Refactor code to separate functions for eDP and DP for computing pipe_bpp/compressed bpp when DSC is involved. This will help to optimize the link configuration for DP later. v2: Fix checkpatch warning. Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@xxxxxxxxx> --- drivers/gpu/drm/i915/display/intel_dp.c | 191 ++++++++++++++++-------- 1 file changed, 126 insertions(+), 65 deletions(-) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index fd321b314f91..f4870c9b0db6 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -1696,6 +1696,115 @@ bool is_dsc_pipe_bpp_sufficient(struct drm_i915_private *i915, int pipe_bpp) return pipe_bpp >= intel_dp_dsc_min_src_input_bpc(i915) * 3; } +static +int intel_dp_force_dsc_pipe_bpp(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int forced_bpp; + + if (!intel_dp->force_dsc_bpc) + return 0; + + forced_bpp = intel_dp->force_dsc_bpc * 3; + + if (is_dsc_pipe_bpp_sufficient(i915, forced_bpp)) { + drm_dbg_kms(&i915->drm, "Input DSC BPC forced to %d\n", intel_dp->force_dsc_bpc); + return forced_bpp; + } + + drm_dbg_kms(&i915->drm, "Cannot force DSC BPC:%d, due to DSC BPC limits\n", + intel_dp->force_dsc_bpc); + + return 0; +} + +static int intel_dp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + struct drm_connector_state *conn_state, + struct link_config_limits *limits, + int timeslots) +{ + const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode; + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u16 output_bpp, dsc_max_compressed_bpp = 0; + int forced_bpp, pipe_bpp; + + forced_bpp = intel_dp_force_dsc_pipe_bpp(intel_dp); + + if (forced_bpp) { + pipe_bpp = forced_bpp; + } else { + pipe_bpp = intel_dp_dsc_compute_max_bpp(intel_dp, conn_state->max_requested_bpc); + + if (!is_dsc_pipe_bpp_sufficient(i915, pipe_bpp)) { + drm_dbg_kms(&i915->drm, + "Computed BPC less than min supported by source for DSC\n"); + return -EINVAL; + } + } + /* + * For now enable DSC for max link rate, max lane count. + * Optimize this later for the minimum possible link rate/lane count + * with DSC enabled for the requested mode. + */ + pipe_config->port_clock = limits->max_rate; + pipe_config->lane_count = limits->max_lane_count; + dsc_max_compressed_bpp = intel_dp_dsc_get_max_compressed_bpp(i915, + pipe_config->port_clock, + pipe_config->lane_count, + adjusted_mode->crtc_clock, + adjusted_mode->crtc_hdisplay, + pipe_config->bigjoiner_pipes, + pipe_config->output_format, + pipe_bpp, + timeslots); + if (!dsc_max_compressed_bpp) { + drm_dbg_kms(&i915->drm, "Compressed BPP not supported\n"); + return -EINVAL; + } + + output_bpp = intel_dp_output_bpp(pipe_config->output_format, pipe_bpp); + + pipe_config->dsc.compressed_bpp = min_t(u16, dsc_max_compressed_bpp, output_bpp); + + pipe_config->pipe_bpp = pipe_bpp; + + return 0; +} + +static int intel_edp_dsc_compute_pipe_bpp(struct intel_dp *intel_dp, + struct intel_crtc_state *pipe_config, + struct drm_connector_state *conn_state, + struct link_config_limits *limits) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int pipe_bpp, forced_bpp; + + forced_bpp = intel_dp_force_dsc_pipe_bpp(intel_dp); + + if (forced_bpp) { + pipe_bpp = forced_bpp; + } else { + /* For eDP use max bpp that can be supported with DSC. */ + pipe_bpp = intel_dp_dsc_compute_max_bpp(intel_dp, + conn_state->max_requested_bpc); + if (!is_dsc_pipe_bpp_sufficient(i915, pipe_bpp)) { + drm_dbg_kms(&i915->drm, + "Computed BPC less than min supported by source for DSC\n"); + return -EINVAL; + } + } + pipe_config->port_clock = limits->max_rate; + pipe_config->lane_count = limits->max_lane_count; + pipe_config->dsc.compressed_bpp = + min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4, + pipe_bpp); + + pipe_config->pipe_bpp = pipe_bpp; + + return 0; +} + int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, struct intel_crtc_state *pipe_config, struct drm_connector_state *conn_state, @@ -1718,44 +1827,28 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, if (!intel_dp_dsc_supports_format(intel_dp, pipe_config->output_format)) return -EINVAL; + /* + * compute pipe bpp is set to false for DP MST DSC case + * and compressed_bpp is calculated same time once + * vpci timeslots are allocated, because overall bpp + * calculation procedure is bit different for MST case. + */ if (compute_pipe_bpp) { - int pipe_bpp; - int forced_bpp = intel_dp->force_dsc_bpc * 3; - - if (forced_bpp && is_dsc_pipe_bpp_sufficient(dev_priv, forced_bpp)) { - pipe_bpp = forced_bpp; - drm_dbg_kms(&dev_priv->drm, "Input DSC BPC forced to %d\n", - intel_dp->force_dsc_bpc); - } else { - drm_WARN(&dev_priv->drm, forced_bpp, - "Cannot force DSC BPC:%d, due to DSC BPC limits\n", - intel_dp->force_dsc_bpc); - - pipe_bpp = intel_dp_dsc_compute_max_bpp(intel_dp, - conn_state->max_requested_bpc); - - if (!is_dsc_pipe_bpp_sufficient(dev_priv, pipe_bpp)) { - drm_dbg_kms(&dev_priv->drm, - "Computed BPC less than min supported by source for DSC\n"); - return -EINVAL; - } + if (intel_dp_is_edp(intel_dp)) + ret = intel_edp_dsc_compute_pipe_bpp(intel_dp, pipe_config, + conn_state, limits); + else + ret = intel_dp_dsc_compute_pipe_bpp(intel_dp, pipe_config, + conn_state, limits, timeslots); + if (ret) { + drm_dbg_kms(&dev_priv->drm, + "No Valid pipe bpp for given mode ret = %d\n", ret); + return ret; } - - pipe_config->pipe_bpp = pipe_bpp; } - /* - * For now enable DSC for max link rate, max lane count. - * Optimize this later for the minimum possible link rate/lane count - * with DSC enabled for the requested mode. - */ - pipe_config->port_clock = limits->max_rate; - pipe_config->lane_count = limits->max_lane_count; - + /* Calculate Slice count */ if (intel_dp_is_edp(intel_dp)) { - pipe_config->dsc.compressed_bpp = - min_t(u16, drm_edp_dsc_sink_output_bpp(intel_dp->dsc_dpcd) >> 4, - pipe_config->pipe_bpp); pipe_config->dsc.slice_count = drm_dp_dsc_sink_max_slice_count(intel_dp->dsc_dpcd, true); @@ -1765,26 +1858,8 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, return -EINVAL; } } else { - u16 dsc_max_compressed_bpp = 0; u8 dsc_dp_slice_count; - if (compute_pipe_bpp) { - dsc_max_compressed_bpp = - intel_dp_dsc_get_max_compressed_bpp(dev_priv, - pipe_config->port_clock, - pipe_config->lane_count, - adjusted_mode->crtc_clock, - adjusted_mode->crtc_hdisplay, - pipe_config->bigjoiner_pipes, - pipe_config->output_format, - pipe_config->pipe_bpp, - timeslots); - if (!dsc_max_compressed_bpp) { - drm_dbg_kms(&dev_priv->drm, - "Compressed BPP not supported\n"); - return -EINVAL; - } - } dsc_dp_slice_count = intel_dp_dsc_get_slice_count(intel_dp, adjusted_mode->crtc_clock, @@ -1796,20 +1871,6 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp, return -EINVAL; } - /* - * compute pipe bpp is set to false for DP MST DSC case - * and compressed_bpp is calculated same time once - * vpci timeslots are allocated, because overall bpp - * calculation procedure is bit different for MST case. - */ - if (compute_pipe_bpp) { - u16 output_bpp = intel_dp_output_bpp(pipe_config->output_format, - pipe_config->pipe_bpp); - - pipe_config->dsc.compressed_bpp = min_t(u16, - dsc_max_compressed_bpp, - output_bpp); - } pipe_config->dsc.slice_count = dsc_dp_slice_count; } /* -- 2.40.1