On 04/08/2023 08:11, Sandor Yu wrote:
The ELD (EDID-Like Data) is not updated when the HDMI cable
is plugged into different HDMI monitors.
This is because the EDID is not updated in the HDMI HPD function.
As a result, the ELD data remains unchanged and may not reflect
the capabilities of the newly connected HDMI sink device.
To address this issue, the handle_plugged_change function should move to
the bridge_atomic_enable and bridge_atomic_disable functions.
Make sure the EDID is properly updated before updating ELD.
Signed-off-by: Sandor Yu <Sandor.yu@xxxxxxx>
---
v2:
- Add the variable of last_connector_result back to driver.
It will only be used to initialize audio codec jack status when audio codec driver probe.
---
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 +++---------
1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
index aa51c61a78c7..963050de42c3 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
@@ -2463,15 +2463,7 @@ static enum drm_connector_status dw_hdmi_detect(struct dw_hdmi *hdmi)
enum drm_connector_status result;
result = hdmi->phy.ops->read_hpd(hdmi, hdmi->phy.data);
-
- mutex_lock(&hdmi->mutex);
- if (result != hdmi->last_connector_result) {
- dev_dbg(hdmi->dev, "read_hpd result: %d", result);
- handle_plugged_change(hdmi,
- result == connector_status_connected);
- hdmi->last_connector_result = result;
- }
- mutex_unlock(&hdmi->mutex);
+ hdmi->last_connector_result = result;
return result;
}
@@ -2971,6 +2963,7 @@ static void dw_hdmi_bridge_atomic_disable(struct drm_bridge *bridge,
hdmi->curr_conn = NULL;
dw_hdmi_update_power(hdmi);
dw_hdmi_update_phy_mask(hdmi);
+ handle_plugged_change(hdmi, false);
mutex_unlock(&hdmi->mutex);
}
@@ -2989,6 +2982,7 @@ static void dw_hdmi_bridge_atomic_enable(struct drm_bridge *bridge,
hdmi->curr_conn = connector;
dw_hdmi_update_power(hdmi);
dw_hdmi_update_phy_mask(hdmi);
+ handle_plugged_change(hdmi, true);
mutex_unlock(&hdmi->mutex);
}
Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
