Re: [PATCH 2/4] drm/bridge-connector: handle subconnector types

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/07/2023 02:49, Dmitry Baryshkov wrote:
If the created connector type supports subconnector type property,
create and attach corresponding it. The default subtype value is 0,
which maps to the DRM_MODE_SUBCONNECTOR_Unknown type.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
  drivers/gpu/drm/drm_bridge_connector.c | 33 +++++++++++++++++++++++++-
  include/drm/drm_bridge.h               |  4 ++++
  2 files changed, 36 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c
index 07b5930b1282..a7b92f0d2430 100644
--- a/drivers/gpu/drm/drm_bridge_connector.c
+++ b/drivers/gpu/drm/drm_bridge_connector.c
@@ -329,7 +329,9 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
  	struct drm_connector *connector;
  	struct i2c_adapter *ddc = NULL;
  	struct drm_bridge *bridge, *panel_bridge = NULL;
+	enum drm_mode_subconnector subconnector;
  	int connector_type;
+	int ret;
bridge_connector = kzalloc(sizeof(*bridge_connector), GFP_KERNEL);
  	if (!bridge_connector)
@@ -365,8 +367,10 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
  		if (bridge->ops & DRM_BRIDGE_OP_MODES)
  			bridge_connector->bridge_modes = bridge;
- if (!drm_bridge_get_next_bridge(bridge))
+		if (!drm_bridge_get_next_bridge(bridge)) {
  			connector_type = bridge->type;
+			subconnector = bridge->subtype;
+		}
#ifdef CONFIG_OF
  		if (!drm_bridge_get_next_bridge(bridge) &&
@@ -399,6 +403,33 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
  	if (panel_bridge)
  		drm_panel_bridge_set_orientation(connector, panel_bridge);
+ if (connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
+		drm_connector_attach_dp_subconnector_property(connector, subconnector);
+	} else if (connector_type == DRM_MODE_CONNECTOR_DVII) {
+		ret = drm_mode_create_dvi_i_properties(drm);
+		if (ret)
+			return ERR_PTR(ret);
+
+		drm_object_attach_property(&connector->base,
+					   drm->mode_config.dvi_i_subconnector_property,
+					   subconnector);
+	} else if (connector_type == DRM_MODE_CONNECTOR_TV) {
+		ret = drm_mode_create_tv_properties(drm,
+						    BIT(DRM_MODE_TV_MODE_NTSC) |
+						    BIT(DRM_MODE_TV_MODE_NTSC_443) |
+						    BIT(DRM_MODE_TV_MODE_NTSC_J) |
+						    BIT(DRM_MODE_TV_MODE_PAL) |
+						    BIT(DRM_MODE_TV_MODE_PAL_M) |
+						    BIT(DRM_MODE_TV_MODE_PAL_N) |
+						    BIT(DRM_MODE_TV_MODE_SECAM));
+		if (ret)
+			return ERR_PTR(ret);

I don't think this is right, this should be called from the appropriate encoder
device depending on the analog tv mode capabilities.


+
+		drm_object_attach_property(&connector->base,
+					   drm->mode_config.tv_subconnector_property,
+					   subconnector);

Here, only add the property if drm->mode_config.tv_subconnector_property exists,
and perhaps add a warning if not.

AFAIK same for DRM_MODE_CONNECTOR_DVII.

+	}
+
  	return connector;
  }
  EXPORT_SYMBOL_GPL(drm_bridge_connector_init);
diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h
index bf964cdfb330..68b14ac5ac0d 100644
--- a/include/drm/drm_bridge.h
+++ b/include/drm/drm_bridge.h
@@ -739,6 +739,10 @@ struct drm_bridge {
  	 * identifies the type of connected display.
  	 */
  	int type;
+	/**
+	 * @subtype: the subtype of the connector for the DP/TV/DVI-I cases.
+	 */
+	enum drm_mode_subconnector subtype;
  	/**
  	 * @interlace_allowed: Indicate that the bridge can handle interlaced
  	 * modes.




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux