-----邮件原件----- 发件人: Liu Lucas/刘保柱 发送时间: 2023年8月4日 15:47 收件人: 'Liviu Dudau' <liviu.dudau@xxxxxxx> 抄送: Huang Menghui/黄梦辉 <menghui.huang@xxxxxxxxxxxx>; airlied@xxxxxxxxx; daniel@xxxxxxxx 主题: 回复: 回复: 回复: 回复: [PATCH] drm/komeda: drop all currently held locks if deadlock happens Hi Liviu, I have resend that patch and cc to the dri-devel mailing list which public information about it can be looked up now . Please try to deal with this patch when you are available. Best regards, -----邮件原件----- 发件人: Liviu Dudau <liviu.dudau@xxxxxxx> 发送时间: 2023年8月4日 6:24 收件人: Liu Lucas/刘保柱 <lucas.liu@xxxxxxxxxxxx> 抄送: Huang Menghui/黄梦辉 <menghui.huang@xxxxxxxxxxxx>; airlied@xxxxxxxxx; daniel@xxxxxxxx 主题: Re: 回复: 回复: 回复: [PATCH] drm/komeda: drop all currently held locks if deadlock happens On Thu, Aug 03, 2023 at 01:47:08AM +0000, Liu Lucas/刘保柱 wrote: > Hi Liviu, Hi Liu, > I resend my patch using the email address of "huangmenghui" and add the Signed-off-by of "huangmenghui". Could you please check whether it meets the requirement? When trying to apply the patch to drm-misc-next using the dim tool I've realised that you have never Cc-ed dri-devel mailing list. Because of that I don't have any public record of your patch that I can link into. If you look at the commits in drivers/drm, they all have a "Link" in the commit message that leads to a patchwork page where you can see the patch (and the discussions in the thread). You can resend the patch Cc-ing dri-devel, however I'm about to go on holiday. I will probably check my emails from time to time but I cannot promise that I'm going to merge the patch until I'm back on 28th of August. Sorry about the delays. Best regards, Liviu > > Best regards, > > -----邮件原件----- > 发件人: Liviu Dudau <liviu.dudau@xxxxxxx> > 发送时间: 2023年8月2日 0:30 > 收件人: Liu Lucas/刘保柱 <lucas.liu@xxxxxxxxxxxx> > 抄送: Huang Menghui/黄梦辉 <menghui.huang@xxxxxxxxxxxx>; airlied@xxxxxxxxx; > daniel@xxxxxxxx > 主题: Re: 回复: 回复: [PATCH] drm/komeda: drop all currently held locks if > deadlock happens > > On Tue, Aug 01, 2023 at 01:42:58PM +0000, Liu Lucas/刘保柱 wrote: > > Hi Liviu, > > > > The author of this patch is me, but it needs to add the sign-off-by tag of huang menghui, as follows: > > Signed-off-by: baozhu.liu <lucas.liu@xxxxxxxxxxxx> > > Signed-off-by: menghui.huang<menghui.huang@xxxxxxxxxxxx> > > Can I add two "S-o-b" at the same time? > > Yes. > > > In that case, am I still the author of this patch? > > Yes, you are, as long as you keep the "From: " line at the top. > > Also, the order is correct. First S-o-b is from author (you), next S-o-b is from the sender of the email (Huang). > > Best regards, > Liviu > > > > > Best regards, > > -----邮件原件----- > > 发件人: Liviu Dudau <liviu.dudau@xxxxxxx> > > 发送时间: 2023年8月1日 18:58 > > 收件人: Liu Lucas/刘保柱 <lucas.liu@xxxxxxxxxxxx> > > 抄送: Huang Menghui/黄梦辉 <menghui.huang@xxxxxxxxxxxx>; > > airlied@xxxxxxxxx; daniel@xxxxxxxx > > 主题: Re: 回复: [PATCH] drm/komeda: drop all currently held locks if > > deadlock happens > > > > On Tue, Aug 01, 2023 at 09:39:22AM +0000, Liu Lucas/刘保柱 wrote: > > > Hi Liviu Dudau , > > > > Hi Liu, > > > > > > > > Since there was some problem with my email account when git > > > send-email was sent, I borrowed huang menghui's email address to send it, so there was no need to add his Signed-off-by tag. > > > > I'm afraid that's not how 'git am' works and I also need to put a link to patchwork that will also show a different name for the submitter. If you look into Documentation/process/submitting-patches.rst, it does state under "Sign your work - the Developer's Certificate of Origin": > > > > Any further SoBs (Signed-off-by:'s) following the author's SoB are from > > people handling and transporting the patch, but were not involved in its > > development. SoB chains should reflect the **real** route a patch took > > as it was propagated to the maintainers and ultimately to Linus, with > > the first SoB entry signalling primary authorship of a single author. > > > > > > So if you have used Huang's email, you need his S-o-b. Alternatively, resend the patch from your email address. > > > > Best regards, > > Liviu > > > > > > > > Thank you for the recognition of this patch. > > > > > > -----邮件原件----- > > > 发件人: Liviu Dudau <liviu.dudau@xxxxxxx> > > > 发送时间: 2023年8月1日 17:31 > > > 收件人: Huang Menghui/黄梦辉 <menghui.huang@xxxxxxxxxxxx> > > > 抄送: airlied@xxxxxxxxx; daniel@xxxxxxxx; Liu Lucas/刘保柱 > > > <lucas.liu@xxxxxxxxxxxx> > > > 主题: Re: [PATCH] drm/komeda: drop all currently held locks if > > > deadlock happens > > > > > > On Tue, Aug 01, 2023 at 05:03:55PM +0800, menghui.huang wrote: > > > > From: "baozhu.liu" <lucas.liu@xxxxxxxxxxxx> > > > > > > > > If komeda_pipeline_unbound_components() returns -EDEADLK, it > > > > means that a deadlock happened in the locking context. > > > > Currently, komeda is not dealing with the deadlock > > > > properly,producing the following output when CONFIG_DEBUG_WW_MUTEX_SLOWPATH is enabled: > > > > > > > > ------------[ cut here ]------------ > > > > [ 26.103984] WARNING: CPU: 2 PID: 345 at drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c:1248 > > > > komeda_release_unclaimed_resources+0x13c/0x170 > > > > [ 26.117453] Modules linked in: > > > > [ 26.120511] CPU: 2 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 > > > > [ 26.131374] Hardware name: Siengine Se1000 Evaluation board (DT) > > > > [ 26.137379] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) > > > > [ 26.143385] pc : komeda_release_unclaimed_resources+0x13c/0x170 > > > > [ 26.149301] lr : komeda_release_unclaimed_resources+0xbc/0x170 > > > > [ 26.155130] sp : ffff800017b8b8d0 > > > > [ 26.158442] pmr_save: 000000e0 > > > > [ 26.161493] x29: ffff800017b8b8d0 x28: ffff000cf2f96200 > > > > [ 26.166805] x27: ffff000c8f5a8800 x26: 0000000000000000 > > > > [ 26.172116] x25: 0000000000000038 x24: ffff8000116a0140 > > > > [ 26.177428] x23: 0000000000000038 x22: ffff000cf2f96200 > > > > [ 26.182739] x21: ffff000cfc300300 x20: ffff000c8ab77080 > > > > [ 26.188051] x19: 0000000000000003 x18: 0000000000000000 > > > > [ 26.193362] x17: 0000000000000000 x16: 0000000000000000 > > > > [ 26.198672] x15: b400e638f738ba38 x14: 0000000000000000 > > > > [ 26.203983] x13: 0000000106400a00 x12: 0000000000000000 > > > > [ 26.209294] x11: 0000000000000000 x10: 0000000000000000 > > > > [ 26.214604] x9 : ffff800012f80000 x8 : ffff000ca3308000 > > > > [ 26.219915] x7 : 0000000ff3000000 x6 : ffff80001084034c > > > > [ 26.225226] x5 : ffff800017b8bc40 x4 : 000000000000000f > > > > [ 26.230536] x3 : ffff000ca3308000 x2 : 0000000000000000 > > > > [ 26.235847] x1 : 0000000000000000 x0 : ffffffffffffffdd > > > > [ 26.241158] Call trace: > > > > [ 26.243604] komeda_release_unclaimed_resources+0x13c/0x170 > > > > [ 26.249175] komeda_crtc_atomic_check+0x68/0xf0 > > > > [ 26.253706] drm_atomic_helper_check_planes+0x138/0x1f4 > > > > [ 26.258929] komeda_kms_check+0x284/0x36c > > > > [ 26.262939] drm_atomic_check_only+0x40c/0x714 > > > > [ 26.267381] drm_atomic_nonblocking_commit+0x1c/0x60 > > > > [ 26.272344] drm_mode_atomic_ioctl+0xa3c/0xb8c > > > > [ 26.276787] drm_ioctl_kernel+0xc4/0x120 > > > > [ 26.280708] drm_ioctl+0x268/0x534 > > > > [ 26.284109] __arm64_sys_ioctl+0xa8/0xf0 > > > > [ 26.288030] el0_svc_common.constprop.0+0x80/0x240 > > > > [ 26.292817] do_el0_svc+0x24/0x90 > > > > [ 26.296132] el0_svc+0x20/0x30 > > > > [ 26.299185] el0_sync_handler+0xe8/0xf0 > > > > [ 26.303018] el0_sync+0x1a4/0x1c0 > > > > [ 26.306330] irq event stamp: 0 > > > > [ 26.309384] hardirqs last enabled at (0): [<0000000000000000>] 0x0 > > > > [ 26.315650] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c > > > > [ 26.323825] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c > > > > [ 26.331997] softirqs last disabled at (0): [<0000000000000000>] 0x0 > > > > [ 26.338261] ---[ end trace 20ae984fa860184a ]--- > > > > [ 26.343021] ------------[ cut here ]------------ > > > > [ 26.347646] WARNING: CPU: 3 PID: 345 at drivers/gpu/drm/drm_modeset_lock.c:228 drm_modeset_drop_locks+0x84/0x90 > > > > [ 26.357727] Modules linked in: > > > > [ 26.360783] CPU: 3 PID: 345 Comm: composer@2.1-se Kdump: loaded Tainted: G W 5.10.110-SE-SDK1.8-dirty #16 > > > > [ 26.371645] Hardware name: Siengine Se1000 Evaluation board (DT) > > > > [ 26.377647] pstate: 20400009 (nzCv daif +PAN -UAO -TCO BTYPE=--) > > > > [ 26.383649] pc : drm_modeset_drop_locks+0x84/0x90 > > > > [ 26.388351] lr : drm_mode_atomic_ioctl+0x860/0xb8c > > > > [ 26.393137] sp : ffff800017b8bb10 > > > > [ 26.396447] pmr_save: 000000e0 > > > > [ 26.399497] x29: ffff800017b8bb10 x28: 0000000000000001 > > > > [ 26.404807] x27: 0000000000000038 x26: 0000000000000002 > > > > [ 26.410115] x25: ffff000cecbefa00 x24: ffff000cf2f96200 > > > > [ 26.415423] x23: 0000000000000001 x22: 0000000000000018 > > > > [ 26.420731] x21: 0000000000000001 x20: ffff800017b8bc10 > > > > [ 26.426039] x19: 0000000000000000 x18: 0000000000000000 > > > > [ 26.431347] x17: 0000000002e8bf2c x16: 0000000002e94c6b > > > > [ 26.436655] x15: 0000000002ea48b9 x14: ffff8000121f0300 > > > > [ 26.441963] x13: 0000000002ee2ca8 x12: ffff80001129cae0 > > > > [ 26.447272] x11: ffff800012435000 x10: ffff000ed46b5e88 > > > > [ 26.452580] x9 : ffff000c9935e600 x8 : 0000000000000000 > > > > [ 26.457888] x7 : 000000008020001e x6 : 000000008020001f > > > > [ 26.463196] x5 : ffff80001085fbe0 x4 : fffffe0033a59f20 > > > > [ 26.468504] x3 : 000000008020001e x2 : 0000000000000000 > > > > [ 26.473813] x1 : 0000000000000000 x0 : ffff000c8f596090 > > > > [ 26.479122] Call trace: > > > > [ 26.481566] drm_modeset_drop_locks+0x84/0x90 > > > > [ 26.485918] drm_mode_atomic_ioctl+0x860/0xb8c > > > > [ 26.490359] drm_ioctl_kernel+0xc4/0x120 > > > > [ 26.494278] drm_ioctl+0x268/0x534 > > > > [ 26.497677] __arm64_sys_ioctl+0xa8/0xf0 > > > > [ 26.501598] el0_svc_common.constprop.0+0x80/0x240 > > > > [ 26.506384] do_el0_svc+0x24/0x90 > > > > [ 26.509697] el0_svc+0x20/0x30 > > > > [ 26.512748] el0_sync_handler+0xe8/0xf0 > > > > [ 26.516580] el0_sync+0x1a4/0x1c0 > > > > [ 26.519891] irq event stamp: 0 > > > > [ 26.522943] hardirqs last enabled at (0): [<0000000000000000>] 0x0 > > > > [ 26.529207] hardirqs last disabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c > > > > [ 26.537379] softirqs last enabled at (0): [<ffff800010056d34>] copy_process+0x5d0/0x183c > > > > [ 26.545550] softirqs last disabled at (0): [<0000000000000000>] 0x0 > > > > [ 26.551812] ---[ end trace 20ae984fa860184b ]--- > > > > > > > > According to the call trace information, it can be located to be > > > > WARN_ON(IS_ERR(c_st)) in the komeda_pipeline_unbound_components function; Then follow the function. > > > > komeda_pipeline_unbound_components > > > > -> komeda_component_get_state_and_set_user > > > > -> komeda_pipeline_get_state_and_set_crtc > > > > -> komeda_pipeline_get_state > > > > ->drm_atomic_get_private_obj_state > > > > -> drm_atomic_get_private_obj_state > > > > -> drm_modeset_lock > > > > > > > > komeda_pipeline_unbound_components > > > > -> komeda_component_get_state_and_set_user > > > > -> komeda_component_get_state > > > > -> drm_atomic_get_private_obj_state > > > > -> drm_modeset_lock > > > > > > > > ret = drm_modeset_lock(&obj->lock, state->acquire_ctx); if (ret) > > > > return ERR_PTR(ret); > > > > Here it return -EDEADLK. > > > > > > > > deal with the deadlock as suggested by [1], using the function > > > > drm_modeset_backoff(). > > > > [1] > > > > https://docs.kernel.org/gpu/drm-kms.html?highlight=kms#kms-locki > > > > ng > > > > > > > > Therefore, handling this problem can be solved by adding return > > > > -EDEADLK back to the drm_modeset_backoff processing flow in the > > > > drm_mode_atomic_ioctl function. > > > > > > > > Signed-off-by: baozhu.liu <lucas.liu@xxxxxxxxxxxx> > > > > > > Hi Menghui, > > > > > > Can you add your Signed-off-by tag as well? With that updated, I will pull the patch into drm-misc-next by Friday. > > > > > > Best regards, > > > Liviu > > > > > > > Reviewed-by: Liviu Dudau <liviu.dudau@xxxxxxx> > > > > --- > > > > .../gpu/drm/arm/display/komeda/komeda_pipeline_state.c | 9 ++++++--- > > > > 1 file changed, 6 insertions(+), 3 deletions(-) > > > > > > > > diff --git > > > > a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c > > > > b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c > > > > index 3276a3e82c62..916f2c36bf2f 100644 > > > > --- a/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c > > > > +++ b/drivers/gpu/drm/arm/display/komeda/komeda_pipeline_state.c > > > > @@ -1223,7 +1223,7 @@ int komeda_build_display_data_flow(struct komeda_crtc *kcrtc, > > > > return 0; > > > > } > > > > > > > > -static void > > > > +static int > > > > komeda_pipeline_unbound_components(struct komeda_pipeline *pipe, > > > > struct komeda_pipeline_state *new) { @@ -1243,8 > > > > +1243,12 @@ komeda_pipeline_unbound_components(struct > > > > +komeda_pipeline *pipe, > > > > c = komeda_pipeline_get_component(pipe, id); > > > > c_st = komeda_component_get_state_and_set_user(c, > > > > drm_st, NULL, new->crtc); > > > > + if (PTR_ERR(c_st) == -EDEADLK) > > > > + return -EDEADLK; > > > > WARN_ON(IS_ERR(c_st)); > > > > } > > > > + > > > > + return 0; > > > > } > > > > > > > > /* release unclaimed pipeline resource */ @@ -1266,9 +1270,8 @@ > > > > int komeda_release_unclaimed_resources(struct komeda_pipeline *pipe, > > > > if (WARN_ON(IS_ERR_OR_NULL(st))) > > > > return -EINVAL; > > > > > > > > - komeda_pipeline_unbound_components(pipe, st); > > > > + return komeda_pipeline_unbound_components(pipe, st); > > > > > > > > - return 0; > > > > } > > > > > > > > /* Since standalone disabled components must be disabled > > > > separately and in the > > > > -- > > > > 2.17.1 > > > > > > > > > > -- > > > ==================== > > > | I would like to | > > > | fix the world, | > > > | but they're not | > > > | giving me the | > > > \ source code! / > > > --------------- > > > ¯\_(ツ)_/¯ > > > > -- > > ==================== > > | I would like to | > > | fix the world, | > > | but they're not | > > | giving me the | > > \ source code! / > > --------------- > > ¯\_(ツ)_/¯ > > -- > ==================== > | I would like to | > | fix the world, | > | but they're not | > | giving me the | > \ source code! / > --------------- > ¯\_(ツ)_/¯ -- ==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ¯\_(ツ)_/¯