Unlike SST, MST can support multiple displays connected to a single connector. However, this also means that if the DisplayPort link to the top-level MST branch device becomes unstable, then every single branch device has an unstable link. Since there are multiple downstream ports per connector, setting the link status of the parent mstb's port to BAD is not enough. All of the downstream mstb ports must also have their link status set to BAD. This aligns to how the DP link status logic in DRM works. We notify userspace that all of the mstb ports need retraining and apply new lower bandwidth constraints to all future atomic commits on the topology that follow. Since any driver supporting MST needs to figure out which connectors live downstream on an MST topology and update their link status in order to retrain MST links properly, we add the drm_dp_set_mst_topology_link_status() helper. This helper simply marks the link status of all connectors living in that topology as bad. We will make use of this helper in i915 later in this series. Credit: this patch is a refactor of Lyude Pual's original patch: https://patchwork.kernel.org/project/dri-devel/patch/20180308232421.14049-5-lyude@xxxxxxxxxx/ Signed-off-by: Gil Dekel <gildekel@xxxxxxxxxxxx> --- drivers/gpu/drm/display/drm_dp_mst_topology.c | 39 +++++++++++++++++++ include/drm/display/drm_dp_mst_helper.h | 3 ++ 2 files changed, 42 insertions(+) diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c index ed96cfcfa304..17cbadfb6ccb 100644 --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c @@ -3566,6 +3566,45 @@ int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr, } EXPORT_SYMBOL(drm_dp_get_vc_payload_bw); +/** + * drm_dp_set_mst_topology_link_status() - set all downstream MST ports' link status + * @mgr: MST topology manager to set state for + * @status: The new status to set the MST topology to + * + * Set all downstream ports' link-status within the topology to the given status. + */ +void drm_dp_set_mst_topology_link_status(struct drm_dp_mst_topology_mgr *mgr, + enum drm_link_status status) +{ + struct drm_dp_mst_port *port; + struct drm_dp_mst_branch *rmstb; + struct drm_dp_mst_branch *mstb = + drm_dp_mst_topology_get_mstb_validated(mgr, mgr->mst_primary); + + list_for_each_entry_reverse(port, &mstb->ports, next) { + struct drm_connector *connector = port->connector; + + if (connector) { + mutex_lock(&connector->dev->mode_config.mutex); + drm_dbg_kms( + connector->dev, + "[MST-CONNECTOR:%d:%s] link status %d -> %d\n", + connector->base.id, connector->name, + connector->state->link_status, status); + connector->state->link_status = status; + mutex_unlock(&connector->dev->mode_config.mutex); + } + + rmstb = drm_dp_mst_topology_get_mstb_validated(mstb->mgr, + port->mstb); + if (rmstb) { + drm_dp_set_mst_topology_link_status(rmstb->mgr, status); + drm_dp_mst_topology_put_mstb(rmstb); + } + } +} +EXPORT_SYMBOL(drm_dp_set_mst_topology_link_status); + /** * drm_dp_read_mst_cap() - check whether or not a sink supports MST * @aux: The DP AUX channel to use diff --git a/include/drm/display/drm_dp_mst_helper.h b/include/drm/display/drm_dp_mst_helper.h index ed5c9660563c..855d488bf364 100644 --- a/include/drm/display/drm_dp_mst_helper.h +++ b/include/drm/display/drm_dp_mst_helper.h @@ -832,6 +832,9 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, int drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr, int link_rate, int link_lane_count); +void drm_dp_set_mst_topology_link_status(struct drm_dp_mst_topology_mgr *mgr, + enum drm_link_status status); + int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc); void drm_dp_mst_update_slots(struct drm_dp_mst_topology_state *mst_state, uint8_t link_encoding_cap); -- Gil Dekel, Software Engineer, Google / ChromeOS Display and Graphics
