[RFC PATCH v2 5/9] drm/panel: nv3052c: Allow specifying registers per panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Panel initialization registers are per-display and not tied to the
controller itself. Different panels will specify their own registers.
Attach the sequences to the panel info struct so future panels
can specify their own sequences.

Signed-off-by: John Watts <contact@xxxxxxxxxx>
Reviewed-by: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
---
 .../gpu/drm/panel/panel-newvision-nv3052c.c   | 24 ++++++++++++-------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 307335d0f1fc..2b24c684a8ac 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -20,11 +20,18 @@
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
 
+struct nv3052c_reg {
+	u8 cmd;
+	u8 val;
+};
+
 struct nv3052c_panel_info {
 	const struct drm_display_mode *display_modes;
 	unsigned int num_modes;
 	u16 width_mm, height_mm;
 	u32 bus_format, bus_flags;
+	const struct nv3052c_reg *panel_regs;
+	int panel_regs_len;
 };
 
 struct nv3052c {
@@ -36,12 +43,7 @@ struct nv3052c {
 	struct gpio_desc *reset_gpio;
 };
 
-struct nv3052c_reg {
-	u8 cmd;
-	u8 val;
-};
-
-static const struct nv3052c_reg nv3052c_panel_regs[] = {
+static const struct nv3052c_reg ltk035c5444t_panel_regs[] = {
 	// EXTC Command set enable, select page 1
 	{ 0xff, 0x30 }, { 0xff, 0x52 }, { 0xff, 0x01 },
 	// Mostly unknown registers
@@ -244,6 +246,8 @@ static inline struct nv3052c *to_nv3052c(struct drm_panel *panel)
 static int nv3052c_prepare(struct drm_panel *panel)
 {
 	struct nv3052c *priv = to_nv3052c(panel);
+	const struct nv3052c_reg *panel_regs = priv->panel_info->panel_regs;
+	int panel_regs_len = priv->panel_info->panel_regs_len;
 	struct mipi_dbi *dbi = &priv->dbi;
 	unsigned int i;
 	int err;
@@ -260,9 +264,9 @@ static int nv3052c_prepare(struct drm_panel *panel)
 	gpiod_set_value_cansleep(priv->reset_gpio, 0);
 	msleep(150);
 
-	for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
-		err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
-				       nv3052c_panel_regs[i].val);
+	for (i = 0; i < panel_regs_len; i++) {
+		err = mipi_dbi_command(dbi, panel_regs[i].cmd,
+				       panel_regs[i].val);
 
 		if (err) {
 			dev_err(priv->dev, "Unable to set register: %d\n", err);
@@ -466,6 +470,8 @@ static const struct nv3052c_panel_info ltk035c5444t_panel_info = {
 	.height_mm = 64,
 	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+	.panel_regs = ltk035c5444t_panel_regs,
+	.panel_regs_len = ARRAY_SIZE(ltk035c5444t_panel_regs),
 };
 
 static const struct spi_device_id nv3052c_ids[] = {
-- 
2.42.0




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux