Re: [PATCH 10/20] drm/i915/dp: Add functions to get min/max src input bpc with DSC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 8/2/2023 5:35 PM, Lisovskiy, Stanislav wrote:
On Fri, Jul 28, 2023 at 09:41:40AM +0530, Ankit Nautiyal wrote:
Separate out functions for getting maximum and minimum input BPC based
on platforms, when DSC is used.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@xxxxxxxxx>
---
  drivers/gpu/drm/i915/display/intel_dp.c | 38 +++++++++++++++++++------
  1 file changed, 30 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 7ec8a478e000..f41de126a8d3 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -1535,6 +1535,18 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
  	return -EINVAL;
  }
+static
+u8 intel_dp_dsc_max_src_input_bpc(struct drm_i915_private *i915)
+{
+	/* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
+	if (DISPLAY_VER(i915) >= 12)
+		return 12;
+	if (DISPLAY_VER(i915) == 11)
+		return 10;
+
+	return 0;
+}
+
  int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
  {
  	struct drm_i915_private *i915 = dp_to_i915(intel_dp);
@@ -1542,11 +1554,12 @@ int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 max_req_bpc)
  	u8 dsc_bpc[3] = {0};
  	u8 dsc_max_bpc;
- /* Max DSC Input BPC for ICL is 10 and for TGL+ is 12 */
-	if (DISPLAY_VER(i915) >= 12)
-		dsc_max_bpc = min_t(u8, 12, max_req_bpc);
-	else
-		dsc_max_bpc = min_t(u8, 10, max_req_bpc);
+	dsc_max_bpc = intel_dp_dsc_max_src_input_bpc(i915);
+
+	if (!dsc_max_bpc)
+		return dsc_max_bpc;
+
+	dsc_max_bpc = min_t(u8, dsc_max_bpc, max_req_bpc);
num_bpc = drm_dp_dsc_sink_supported_input_bpcs(intel_dp->dsc_dpcd,
  						       dsc_bpc);
@@ -1674,6 +1687,16 @@ static bool intel_dp_dsc_supports_format(struct intel_dp *intel_dp,
  	return drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd, sink_dsc_format);
  }
+static
+u8 intel_dp_dsc_min_src_input_bpc(struct drm_i915_private *i915)
+{
+	/* Min DSC Input BPC for ICL+ is 8 */
+	if (DISPLAY_VER(i915) >= 11)
+		return 8;
+
+	return 0;
So does it mean that for anything below gen 11, there is no limit at all?
Also it means that the condition below will never be executed for gen <= 11.

Hmm. Bspec says min bpc is 8 for DSC, so idea is to have min bpc as 8 when DSC is used.

This is supposed to be called only if DSC is supported, so perhaps HAS_DSC can be used?

return HAS_DSC(dev_priv) ? 8 : 0;


Regards,

Ankit


Stan

+}
+
  int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
  				struct intel_crtc_state *pipe_config,
  				struct drm_connector_state *conn_state,
@@ -1707,10 +1730,9 @@ int intel_dp_dsc_compute_config(struct intel_dp *intel_dp,
  		pipe_bpp = pipe_config->pipe_bpp;
  	}
- /* Min Input BPC for ICL+ is 8 */
-	if (pipe_bpp < 8 * 3) {
+	if (pipe_bpp < intel_dp_dsc_min_src_input_bpc(dev_priv) * 3) {
  		drm_dbg_kms(&dev_priv->drm,
-			    "No DSC support for less than 8bpc\n");
+			    "Computed BPC less than min supported by source for DSC\n");
  		return -EINVAL;
  	}
--
2.40.1




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux