Re: [PATCH 2/2] drm/panel-simple: Add Innolux G156HCE-L01 panel entry

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/3/23 17:06, Luca Ceresoli wrote:
Hi Marek,

On Thu, 3 Aug 2023 16:25:37 +0200
Marek Vasut <marex@xxxxxxx> wrote:

On 8/3/23 16:23, Luca Ceresoli wrote:
Hi Marek,

Hi,

On Mon, 31 Jul 2023 23:02:58 +0200
Marek Vasut <marex@xxxxxxx> wrote:
Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].

Interesting, I'm bringing up this exact panel right now and found your
patch.
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.

Using 70.93 MHz here does not show any flickering. I even tried going
in the opposite direction and set 70 MHz, and to use different
backlight settings, all without any flickering.

Do you think you might be using a defective device? Would you have a
chance of testing another sample?

I have literally one such display.

Which SoC do you use (and if applicable, which bridge) ?

The panel is driven by the DSI-2 output of a i.MX8MP through a TI
SN65DSI84 bridge.

I use the LT9211 , so I wonder whether this might be another Lontium specific oddity.



[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux