On 2023-08-28 04:20, Pekka Paalanen wrote: > On Fri, 25 Aug 2023 13:37:08 -0100 > Melissa Wen <mwen@xxxxxxxxxx> wrote: > >> On 08/22, Pekka Paalanen wrote: >>> On Thu, 10 Aug 2023 15:03:11 -0100 >>> Melissa Wen <mwen@xxxxxxxxxx> wrote: >>> >>>> dc->caps.color.mpc.gamut_remap says there is a post-blending color block >>>> for gamut remap matrix for DCN3 HW family and newer versions. However, >>>> those drivers still follow DCN10 programming that remap stream >>>> gamut_remap_matrix to DPP (pre-blending). >>> >>> That's ok only as long as CRTC degamma is pass-through. Blending itself >>> is a linear operation, so it doesn't matter if a matrix is applied to >>> the blending result or to all blending inputs. But you cannot move a >>> matrix operation to the other side of a non-linear operation, and you >>> cannot move a non-linear operation across blending. >> >> Oh, I'm not moving it, what I'm doing here is the opposite and fixing >> it. This patch puts each pre- and post-blending CTM in their right >> place, since we have the HW caps for it on DCN3+... Or are you just >> pointing out the implementation mistake on old driver versions? > > It's just the old mistake. > > I hope no-one complains, forcing you to revert this fix as a regression. > I'm worried this will break other OSes since its in DC and shared. I'll check with Kruno when he's back from vacation. But most likely this will be problematic. Worst case we can add a new "program_gamut_remap_actually_post_blending" (with a better name) function to HWSS, expose it in DC, and make sure amdgpu_dm never calls the old "program_gamut_remap". I hope nobody relies on the current (IMO broken) behavior on Linux. Harry > > Thanks, > pq > > >>>> To enable pre-blending and post-blending gamut_remap matrix supports at >>>> the same time, set stream gamut_remap to MPC and plane gamut_remap to >>>> DPP for DCN301 that support both. >>>> >>>> It was tested using IGT KMS color tests for DRM CRTC CTM property and it >>>> preserves test results. >>>> >>>> Signed-off-by: Melissa Wen <mwen@xxxxxxxxxx> >>>> --- >>>> .../drm/amd/display/dc/dcn30/dcn30_hwseq.c | 37 +++++++++++++++++++ >>>> .../drm/amd/display/dc/dcn30/dcn30_hwseq.h | 3 ++ >>>> .../drm/amd/display/dc/dcn301/dcn301_init.c | 2 +- >>>> 3 files changed, 41 insertions(+), 1 deletion(-)
