Re: [PATCH v3 1/7] drm/msm/dp: tie dp_display_irq_handler() with dp driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 18 Sept 2023 at 20:03, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
>
>
> On 9/15/2023 5:29 PM, Dmitry Baryshkov wrote:
> > On Sat, 16 Sept 2023 at 00:38, Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx> wrote:
> >> Currently the dp_display_irq_handler() is executed at msm_dp_modeset_init()
> >> which ties irq registration to the DPU device's life cycle, while depending on
> >> resources that are released as the DP device is torn down. Move register DP
> >> driver irq handler at dp_display_probe() to have dp_display_irq_handler()
> >> is tied with DP device.
> >>
> >> Changes in v3:
> >> -- move calling dp_display_irq_handler() to probe
> > Was there a changelog for the previous reivions? What is the
> > difference between v1 and v2?
>
> Sorry, v2 is same as v3.
>
> I submitted v2 first but found i forget to add change logs from review
> comments of v1.
>
> Therefore i submit v3 to add changes logs which missing at v2.

This doesn't consist of a change. It should have been a RESEND or just
responding with the changelog. V3 means new revision.

>
>
>
> >
> >> Signed-off-by: Kuogee Hsieh <quic_khsieh@xxxxxxxxxxx>
> >> ---
> >>   drivers/gpu/drm/msm/dp/dp_display.c | 35 +++++++++++++----------------------
> >>   drivers/gpu/drm/msm/dp/dp_display.h |  1 -
> >>   2 files changed, 13 insertions(+), 23 deletions(-)
> >>
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> >> index 76f1395..c217430 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> >> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> >> @@ -1193,30 +1193,23 @@ static irqreturn_t dp_display_irq_handler(int irq, void *dev_id)
> >>          return ret;
> >>   }
> >>
> >> -int dp_display_request_irq(struct msm_dp *dp_display)
> >> +static int dp_display_request_irq(struct dp_display_private *dp)
> >>   {
> >>          int rc = 0;
> >> -       struct dp_display_private *dp;
> >> -
> >> -       if (!dp_display) {
> >> -               DRM_ERROR("invalid input\n");
> >> -               return -EINVAL;
> >> -       }
> >> -
> >> -       dp = container_of(dp_display, struct dp_display_private, dp_display);
> >> +       struct device *dev = &dp->pdev->dev;
> >>
> >> -       dp->irq = irq_of_parse_and_map(dp->pdev->dev.of_node, 0);
> >>          if (!dp->irq) {
> > What is the point in this check?
> >
> >> -               DRM_ERROR("failed to get irq\n");
> >> -               return -EINVAL;
> >> +               dp->irq = platform_get_irq(dp->pdev, 0);
> >> +               if (!dp->irq) {
> >> +                       DRM_ERROR("failed to get irq\n");
> >> +                       return -EINVAL;
> >> +               }
> >>          }
> >>
> >> -       rc = devm_request_irq(dp_display->drm_dev->dev, dp->irq,
> >> -                       dp_display_irq_handler,
> >> +       rc = devm_request_irq(dev, dp->irq, dp_display_irq_handler,
> >>                          IRQF_TRIGGER_HIGH, "dp_display_isr", dp);
> >>          if (rc < 0) {
> >> -               DRM_ERROR("failed to request IRQ%u: %d\n",
> >> -                               dp->irq, rc);
> >> +               DRM_ERROR("failed to request IRQ%u: %d\n", dp->irq, rc);
> >>                  return rc;
> >>          }
> >>
> >> @@ -1287,6 +1280,10 @@ static int dp_display_probe(struct platform_device *pdev)
> >>
> >>          platform_set_drvdata(pdev, &dp->dp_display);
> >>
> >> +       rc = dp_display_request_irq(dp);
> >> +       if (rc)
> >> +               return rc;
> > This way the IRQ ends up being enabled in _probe. Are we ready to
> > handle it here? Is the DP device fully setup at this moment?
> >
> >> +
> >>          rc = component_add(&pdev->dev, &dp_display_comp_ops);
> >>          if (rc) {
> >>                  DRM_ERROR("component add failed, rc=%d\n", rc);
> >> @@ -1549,12 +1546,6 @@ int msm_dp_modeset_init(struct msm_dp *dp_display, struct drm_device *dev,
> >>
> >>          dp_priv = container_of(dp_display, struct dp_display_private, dp_display);
> >>
> >> -       ret = dp_display_request_irq(dp_display);
> >> -       if (ret) {
> >> -               DRM_ERROR("request_irq failed, ret=%d\n", ret);
> >> -               return ret;
> >> -       }
> >> -
> >>          ret = dp_display_get_next_bridge(dp_display);
> >>          if (ret)
> >>                  return ret;
> >> diff --git a/drivers/gpu/drm/msm/dp/dp_display.h b/drivers/gpu/drm/msm/dp/dp_display.h
> >> index 1e9415a..b3c08de 100644
> >> --- a/drivers/gpu/drm/msm/dp/dp_display.h
> >> +++ b/drivers/gpu/drm/msm/dp/dp_display.h
> >> @@ -35,7 +35,6 @@ struct msm_dp {
> >>   int dp_display_set_plugged_cb(struct msm_dp *dp_display,
> >>                  hdmi_codec_plugged_cb fn, struct device *codec_dev);
> >>   int dp_display_get_modes(struct msm_dp *dp_display);
> >> -int dp_display_request_irq(struct msm_dp *dp_display);
> >>   bool dp_display_check_video_test(struct msm_dp *dp_display);
> >>   int dp_display_get_test_bpp(struct msm_dp *dp_display);
> >>   void dp_display_signal_audio_start(struct msm_dp *dp_display);
> >> --
> >> 2.7.4
> >>
> >



-- 
With best wishes
Dmitry



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux