drm_dp_mst_atomic_check_mgr() should check for BW limitation starting from sink ports continuing towards the root port, so that drivers can use the @failing_port returned to resolve a BW overallocation in an ideal way. For instance from streams A,B,C in a topology A,B going through @failing_port and C not going through it, a BW overallocation of A,B due to a limit of the port must be resolved first before considering the limits of other ports closer to the root port. This way can avoid reducing the BW of stream C unnecessarily due to a BW limit closer to the root port. Based on the above swap the order of the BW check for the root port and the check for all the ports downstream of it (the latter going through the topology already in the sink->root port direction). Cc: Lyude Paul <lyude@xxxxxxxxxx> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx Signed-off-by: Imre Deak <imre.deak@xxxxxxxxx> --- drivers/gpu/drm/display/drm_dp_mst_topology.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c index a32da72bb05c5..12a13885145d3 100644 --- a/drivers/gpu/drm/display/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c @@ -5449,9 +5449,13 @@ EXPORT_SYMBOL(drm_dp_mst_atomic_enable_dsc); * %-ENOSPC, if the new state is invalid, because of BW limitation * @failing_port is set to: * - The non-root port where a BW limit check failed + * with all the ports downstream of @failing_port passing + * the BW limit check. * The returned port pointer is valid until at least * one payload downstream of it exists. * - %NULL if the BW limit check failed at the root port + * with all the ports downstream of the root port passing + * the BW limit check. * %-EINVAL, if the new state is invalid, because the root port has too many * payloads. */ @@ -5467,17 +5471,16 @@ int drm_dp_mst_atomic_check_mgr(struct drm_atomic_state *state, if (!mgr->mst_state) return 0; - ret = drm_dp_mst_atomic_check_payload_alloc_limits(mgr, mst_state); - if (ret) - return ret; - mutex_lock(&mgr->lock); ret = drm_dp_mst_atomic_check_mstb_bw_limit(mgr->mst_primary, mst_state, failing_port); mutex_unlock(&mgr->lock); - return ret < 0 ? ret : 0; + if (ret < 0) + return ret; + + return drm_dp_mst_atomic_check_payload_alloc_limits(mgr, mst_state); } EXPORT_SYMBOL(drm_dp_mst_atomic_check_mgr); -- 2.37.2
