On Thu, Jul 20, 2023 at 03:52:38PM +0200, Luca Ceresoli wrote: > Hello Rob, > > thanks for reviewing. > > On Wed, 19 Jul 2023 13:02:54 -0600 > Rob Herring <robh@xxxxxxxxxx> wrote: > > > On Wed, Jul 19, 2023 at 05:21:46PM +0200, Luca Ceresoli wrote: > > > Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller > > > connected over SPI and the "ShenZhen New Display Co NDS040480800-V3" > > > 480x800 panel based on it. > > > > > > Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> > > > --- > > > .../display/panel/ilitek,ili9806e.yaml | 69 +++++++++++++++++++ > > > MAINTAINERS | 6 ++ > > > 2 files changed, 75 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > > > new file mode 100644 > > > index 000000000000..42abc6923065 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml > > > @@ -0,0 +1,69 @@ > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > > +%YAML 1.2 > > > +--- > > > +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml# > > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > > + > > > +title: Ilitek ILI9806E display panels > > > + > > > +maintainers: > > > + - Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx> > > > + > > > +description: > > > + This binding is for display panels using an Ilitek ILI9806E controller in > > > + SPI mode. > > > + > > > +allOf: > > > + - $ref: panel-common.yaml# > > > > A SPI device should reference spi-peripheral-props.yaml as well. > > > > > + > > > +properties: > > > + compatible: > > > + items: > > > + - enum: > > > + # ShenZhen New Display Co 3.97" 480x800 RGB a-SI TFT LCD > > > + - newdisplay,nds040480800-v3 > > > + - const: ilitek,ili9806e > > > + > > > + reg: true > > > > maxItems: 1 > > > > > + spi-max-frequency: true > > > + reset-gpios: true > > > + backlight: true > > > + port: true > > > > Drop all these and ... > > > > > + > > > +required: > > > + - compatible > > > + - reg > > > + - port > > > + > > > +additionalProperties: false > > > > ... use "unevaluatedProperties" instead. > > > > > + > > > +examples: > > > + - | > > > + #include <dt-bindings/gpio/gpio.h> > > > + > > > + backlight: backlight { > > > + compatible = "gpio-backlight"; > > > + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; > > > + }; > > > > The exact backlight is outside the scope of this binding and should be > > dropped from the example. > > As this comes from copy-pasting from the bindings yaml for another > panel, would it be useful if I send a patch to remove it? Yes. Rob
