On 7/24/23 08:56, Otto Pflüger wrote: > When multiple displays are connected to the same SPI bus, the data/command > switch is sometimes considered part of the bus and is shared among the > displays. > > This series adds the GPIO_FLAGS_BIT_NONEXCLUSIVE flag for this GPIO and > SPI bus locking to the panel-mipi-dbi/drm_mipi_dbi drivers to support > this hardware setup. > > --- Thanks, applied to drm-misc-next. Noralf. > Changes in v3: > - add comment and remove unnecessary line break as suggested by Noralf > Changes in v2: > - fix uses of mipi_dbi_spi_transfer outside drm_mipi_dbi.c (errors > reported by kernel test robot) > - remove the is_locked argument introduced in v1 which was always set to > true > > Otto Pflüger (2): > drm/mipi-dbi: Lock SPI bus before setting D/C GPIO > drm/tiny: panel-mipi-dbi: Allow sharing the D/C GPIO > > drivers/gpu/drm/drm_mipi_dbi.c | 17 +++++++++++++---- > drivers/gpu/drm/tiny/ili9225.c | 7 ++++++- > drivers/gpu/drm/tiny/ili9486.c | 4 ++++ > drivers/gpu/drm/tiny/panel-mipi-dbi.c | 3 ++- > 4 files changed, 25 insertions(+), 6 deletions(-) > > > base-commit: ae867bc97b713121b2a7f5fcac68378a0774739b
