The comment regarding AXI bust size configuration is a bit hard to read. Improve the wording somewhat. Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx> --- drivers/gpu/drm/mxsfb/lcdif_kms.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/mxsfb/lcdif_kms.c b/drivers/gpu/drm/mxsfb/lcdif_kms.c index 2541d2de4e45..f5bfe8b52920 100644 --- a/drivers/gpu/drm/mxsfb/lcdif_kms.c +++ b/drivers/gpu/drm/mxsfb/lcdif_kms.c @@ -329,12 +329,12 @@ static void lcdif_set_mode(struct lcdif_drm_private *lcdif, u32 bus_flags) lcdif->base + LCDC_V8_CTRLDESCL0_1); /* - * Undocumented P_SIZE and T_SIZE register but those written in the - * downstream kernel those registers control the AXI burst size. As of - * now there are two known values: + * Undocumented P_SIZE and T_SIZE bitfields written in the downstream + * driver. Those bitfields control the AXI burst size. As of now there + * are two known values: * 1 - 128Byte * 2 - 256Byte - * Downstream set it to 256B burst size to improve the memory + * Downstream sets this to 256B burst size to improve the memory access * efficiency so set it here too. */ ctrl = CTRLDESCL0_3_P_SIZE(2) | CTRLDESCL0_3_T_SIZE(2) | -- 2.39.2
