128      64     -64
> > firmware_config_table                        192     128     -64
> > cdrom_table                                  448     384     -64
> > balloon_table                                128      64     -64
> > parport_sysctl_template                      912     720    -192
> > parport_default_sysctl_table                 584     136    -448
> > parport_device_sysctl_template               776     136    -640
> > Total: Before=429940038, After=429937606, chg -0.00%
> > 
> > [5]
> > add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-64 (-64)
> > Function                                     old     new   delta
> > random_table                                 448     384     -64
> > Total: Before=1885527, After=1885463, chg -0.00%
> > 
> > [6] https://lore.kernel.org/all/20230913-jag-sysctl_remove_empty_elem_arch-v2-0-d1bd13a29bae@xxxxxxxxxxx/
> > 
> > Signed-off-by: Joel Granados <j.granados@xxxxxxxxxxx>
> > 
> > To: Luis Chamberlain <mcgrof@xxxxxxxxxx>
> > To: willy@xxxxxxxxxxxxx
> > To: josh@xxxxxxxxxxxxxxxx
> > To: Kees Cook <keescook@xxxxxxxxxxxx>
> > To: Phillip Potter <phil@xxxxxxxxxxxxxxxx>
> > To: Clemens Ladisch <clemens@xxxxxxxxxx>
> > To: Arnd Bergmann <arnd@xxxxxxxx>
> > To: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> > To: Juergen Gross <jgross@xxxxxxxx>
> > To: Stefano Stabellini <sstabellini@xxxxxxxxxx>
> > To: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
> > To: Jiri Slaby <jirislaby@xxxxxxxxxx>
> > To: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx>
> > To: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx>
> > To: Doug Gilbert <dgilbert@xxxxxxxxxxxx>
> > To: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
> > To: Jason Gunthorpe <jgg@xxxxxxxx>
> > To: Leon Romanovsky <leon@xxxxxxxxxx>
> > To: Corey Minyard <minyard@xxxxxxx>
> > To: Theodore Ts'o <tytso@xxxxxxx>
> > To: "Jason A. Donenfeld" <Jason@xxxxxxxxx>
> > To: David Ahern <dsahern@xxxxxxxxxx>
> > To: "David S. Miller" <davem@xxxxxxxxxxxxx>
> > To: Eric Dumazet <edumazet@xxxxxxxxxx>
> > To: Jakub Kicinski <kuba@xxxxxxxxxx>
> > To: Paolo Abeni <pabeni@xxxxxxxxxx>
> > To: Robin Holt <robinmholt@xxxxxxxxx>
> > To: Steve Wahl <steve.wahl@xxxxxxx>
> > To: Russ Weight <russell.h.weight@xxxxxxxxx>
> > To: "Rafael J. Wysocki" <rafael@xxxxxxxxxx>
> > To: Song Liu <song@xxxxxxxxxx>
> > To: "K. Y. Srinivasan" <kys@xxxxxxxxxxxxx>
> > To: Haiyang Zhang <haiyangz@xxxxxxxxxxxxx>
> > To: Wei Liu <wei.liu@xxxxxxxxxx>
> > To: Dexuan Cui <decui@xxxxxxxxxxxxx>
> > To: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
> > To: Joonas Lahtinen <joonas.lahtinen@xxxxxxxxxxxxxxx>
> > To: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
> > To: Tvrtko Ursulin <tvrtko.ursulin@xxxxxxxxxxxxxxx>
> > To: David Airlie <airlied@xxxxxxxxx>
> > To: Daniel Vetter <daniel@xxxxxxxx>
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Cc: xen-devel@xxxxxxxxxxxxxxxxxxxx
> > Cc: linux-serial@xxxxxxxxxxxxxxx
> > Cc: linux-scsi@xxxxxxxxxxxxxxx
> > Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
> > Cc: linux-rdma@xxxxxxxxxxxxxxx
> > Cc: openipmi-developer@xxxxxxxxxxxxxxxxxxxxx
> > Cc: netdev@xxxxxxxxxxxxxxx
> > Cc: linux-raid@xxxxxxxxxxxxxxx
> > Cc: linux-hyperv@xxxxxxxxxxxxxxx
> > Cc: intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> > Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
> > 
> > ---
> > 
> > ---
> > Joel Granados (15):
> >        cdrom: Remove now superfluous sentinel element from ctl_table array
> >        hpet: Remove now superfluous sentinel element from ctl_table array
> >        xen: Remove now superfluous sentinel element from ctl_table array
> >        tty: Remove now superfluous sentinel element from ctl_table array
> >        scsi: Remove now superfluous sentinel element from ctl_table array
> >        parport: Remove the now superfluous sentinel element from ctl_table array
> >        macintosh: Remove the now superfluous sentinel element from ctl_table array
> >        infiniband: Remove the now superfluous sentinel element from ctl_table array
> >        char-misc: Remove the now superfluous sentinel element from ctl_table array
> >        vrf: Remove the now superfluous sentinel element from ctl_table array
> >        sgi-xp: Remove the now superfluous sentinel element from ctl_table array
> >        fw loader: Remove the now superfluous sentinel element from ctl_table array
> >        raid: Remove now superfluous sentinel element from ctl_table array
> >        Drivers: hv: Remove now superfluous sentinel element from ctl_table array
> >        intel drm: Remove now superfluous sentinel element from ctl_table array
> > 
> >   drivers/base/firmware_loader/fallback_table.c |  1 -
> >   drivers/cdrom/cdrom.c                         |  1 -
> >   drivers/char/hpet.c                           |  1 -
> >   drivers/char/ipmi/ipmi_poweroff.c             |  1 -
> >   drivers/char/random.c                         |  1 -
> >   drivers/gpu/drm/i915/i915_perf.c              |  1 -
> >   drivers/hv/hv_common.c                        |  1 -
> >   drivers/infiniband/core/iwcm.c                |  1 -
> >   drivers/infiniband/core/ucma.c                |  1 -
> >   drivers/macintosh/mac_hid.c                   |  1 -
> >   drivers/md/md.c                               |  1 -
> >   drivers/misc/sgi-xp/xpc_main.c                |  2 --
> >   drivers/net/vrf.c                             |  1 -
> >   drivers/parport/procfs.c                      | 28 +++++++++++----------------
> >   drivers/scsi/scsi_sysctl.c                    |  1 -
> >   drivers/scsi/sg.c                             |  1 -
> >   drivers/tty/tty_io.c                          |  1 -
> >   drivers/xen/balloon.c                         |  1 -
> >   18 files changed, 11 insertions(+), 35 deletions(-)
> > ---
> > base-commit: 0e945134b680040b8613e962f586d91b6d40292d
> > change-id: 20230927-jag-sysctl_remove_empty_elem_drivers-f034962a0d8c
> > 
> > Best regards,

-- 

Joel Granados

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux