Re: [PATCH v2 6/9] drm: atmel_hlcdc: Add support for XLCDC in atmel LCD driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/07/23 8:10 am, Manikandan Muralidharan wrote:
> - XLCDC in SAM9X7 has different sets of registers and additional
> configuration bits when compared to previous HLCDC IP. Read/write
> operation on the controller registers is now separated using the
> XLCDC status flag.
> 	- HEO scaling, window resampling, Alpha blending, YUV-to-RGB
> conversion in XLCDC is derived and handled using additional
> configuration bits and registers.
> 	- Writing one to the Enable fields of each layer in LCD_ATTRE
> is required to reflect the values set in Configuration, FBA, Enable
> registers of each layer
> 
> Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
> Co-developed-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@xxxxxxxxxxxxx>
> Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE@xxxxxxxxxxxxx>
> Co-developed-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
> Signed-off-by: Durai Manickam KR <durai.manickamkr@xxxxxxxxxxxxx>
> ---
>   .../gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c    |  32 +-
>   .../gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c   | 337 +++++++++++++++---
>   2 files changed, 312 insertions(+), 57 deletions(-)
> 
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> index 58184cd6ab0b..27f86cea8bff 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c
> @@ -139,10 +139,10 @@ static void atmel_hlcdc_crtc_mode_set_nofb(struct drm_crtc *c)
>   	state = drm_crtc_state_to_atmel_hlcdc_crtc_state(c->state);
>   	cfg = state->output_mode << 8;
>   
> -	if (adj->flags & DRM_MODE_FLAG_NVSYNC)
> +	if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NVSYNC))

Instead of de-referencing the value of is_xlcdc flag multiple times, can 
we have it assigned to a local variable instead to make it more readable 
and avoid multiple memory accesses ?

>   		cfg |= ATMEL_HLCDC_VSPOL;
>   
> -	if (adj->flags & DRM_MODE_FLAG_NHSYNC)
> +	if (!crtc->dc->desc->is_xlcdc && (adj->flags & DRM_MODE_FLAG_NHSYNC))
>   		cfg |= ATMEL_HLCDC_HSPOL;
>   
>   	regmap_update_bits(regmap, ATMEL_HLCDC_CFG(5),
> @@ -177,6 +177,20 @@ static void atmel_hlcdc_crtc_atomic_disable(struct drm_crtc *c,
>   
>   	pm_runtime_get_sync(dev->dev);
>   
> +	if (crtc->dc->desc->is_xlcdc) {
> +		regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_CM);
> +		if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> +					      !(status & ATMEL_XLCDC_CM), 10,
> +					      0))
> +			cpu_relax();

cpu_relax() is not required here and at other places below since the 
above function yields the cpu anyway,remove them.

> +
> +		regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_XLCDC_SD);
> +		if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> +					      status & ATMEL_XLCDC_SD, 10,
> +					      0))
> +			cpu_relax();
> +	}
> +
>   	regmap_write(regmap, ATMEL_HLCDC_DIS, ATMEL_HLCDC_DISP);
>   	while (!regmap_read(regmap, ATMEL_HLCDC_SR, &status) &&
>   	       (status & ATMEL_HLCDC_DISP))
> @@ -231,6 +245,20 @@ static void atmel_hlcdc_crtc_atomic_enable(struct drm_crtc *c,
>   	       !(status & ATMEL_HLCDC_DISP))
>   		cpu_relax();
>   
> +	if (crtc->dc->desc->is_xlcdc) {
> +		regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_CM);
> +		if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> +					      status & ATMEL_XLCDC_CM, 10,
> +					      0))
> +			cpu_relax();
> +
> +		regmap_write(regmap, ATMEL_HLCDC_EN, ATMEL_XLCDC_SD);
> +		if (!regmap_read_poll_timeout(regmap, ATMEL_HLCDC_SR, status,
> +					      !(status & ATMEL_XLCDC_SD), 10,
> +					      0))
> +			cpu_relax();
> +	}
> +
>   	pm_runtime_put_sync(dev->dev);
>   
>   }
> diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> index daa508504f47..81f103b1a51f 100644
> --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> @@ -330,11 +330,59 @@ static void atmel_hlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
>   								     yfactor));
>   }
>   
> +static void atmel_xlcdc_plane_setup_scaler(struct atmel_hlcdc_plane *plane,
> +					   struct atmel_hlcdc_plane_state *state)
> +{
> +	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> +	u32 xfactor, yfactor;
> +
> +	if (!desc->layout.scaler_config)
> +		return;
> +
> +	if (state->crtc_w == state->src_w && state->crtc_h == state->src_h) {
> +		atmel_hlcdc_layer_write_cfg(&plane->layer,
> +					    desc->layout.scaler_config, 0);
> +		return;
> +	}
> +
> +	/* xfactor = round[(2^20 * XMEMSIZE)/XSIZE)] */
> +	xfactor = (1048576 * state->src_w) / state->crtc_w;

Use the left shift operator to represent 2^20. The comment says we need 
to round off the result of this math operation but the actual code 
doesn't implement this.Look for kernel macro's that does this.Shouldn't 
the variables xfactor & yfactor below be declared as u64 ?

> +
> +	/* yfactor = round[(2^20 * YMEMSIZE)/YSIZE)] */
> +	yfactor = (1048576 * state->src_h) / state->crtc_h;
> +
> +	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config,
> +				    ATMEL_XLCDC_LAYER_VSCALER_LUMA_ENABLE |
> +				    ATMEL_XLCDC_LAYER_VSCALER_CHROMA_ENABLE |
> +				    ATMEL_XLCDC_LAYER_HSCALER_LUMA_ENABLE |
> +				    ATMEL_XLCDC_LAYER_HSCALER_CHROMA_ENABLE);
> +
> +	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 1,
> +				    yfactor);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 3,
> +				    xfactor);
> +
> +	/* As per YCbCr window resampling configuration */
> +	if (state->base.fb->format->format == DRM_FORMAT_YUV420) {
> +		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
> +					    yfactor / 2);
> +		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
> +					    xfactor / 2);
> +	} else {
> +		/* As per ARGB window resampling configuration */
> +		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 2,
> +					    yfactor);
> +		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.scaler_config + 4,
> +					    xfactor);
> +	}
> +}
> +
>   static void
>   atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
>   				      struct atmel_hlcdc_plane_state *state)
>   {
>   	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> +	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>   
>   	if (desc->layout.size)
>   		atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.size,
> @@ -352,7 +400,10 @@ atmel_hlcdc_plane_update_pos_and_size(struct atmel_hlcdc_plane *plane,
>   					ATMEL_HLCDC_LAYER_POS(state->crtc_x,
>   							      state->crtc_y));
>   
> -	atmel_hlcdc_plane_setup_scaler(plane, state);
> +	if (dc->desc->is_xlcdc)
> +		atmel_xlcdc_plane_setup_scaler(plane, state);
> +	else
> +		atmel_hlcdc_plane_setup_scaler(plane, state);
>   }
>   
>   static void
> @@ -393,6 +444,40 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
>   				    cfg);
>   }
>   
> +static void
> +atmel_xlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> +					  struct atmel_hlcdc_plane_state *state)
> +{
> +	unsigned int cfg;
> +	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> +	const struct drm_format_info *format = state->base.fb->format;
> +
> +	atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_XLCDC_LAYER_DMA_CFG,
> +				    ATMEL_HLCDC_LAYER_DMA_BLEN_INCR16 | state->ahb_id);
> +
> +	cfg = ATMEL_XLCDC_LAYER_DMA | ATMEL_XLCDC_LAYER_REP;
> +
> +	if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
> +		/*
> +		 * Alpha Blending bits specific to SAM9X7 SoC
> +		 */
> +		cfg |= ATMEL_XLCDC_LAYER_SFACTC_A0_MULT_AS |
> +		       ATMEL_XLCDC_LAYER_SFACTA_ONE |
> +		       ATMEL_XLCDC_LAYER_DFACTC_M_A0_MULT_AS |
> +		       ATMEL_XLCDC_LAYER_DFACTA_ONE;
> +		if (format->has_alpha)
> +			cfg |= ATMEL_XLCDC_LAYER_A0(0xff);
> +		else
> +			cfg |= ATMEL_XLCDC_LAYER_A0(state->base.alpha);
> +	}
> +
> +	if (state->disc_h && state->disc_w)
> +		cfg |= ATMEL_XLCDC_LAYER_DISCEN;
> +
> +	atmel_hlcdc_layer_write_cfg(&plane->layer, desc->layout.general_config,
> +				    cfg);
> +}
> +
>   static void atmel_hlcdc_plane_update_format(struct atmel_hlcdc_plane *plane,
>   					struct atmel_hlcdc_plane_state *state)
>   {
> @@ -437,36 +522,55 @@ static void atmel_hlcdc_plane_update_clut(struct atmel_hlcdc_plane *plane,
>   	}
>   }
>   
> +static void update_hlcdc_buffers(struct atmel_hlcdc_plane *plane,
> +				 struct atmel_hlcdc_plane_state *state, u32 sr, int i)
> +{
> +	atmel_hlcdc_layer_write_reg(&plane->layer,
> +				    ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
> +				    state->dscrs[i]->self);
> +
> +	if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
> +		atmel_hlcdc_layer_write_reg(&plane->layer,
> +					    ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
> +					    state->dscrs[i]->addr);
> +		atmel_hlcdc_layer_write_reg(&plane->layer,
> +					    ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
> +					    state->dscrs[i]->ctrl);
> +		atmel_hlcdc_layer_write_reg(&plane->layer,
> +					    ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
> +					    state->dscrs[i]->self);
> +	}
> +}
> +
> +static void update_xlcdc_buffers(struct atmel_hlcdc_plane *plane,
> +				 struct atmel_hlcdc_plane_state *state, int i)
> +{
> +	atmel_hlcdc_layer_write_reg(&plane->layer,
> +				    ATMEL_XLCDC_LAYER_PLANE_ADDR(i),
> +				    state->dscrs[i]->addr);
> +}
> +
>   static void atmel_hlcdc_plane_update_buffers(struct atmel_hlcdc_plane *plane,
> -					struct atmel_hlcdc_plane_state *state)
> +					     struct atmel_hlcdc_plane_state *state)
>   {
>   	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> +	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>   	struct drm_framebuffer *fb = state->base.fb;
>   	u32 sr;
>   	int i;
>   
> -	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> +	if (!dc->desc->is_xlcdc)
> +		sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
>   
>   	for (i = 0; i < state->nplanes; i++) {
>   		struct drm_gem_dma_object *gem = drm_fb_dma_get_gem_obj(fb, i);
>   
>   		state->dscrs[i]->addr = gem->dma_addr + state->offsets[i];
>   
> -		atmel_hlcdc_layer_write_reg(&plane->layer,
> -					    ATMEL_HLCDC_LAYER_PLANE_HEAD(i),
> -					    state->dscrs[i]->self);
> -
> -		if (!(sr & ATMEL_HLCDC_LAYER_EN)) {
> -			atmel_hlcdc_layer_write_reg(&plane->layer,
> -					ATMEL_HLCDC_LAYER_PLANE_ADDR(i),
> -					state->dscrs[i]->addr);
> -			atmel_hlcdc_layer_write_reg(&plane->layer,
> -					ATMEL_HLCDC_LAYER_PLANE_CTRL(i),
> -					state->dscrs[i]->ctrl);
> -			atmel_hlcdc_layer_write_reg(&plane->layer,
> -					ATMEL_HLCDC_LAYER_PLANE_NEXT(i),
> -					state->dscrs[i]->self);
> -		}
> +		if (dc->desc->is_xlcdc)
> +			update_xlcdc_buffers(plane, state, i);
> +		else
> +			update_hlcdc_buffers(plane, state, sr, i);
>   
>   		if (desc->layout.xstride[i])
>   			atmel_hlcdc_layer_write_cfg(&plane->layer,
> @@ -712,11 +816,8 @@ static int atmel_hlcdc_plane_atomic_check(struct drm_plane *p,
>   	return 0;
>   }
>   
> -static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> -					     struct drm_atomic_state *state)
> +static void hlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
>   {
> -	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> -
>   	/* Disable interrupts */
>   	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IDR,
>   				    0xffffffff);
> @@ -731,6 +832,72 @@ static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
>   	atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>   }
>   
> +static void xlcdc_atomic_disable(struct atmel_hlcdc_plane *plane)
> +{
> +	/* Disable interrupts */
> +	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IDR,
> +				    0xffffffff);
> +
> +	/* Disable the layer */
> +	atmel_hlcdc_layer_write_reg(&plane->layer,
> +				    ATMEL_XLCDC_LAYER_ENR, 0);
> +
> +	/* Clear all pending interrupts */
> +	atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
> +}
> +
> +static void atmel_hlcdc_plane_atomic_disable(struct drm_plane *p,
> +					     struct drm_atomic_state *state)
> +{
> +	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
> +	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> +
> +	if (dc->desc->is_xlcdc)
> +		xlcdc_atomic_disable(plane);
> +	else
> +		hlcdc_atomic_disable(plane);
> +}
> +
> +static void hlcdc_atomic_update(struct atmel_hlcdc_plane *plane)
> +{
> +	u32 sr;
> +
> +	/* Enable the overrun interrupts. */
> +	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
> +				    ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
> +				    ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
> +				    ATMEL_HLCDC_LAYER_OVR_IRQ(2));
> +
> +	/* Apply the new config at the next SOF event. */
> +	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> +	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
> +				    ATMEL_HLCDC_LAYER_UPDATE |
> +				    (sr & ATMEL_HLCDC_LAYER_EN ?
> +				    ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
> +}
> +
> +static void xlcdc_atomic_update(struct atmel_hlcdc_plane *plane,
> +				struct atmel_hlcdc_dc *dc)
> +{
> +	/* Enable the overrun interrupts. */
> +	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_IER,
> +				    ATMEL_XLCDC_LAYER_OVR_IRQ(0) |
> +				    ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
> +				    ATMEL_XLCDC_LAYER_OVR_IRQ(2));
> +
> +	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_XLCDC_LAYER_ENR,
> +				    ATMEL_XLCDC_LAYER_EN);
> +
> +	/*
> +	 * Updating XLCDC_xxxCFGx, XLCDC_xxxFBA and XLCDC_xxxEN,
> +	 * (where xxx indicates each layer) requires writing one to the
> +	 * Update Attribute field for each layer in LCDC_ATTRE register for SAM9X7.
> +	 */
> +	regmap_write(dc->hlcdc->regmap, ATMEL_XLCDC_ATTRE, ATMEL_XLCDC_BASE_UPDATE |
> +		     ATMEL_XLCDC_OVR1_UPDATE | ATMEL_XLCDC_OVR3_UPDATE |
> +		     ATMEL_XLCDC_HEO_UPDATE);
> +}
> +
>   static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
>   					    struct drm_atomic_state *state)
>   {
> @@ -739,7 +906,7 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
>   	struct atmel_hlcdc_plane *plane = drm_plane_to_atmel_hlcdc_plane(p);
>   	struct atmel_hlcdc_plane_state *hstate =
>   			drm_plane_state_to_atmel_hlcdc_plane_state(new_s);
> -	u32 sr;
> +	struct atmel_hlcdc_dc *dc = p->dev->dev_private;
>   
>   	if (!new_s->crtc || !new_s->fb)
>   		return;
> @@ -750,29 +917,73 @@ static void atmel_hlcdc_plane_atomic_update(struct drm_plane *p,
>   	}
>   
>   	atmel_hlcdc_plane_update_pos_and_size(plane, hstate);
> -	atmel_hlcdc_plane_update_general_settings(plane, hstate);
> +	if (dc->desc->is_xlcdc)
> +		atmel_xlcdc_plane_update_general_settings(plane, hstate);
> +	else
> +		atmel_hlcdc_plane_update_general_settings(plane, hstate);
>   	atmel_hlcdc_plane_update_format(plane, hstate);
>   	atmel_hlcdc_plane_update_clut(plane, hstate);
>   	atmel_hlcdc_plane_update_buffers(plane, hstate);
>   	atmel_hlcdc_plane_update_disc_area(plane, hstate);
>   
> -	/* Enable the overrun interrupts. */
> -	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_IER,
> -				    ATMEL_HLCDC_LAYER_OVR_IRQ(0) |
> -				    ATMEL_HLCDC_LAYER_OVR_IRQ(1) |
> -				    ATMEL_HLCDC_LAYER_OVR_IRQ(2));
> +	if (dc->desc->is_xlcdc)
> +		xlcdc_atomic_update(plane, dc);
> +	else
> +		hlcdc_atomic_update(plane);
> +}
>   
> -	/* Apply the new config at the next SOF event. */
> -	sr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHSR);
> -	atmel_hlcdc_layer_write_reg(&plane->layer, ATMEL_HLCDC_LAYER_CHER,
> -			ATMEL_HLCDC_LAYER_UPDATE |
> -			(sr & ATMEL_HLCDC_LAYER_EN ?
> -			 ATMEL_HLCDC_LAYER_A2Q : ATMEL_HLCDC_LAYER_EN));
> +static void hlcdc_csc_init(struct atmel_hlcdc_plane *plane,
> +			   const struct atmel_hlcdc_layer_desc *desc)
> +{
> +	/*
> +	 * TODO: declare a "yuv-to-rgb-conv-factors" property to let
> +	 * userspace modify these factors (using a BLOB property ?).
> +	 */
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc,
> +				    0x4c900091);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 1,
> +				    0x7a5f5090);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 2,
> +				    0x40040890);
> +}
> +
> +static void xlcdc_csc_init(struct atmel_hlcdc_plane *plane,
> +			   const struct atmel_hlcdc_layer_desc *desc)
> +{
> +	/*
> +	 * yuv-to-rgb-conv-factors are now defined from LCDC_HEOCFG16 to
> +	 * LCDC_HEOCFG21 registers in SAM9X7.
> +	 */
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc,
> +				    0x00000488);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 1,
> +				    0x00000648);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 2,
> +				    0x1EA00480);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 3,
> +				    0x00001D28);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 4,
> +				    0x08100480);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 5,
> +				    0x00000000);
> +	atmel_hlcdc_layer_write_cfg(&plane->layer,
> +				    desc->layout.csc + 6,
> +				    0x00000007);
>   }
>   

Both the above functions can be made more readable/easier to maintain by 
having the configs in an array and just loop through them.

>   static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
>   {
>   	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> +	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
>   
>   	if (desc->type == ATMEL_HLCDC_OVERLAY_LAYER ||
>   	    desc->type == ATMEL_HLCDC_CURSOR_LAYER) {
> @@ -796,31 +1007,19 @@ static int atmel_hlcdc_plane_init_properties(struct atmel_hlcdc_plane *plane)
>   			return ret;
>   	}
>   
> -	if (desc->layout.csc) {
> -		/*
> -		 * TODO: decare a "yuv-to-rgb-conv-factors" property to let
> -		 * userspace modify these factors (using a BLOB property ?).
> -		 */
> -		atmel_hlcdc_layer_write_cfg(&plane->layer,
> -					    desc->layout.csc,
> -					    0x4c900091);
> -		atmel_hlcdc_layer_write_cfg(&plane->layer,
> -					    desc->layout.csc + 1,
> -					    0x7a5f5090);
> -		atmel_hlcdc_layer_write_cfg(&plane->layer,
> -					    desc->layout.csc + 2,
> -					    0x40040890);
> -	}

Same as above.

> +	if (dc->desc->is_xlcdc && desc->layout.csc)
> +		xlcdc_csc_init(plane, desc);
> +	else
> +		if (desc->layout.csc)
> +			hlcdc_csc_init(plane, desc);
>   
>   	return 0;
>   }
>   
> -void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> +void hlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
> +		   const struct atmel_hlcdc_layer_desc *desc)
>   {
> -	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> -	u32 isr;
> -
> -	isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
> +	u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_HLCDC_LAYER_ISR);
>   
>   	/*
>   	 * There's not much we can do in case of overrun except informing
> @@ -834,6 +1033,34 @@ void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
>   			desc->name);
>   }
>   
> +void xlcdc_irq_dbg(struct atmel_hlcdc_plane *plane,
> +		   const struct atmel_hlcdc_layer_desc *desc)
> +{
> +	u32 isr = atmel_hlcdc_layer_read_reg(&plane->layer, ATMEL_XLCDC_LAYER_ISR);
> +
> +	/*
> +	 * There's not much we can do in case of overrun except informing
> +	 * the user. However, we are in interrupt context here, hence the
> +	 * use of dev_dbg().
> +	 */
> +	if (isr &
> +	    (ATMEL_XLCDC_LAYER_OVR_IRQ(0) | ATMEL_XLCDC_LAYER_OVR_IRQ(1) |
> +	     ATMEL_XLCDC_LAYER_OVR_IRQ(2)))
> +		dev_dbg(plane->base.dev->dev, "overrun on plane %s\n",
> +			desc->name);

use pr_warn() instead.

> +}
> +
> +void atmel_hlcdc_plane_irq(struct atmel_hlcdc_plane *plane)
> +{
> +	const struct atmel_hlcdc_layer_desc *desc = plane->layer.desc;
> +	struct atmel_hlcdc_dc *dc = plane->base.dev->dev_private;
> +
> +	if (dc->desc->is_xlcdc)
> +		xlcdc_irq_dbg(plane, desc);
> +	else
> +		hlcdc_irq_dbg(plane, desc);
> +}
> +
>   static const struct drm_plane_helper_funcs atmel_hlcdc_layer_plane_helper_funcs = {
>   	.atomic_check = atmel_hlcdc_plane_atomic_check,
>   	.atomic_update = atmel_hlcdc_plane_atomic_update,




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux