From: Martin Tsai <martin.tsai@xxxxxxx>
[ Upstream commit 6917b0b711713b9d84d7e0844e9aa613997a51b2 ]
[Why]
Panels show corruption with high refresh rate timings when
ss is enabled.
[How]
Read down-spread percentage from lut to adjust dprefclk.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@xxxxxxx>
Acked-by: Alex Hung <alex.hung@xxxxxxx>
Signed-off-by: Martin Tsai <martin.tsai@xxxxxxx>
Tested-by: Daniel Wheeler <daniel.wheeler@xxxxxxx>
Signed-off-by: Alex Deucher <alexander.deucher@xxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
.../dc/clk_mgr/dcn314/dcn314_clk_mgr.c | 33 +++++++++++++++++--
.../dc/clk_mgr/dcn314/dcn314_clk_mgr.h | 7 ++++
2 files changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
index 5cb44f838bde5..db1b15796e307 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.c
@@ -87,6 +87,14 @@ static const struct IP_BASE CLK_BASE = { { { { 0x00016C00, 0x02401800, 0, 0, 0,
#define CLK1_CLK_PLL_REQ__PllSpineDiv_MASK 0x0000F000L
#define CLK1_CLK_PLL_REQ__FbMult_frac_MASK 0xFFFF0000L
+#define regCLK1_CLK2_BYPASS_CNTL 0x029c
+#define regCLK1_CLK2_BYPASS_CNTL_BASE_IDX 0
+
+#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL__SHIFT 0x0
+#define CLK1_CLK2_BYPASS_CNTL__LK2_BYPASS_DIV__SHIFT 0x10
+#define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL_MASK 0x00000007L
+#define CLK1_CLK2_BYPASS_CNTL__LK2_BYPASS_DIV_MASK 0x000F0000L
+
#define REG(reg_name) \
(CLK_BASE.instance[0].segment[reg ## reg_name ## _BASE_IDX] + reg ## reg_name)
@@ -440,6 +448,11 @@ static DpmClocks314_t dummy_clocks;
static struct dcn314_watermarks dummy_wms = { 0 };
+static struct dcn314_ss_info_table ss_info_table = {
+ .ss_divider = 1000,
+ .ss_percentage = {0, 0, 375, 375, 375}
+};
+
static void dcn314_build_watermark_ranges(struct clk_bw_params *bw_params, struct dcn314_watermarks *table)
{
int i, num_valid_sets;
@@ -719,6 +732,20 @@ static struct clk_mgr_funcs dcn314_funcs = {
};
extern struct clk_mgr_funcs dcn3_fpga_funcs;
+static void dcn314_read_ss_info_from_lut(struct clk_mgr_internal *clk_mgr)
+{
+ uint32_t clock_source;
+
+ REG_GET(CLK1_CLK2_BYPASS_CNTL, CLK2_BYPASS_SEL, &clock_source);
+
+ clk_mgr->dprefclk_ss_percentage = ss_info_table.ss_percentage[clock_source];
+
+ if (clk_mgr->dprefclk_ss_percentage != 0) {
+ clk_mgr->ss_on_dprefclk = true;
+ clk_mgr->dprefclk_ss_divider = ss_info_table.ss_divider;
+ }
+}
+
void dcn314_clk_mgr_construct(
struct dc_context *ctx,
struct clk_mgr_dcn314 *clk_mgr,
@@ -791,9 +818,11 @@ void dcn314_clk_mgr_construct(
clk_mgr->base.base.dprefclk_khz = 600000;
clk_mgr->base.base.clks.ref_dtbclk_khz = 600000;
- dce_clock_read_ss_info(&clk_mgr->base);
+
+ dcn314_read_ss_info_from_lut(&clk_mgr->base);
/*if bios enabled SS, driver needs to adjust dtb clock, only enable with correct bios*/
- //clk_mgr->base.dccg->ref_dtbclk_khz = dce_adjust_dp_ref_freq_for_ss(clk_mgr_internal, clk_mgr->base.base.dprefclk_khz);
+ clk_mgr->base.base.dprefclk_khz =
+ dce_adjust_dp_ref_freq_for_ss(&clk_mgr->base, clk_mgr->base.base.dprefclk_khz);
clk_mgr->base.base.bw_params = &dcn314_bw_params;
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.h b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.h
index 171f84340eb2f..e0670dafe2600 100644
--- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.h
+++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn314/dcn314_clk_mgr.h
@@ -28,6 +28,8 @@
#define __DCN314_CLK_MGR_H__
#include "clk_mgr_internal.h"
+#define NUM_CLOCK_SOURCES 5
+
struct dcn314_watermarks;
struct dcn314_smu_watermark_set {
@@ -40,6 +42,11 @@ struct clk_mgr_dcn314 {
struct dcn314_smu_watermark_set smu_wm_set;
};
+struct dcn314_ss_info_table {
+ uint32_t ss_divider;
+ uint32_t ss_percentage[NUM_CLOCK_SOURCES];
+};
+
bool dcn314_are_clock_states_equal(struct dc_clocks *a,
struct dc_clocks *b);
--
2.40.1
