Acked-by: Anitha Chrisanthus <anitha.chrisanthus@xxxxxxxxx> > -----Original Message----- > From: Jim Cromie <jim.cromie@xxxxxxxxx> > Sent: Wednesday, September 6, 2023 12:02 PM > To: linux-kernel@xxxxxxxxxxxxxxx; dri-devel@xxxxxxxxxxxxxxxxxxxxx; amd- > gfx@xxxxxxxxxxxxxxxxxxxxx; intel-gvt-dev@xxxxxxxxxxxxxxxxxxxxx; intel- > gfx@xxxxxxxxxxxxxxxxxxxxx > Cc: daniel.vetter@xxxxxxxx; daniel@xxxxxxxx; Nikula, Jani > <jani.nikula@xxxxxxxxx>; ville.syrjala@xxxxxxxxxxxxxxx; > seanpaul@xxxxxxxxxxxx; robdclark@xxxxxxxxx; Jim Cromie > <jim.cromie@xxxxxxxxx>; Chrisanthus, Anitha > <anitha.chrisanthus@xxxxxxxxx>; Edmund Dea <edmund.j.dea@xxxxxxxxx>; > David Airlie <airlied@xxxxxxxxx> > Subject: [PATCH v3 2/5] drm/kmb: add trailing newlines to drm_dbg msgs > > By at least strong convention, a print-buffer's trailing newline says > "message complete, send it". The exception (no TNL, followed by a call > to pr_cont) proves the general rule. > > Most DRM.debug calls already comport with this: 207 DRM_DEV_DEBUG, > 1288 drm_dbg. Clean up the remainders, in maintainer sized chunks. > > No functional changes. > > Signed-off-by: Jim Cromie <jim.cromie@xxxxxxxxx> > --- > drivers/gpu/drm/kmb/kmb_crtc.c | 10 +++++----- > drivers/gpu/drm/kmb/kmb_plane.c | 6 +++--- > 2 files changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c > b/drivers/gpu/drm/kmb/kmb_crtc.c > index 647872f65bff..a58baf25322d 100644 > --- a/drivers/gpu/drm/kmb/kmb_crtc.c > +++ b/drivers/gpu/drm/kmb/kmb_crtc.c > @@ -94,7 +94,7 @@ static void kmb_crtc_set_mode(struct drm_crtc *crtc, > vm.hback_porch = 0; > vm.hsync_len = 28; > > - drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d > h-active=%d h-bp=%d h-fp=%d hsync-l=%d", > + drm_dbg(dev, "%s : %dactive height= %d vbp=%d vfp=%d vsync-w=%d > h-active=%d h-bp=%d h-fp=%d hsync-l=%d\n", > __func__, __LINE__, > m->crtc_vdisplay, vm.vback_porch, vm.vfront_porch, > vm.vsync_len, m->crtc_hdisplay, vm.hback_porch, > @@ -194,24 +194,24 @@ static enum drm_mode_status > int vfp = mode->vsync_start - mode->vdisplay; > > if (mode->vdisplay < KMB_CRTC_MAX_HEIGHT) { > - drm_dbg(dev, "height = %d less than %d", > + drm_dbg(dev, "height = %d less than %d\n", > mode->vdisplay, KMB_CRTC_MAX_HEIGHT); > return MODE_BAD_VVALUE; > } > if (mode->hdisplay < KMB_CRTC_MAX_WIDTH) { > - drm_dbg(dev, "width = %d less than %d", > + drm_dbg(dev, "width = %d less than %d\n", > mode->hdisplay, KMB_CRTC_MAX_WIDTH); > return MODE_BAD_HVALUE; > } > refresh = drm_mode_vrefresh(mode); > if (refresh < KMB_MIN_VREFRESH || refresh > KMB_MAX_VREFRESH) { > - drm_dbg(dev, "refresh = %d less than %d or greater than %d", > + drm_dbg(dev, "refresh = %d less than %d or greater than > %d\n", > refresh, KMB_MIN_VREFRESH, KMB_MAX_VREFRESH); > return MODE_BAD; > } > > if (vfp < KMB_CRTC_MIN_VFP) { > - drm_dbg(dev, "vfp = %d less than %d", vfp, > KMB_CRTC_MIN_VFP); > + drm_dbg(dev, "vfp = %d less than %d\n", vfp, > KMB_CRTC_MIN_VFP); > return MODE_BAD; > } > > diff --git a/drivers/gpu/drm/kmb/kmb_plane.c > b/drivers/gpu/drm/kmb/kmb_plane.c > index 9e0562aa2bcb..308bd1cb50c8 100644 > --- a/drivers/gpu/drm/kmb/kmb_plane.c > +++ b/drivers/gpu/drm/kmb/kmb_plane.c > @@ -78,7 +78,7 @@ static unsigned int check_pixel_format(struct drm_plane > *plane, u32 format) > * plane configuration is not supported. > */ > if (init_disp_cfg.format && init_disp_cfg.format != format) { > - drm_dbg(&kmb->drm, "Cannot change format after initial > plane configuration"); > + drm_dbg(&kmb->drm, "Cannot change format after initial > plane configuration\n"); > return -EINVAL; > } > for (i = 0; i < plane->format_count; i++) { > @@ -124,7 +124,7 @@ static int kmb_plane_atomic_check(struct drm_plane > *plane, > if ((init_disp_cfg.width && init_disp_cfg.height) && > (init_disp_cfg.width != fb->width || > init_disp_cfg.height != fb->height)) { > - drm_dbg(&kmb->drm, "Cannot change plane height or width > after initial configuration"); > + drm_dbg(&kmb->drm, "Cannot change plane height or width > after initial configuration\n"); > return -EINVAL; > } > can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY); > @@ -375,7 +375,7 @@ static void kmb_plane_atomic_update(struct > drm_plane *plane, > spin_lock_irq(&kmb->irq_lock); > if (kmb->kmb_under_flow || kmb->kmb_flush_done) { > spin_unlock_irq(&kmb->irq_lock); > - drm_dbg(&kmb->drm, "plane_update:underflow!!!! > returning"); > + drm_dbg(&kmb->drm, "plane_update:underflow!!!! > returning\n"); > return; > } > spin_unlock_irq(&kmb->irq_lock); > -- > 2.41.0