Re: [PATCH v2 2/3] drm/panel: sitronix-st7789v: add panel orientation support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Neil,

On 8/4/23 10:40, Neil Armstrong wrote:
> Hi,
> 
> On 03/08/2023 22:13, Michael Riesch wrote:
>> Determine the orientation of the display based on the device tree and
>> propagate it.
>>
>> Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
>> Signed-off-by: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
>> ---
>>   drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 18 ++++++++++++++++++
>>   1 file changed, 18 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>> b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>> index c7cbfe6ca82c..6575f07d49e3 100644
>> --- a/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>> +++ b/drivers/gpu/drm/panel/panel-sitronix-st7789v.c
>> @@ -116,6 +116,7 @@ struct st7789v {
>>       struct spi_device *spi;
>>       struct gpio_desc *reset;
>>       struct regulator *power;
>> +    enum drm_panel_orientation orientation;
>>   };
>>     enum st7789v_prefix {
>> @@ -170,6 +171,7 @@ static const struct drm_display_mode default_mode = {
>>   static int st7789v_get_modes(struct drm_panel *panel,
>>                    struct drm_connector *connector)
>>   {
>> +    struct st7789v *ctx = panel_to_st7789v(panel);
>>       struct drm_display_mode *mode;
>>         mode = drm_mode_duplicate(connector->dev, &default_mode);
>> @@ -188,9 +190,22 @@ static int st7789v_get_modes(struct drm_panel
>> *panel,
>>       connector->display_info.width_mm = 61;
>>       connector->display_info.height_mm = 103;
>>   +    /*
>> +     * TODO: Remove once all drm drivers call
>> +     * drm_connector_set_orientation_from_panel()
>> +     */
>> +    drm_connector_set_panel_orientation(connector, ctx->orientation);
>> +
>>       return 1;
>>   }
>>   +static enum drm_panel_orientation st7789v_get_orientation(struct
>> drm_panel *p)
>> +{
>> +    struct st7789v *ctx = panel_to_st7789v(p);
>> +
>> +    return ctx->orientation;
>> +}
>> +
>>   static int st7789v_prepare(struct drm_panel *panel)
>>   {
>>       struct st7789v *ctx = panel_to_st7789v(panel);
>> @@ -349,6 +364,7 @@ static const struct drm_panel_funcs
>> st7789v_drm_funcs = {
>>       .disable = st7789v_disable,
>>       .enable    = st7789v_enable,
>>       .get_modes = st7789v_get_modes,
>> +    .get_orientation = st7789v_get_orientation,
>>       .prepare = st7789v_prepare,
>>       .unprepare = st7789v_unprepare,
>>   };
>> @@ -382,6 +398,8 @@ static int st7789v_probe(struct spi_device *spi)
>>       if (ret)
>>           return ret;
>>   +    of_drm_get_panel_orientation(spi->dev.of_node, &ctx->orientation);
>> +
>>       drm_panel_add(&ctx->panel);
>>         return 0;
>>
> 
> This patch doesn't apply clean on drm-misc-next, could you rebase and
> resend ?

Sure! v3 is out.

Best regards,
Michael

> 
> Thanks,
> Neil



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux