On Mon, Aug 07, 2023 at 02:33:00PM +0100, Diogo Ivo wrote: > Hello, > > These patches add support for the JDI LPM102A188A display panel, > found in the Google Pixel C. > > Patch 1 adds the DT bindings for the panel. > > Patch 2 adds the panel driver, which is based on the downstream > kernel driver published by Google and developed by Sean Paul. > > Patches 3-5 add DT nodes for the regulator, backlight controller and > display panel. > > The first version of this patch series can be found at: > https://lore.kernel.org/all/20220929170502.1034040-1-diogo.ivo@xxxxxxxxxxxxxxxxxx/ > > The first submission of v2 can be found at: > https://lore.kernel.org/all/20221025153746.101278-1-diogo.ivo@xxxxxxxxxxxxxxxxxx/ > > Changes in v2: > - Patch 1: remove touchscreen reset gpio property > - Patch 2: clear register based on its value rather than a DT property > - Patch 3: tune backlight delay values > - Patch 4: add generic node names, remove underscores > > Changes in v3: > - Patch 1: add Reviewed-by > - Patch 2: fix error handling, remove enabled/prepared booleans, add > dc/dc setting > - Patches 3-5: Split previous patch 3 into three different patches, > each adding a separate node > - removed previous patch 2 pertaining to Tegra DSI reset as it was upstreamed > > Diogo Ivo (5): > dt-bindings: display: Add bindings for JDI LPM102A188A > drm/panel: Add driver for JDI LPM102A188A > arm64: dts: smaug: Add DSI/CSI regulator > arm64: dts: smaug: Add backlight node > arm64: dts: smaug: Add display panel node I've picked up patches 3-5 into the Tegra tree and I assume the other two will go in through drm-misc? Thierry
Attachment:
signature.asc
Description: PGP signature